Traveling Aircraft Mechanic II (Sheet Metal)

We need to output HTML fragment with sections: About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule. Only include sections that have real specific content. The posting includes description of duties (responsibilities), qualifications (minimum qualifications), knowledge/skills/abilities (skills), compensation details (pay), benefits overview (benefits). Also travel requirement maybe part of responsibilities or schedule? Travel up to 75% could be schedule? It's about travel requirement, could be under Responsibilities or maybe a separate section like Travel but not required. We'll include sections: About the role (maybe a brief summary), Responsibilities (list of duties), Requirements (maybe minimum qualifications?), Qualifications (maybe same as requirements? The instruction says use headings for section headings like About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule. We need to decide which to include. We have content: description of job (what they do) could be About the role. Then list of duties (manufactures, fabricates, etc.) could be Responsibilities. Minimum Qualifications could be Requirements or Qualifications. Knowledge, Skills, And Abilities could be Skills. Compensation Details -> Pay. Benefits Overview -> Benefits. Travel requirement maybe Schedule? It says Travel Team- Must be available to Travel up to 75% of the time, as operationally required. That's about schedule/travel. Could be Schedule section. Physical Requirements / Work Environment maybe could be part of Requirements? But we have a Requirements heading; we could put physical requirements there. However we already have minimum qualifications; maybe we put those under Requirements. Qualifications could be something else like "Preferred qualifications"? Not present. So we might skip Qualifications heading if no distinct content. But we need to avoid empty headings. So we will include only sections with real content: About the role, Responsibilities, Requirements (minimum qualifications + physical requirements?), Skills, Benefits, Pay, Schedule (travel). Let's craft. We must not repeat job title as heading. No Job ID etc. Remove boilerplate like EEO, original posting dates, etc. Also remove "Note: Benefits may vary..." maybe keep as part of benefits? It's still substantive but it's a note; we can keep it as part of benefits paragraph. The instruction: preserve ALL substantive information; do NOT invent or summarize away detail. So we keep notes. We need to use

for section headings. Use

• for any list of duties/requirements/benefits. Use

  for prose. We need to ensure we don't include filler like "commensurate with experience". Not present. Let's extract content. About the role: Could be first sentence: "The Traveling Aircraft Mechanic II (Sheet Metal) performs the full range of aircraft maintenance with primary responsibility for sheet metal and structural repair." That's a good summary. Responsibilities: list of duties: Manufactures and fabricates aircraft sheet metal parts, panels, doors, etc., from various serviced aircraft. Such aircraft articles have numerous combined straight and curved edges or irregular curves and planes such as fuselage, door assemblies, windshield panel angles, washers, firewalls and straight brackets. Such sheet metal stock/parts/items consist of various types of metal, e.g., steel stainless steel, aluminum, corrugated aluminum, titanium, iron, brass, copper, magnesium, rubber, plastic, plexiglass, fiberglass, etc. Determines type and extent of repair or replacement required, type of material and repair methods to use. Lays out, cuts forms, joins, assembles and installs items. Read and analyzes work request and applicable specifications or similar work data. Develops parts and templates from prints, drawings, or original parts to produce repair parts that are not readily available. To accomplish the development of these parts or templates plans, layouts, cuts, forms, shapes and assembles complex sheet metal items. Also, may use developed patterns/layouts, prefabricated templates or old part as a sample, scribes outline on sheet metal and cuts out scribed part using shears, Do-All saw and turret punch. Forms metal using cornice brake, punch press, drill press, and similar metal forming tools. Finish and smooth edges of metal sheet after cutting and assembles component sheet metal piece with rivets, screws, nuts and bolts. Aligns, drills and reams material for installation of various types of riveting and taking precautions to protect dissimilar metals. Applies necessary protective compounds, special insulating protective tape, plastic cement, fiberglass resins, etc. Independently lays out template, transcribes information from template and manufactures double contour parts with configuration in several planes. Assembles and fastens fabricated parts by installing bolts, rivets, screws and/or seaming. Develop and draw working sketches showing view, section, or profile. Ensures finished aircraft parts meet quality standards for soundness, strength, appearance in accordance with specification and/or similar requirements. Also maybe "Travel Team- Must be available to Travel up to 75% of the time, as operationally required." That could be schedule. Requirements: Minimum Qualifications: Valid FAA Airframe & Powerplant (A&P) License, two (2) years aviation maintenance experience, three (3) years rotary wing aircraft experience, two (2) years’ experience on assigned Mission Design Series (MDS) aircraft. All experience must be within the five (5) most recent years. If no A&P License, shall have three (3) years aviation maintenance experience, three (3) years rotary wing aircraft experience and two (2) years on assigned MDS aircraft. All experience must be within the five (5) most recent years. Must be able to obtain and maintain facility credentials/authorization. Note: US Citizenship is required for facility credentials/authorization at this work site. Tools are required; must provide own tool and toolbox. All tools must be shadowed and etched with PID. Physical Requirements / Work Environment: Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day. Must be able to climb stairs, ramps, ladders, and work stands. Must be able to climb, stand, stoop, bend, stretch, crouch, and work in tiring and uncomfortable positions. Must be able to type using a standard keyboard to communicate through e-mail and various software applications. Will be required to wear proper Personal Protective Equipment (PPE). May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc. Must be able to lift/push/pull minimum of 50 pounds. May work in maintenance shop or outside and may be expected to work in all-weather conditions. May be exposed to extreme noise from operating equipment or electrical shock hazards or work near moving mechanical parts or vehicles. We could combine Minimum Qualifications and Physical Requirements under Requirements heading as a list? But they are not exactly a list; we could separate into two sub-sections? But we only allowed headings from list; we could put both as

  items under Requirements. However physical requirements are not exactly qualifications but could be considered requirements. We'll include them as list items. Skills: Knowledge, Skills, And Abilities: Thorough knowledge of aircraft sheet metal and structural repair and modification. Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures, and replacement of parts. Basic knowledge of electrical theory and a thorough knowledge of aircraft tools including test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes, and shears. Working knowledge of aircraft logbooks, military technical publications, and maintenance data systems. Ability to read and interpret blueprints, drawings, and technical manuals. Ability to lead small teams and prioritize workload to meet mission requirements. Benefits: Benefits Overview: Our health and welfare benefits are designed to support you and your priorities. Offerings include: Health, dental, and vision insurancePaid time off and holidaysRetirement benefits (including 401(k) matching)Educational reimbursementParental leaveEmployee stock purchase planTax-saving optionsDisability and life insurancePet insurance Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits. Pay: Compensation Details: $36.88 The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws. Schedule: Travel Team- Must be available to Travel up to 75% of the time, as operationally required. We should not include "Original Posting: 09/24/2026 - Until Filled" etc. Also remove EEO boilerplate. Now produce HTML fragment. We'll wrap each section with

  heading then content. For lists: use

  • each item. We need to ensure we don't duplicate content. Let's craft. About the role:

    The Traveling Aircraft Mechanic II (Sheet Metal) performs the full range of aircraft maintenance with primary responsibility for sheet metal and structural repair.

    Responsibilities: we can break into multiple
  • items. Many sentences; we can split by major actions. I'll create list items: - Manufactures and fabricates aircraft sheet metal parts, panels, doors, etc., from various serviced aircraft. - Works with aircraft articles having numerous combined straight and curved edges or irregular curves and planes such as fuselage, door assemblies, windshield panel angles, washers, firewalls and straight brackets. - Handles sheet metal stock/parts/items consisting of various types of metal, e.g., steel, stainless steel, aluminum, corrugated aluminum, titanium, iron, brass, copper, magnesium, rubber, plastic, plexiglass, fiberglass, etc. - Determines type and extent of repair or replacement required, type of material and repair methods to use. - Lays out, cuts, forms, joins, assembles and installs items. - Reads and analyzes work request and applicable specifications or similar work data. - Develops parts and templates from prints, drawings, or original parts to produce repair parts that are not readily available. - Plans, layouts, cuts, forms, shapes and assembles complex sheet metal items to develop parts or templates. - May use developed patterns/layouts, prefabricated templates or old part as a sample, scribes outline on sheet metal and cuts out scribed part using shears, Do-All saw and turret punch. - Forms metal using cornice brake, punch press, drill press, and similar metal forming tools. - Finishes and smooths edges of metal sheet after cutting and assembles component sheet metal piece with rivets, screws, nuts and bolts. - Aligns, drills and reams material for installation of various types of riveting and takes precautions to protect dissimilar metals. - Applies necessary protective compounds, special insulating protective tape, plastic cement, fiberglass resins, etc. - Independently lays out template, transcribes information from template and manufactures double contour parts with configuration in several planes. - Assembles and fastens fabricated parts by installing bolts, rivets, screws and/or seaming. - Develops and draws working sketches showing view, section, or profile. - Ensures finished aircraft parts meet quality standards for soundness, strength, appearance in accordance with specification and/or similar requirements. That covers. Requirements: combine minimum qualifications and physical requirements. List items: - Valid FAA Airframe & Powerplant (A&P) License, two (2) years aviation maintenance experience, three (3) years rotary wing aircraft experience, two (2) years’ experience on assigned Mission Design Series (MDS) aircraft; all experience within the five (5) most recent years. - If no A&P License: three (3) years aviation maintenance experience, three (3) years rotary wing aircraft experience and two (2) years on assigned MDS aircraft; all experience within the five (5) most recent years. - Must be able to obtain and maintain facility credentials/authorization; US Citizenship is required for facility credentials/