Supervisory Interdisciplinary, GS-08XX/1315-13 (16388)

Position Overview

Direct-Hire Authority (DHA) position. Permanent. USACE Organization: Southwestern Division (SWD) – Tulsa District. Location: Tulsa, OK.

Key Duties

• Serves as the Chief of Technical Services Section, H&H Branch and is responsible for Water Control Data System (WCDS) water management programs, the district stream gauge program to support Water Management, and the district Water Supply program.
• Plans and reviews work, sets priorities, and makes assignments for all working groups.
• Ensures timely performance of a satisfactory amount and quality of work.
• Evaluates performance, gives advice and counsel on work and matters, interviews candidates for employment and recommends personnel actions.
• Grants leave, identifies developmental and training needs of subordinates, and provides for such training and development.
• Provides technical engineering support for the WCDS, both in-house and in the field, regarding system software, operating instructions, maintenance, testing, and repair.
• Manages district water supply mission.
• Facilitates water supply planning in the development of methodologies, procedures and engineering computer programs to process, analyze, display and disseminate hydrologic data required in water supply activities.
• Supervise the district water supply specialist who manages day-to-day water supply related affairs.
• Responsible for the district stream gaging programs, installing operating and maintaining an extensive network of over 100 lake and stream flow stations, water quality monitoring equipment, and automated data collection and transmittal equipment which is located over approximately 150,000 square miles in several states.

Specialized Experience

One year of specialized experience which includes meeting 3 out of 5 following duties: (1) performing hydraulic/hydrologic modeling on a water system; OR (2) engaging on flood response initiatives; OR (3) analyzing technical data from instrumentation systems and surveys to evaluate Civil Projects; OR (4) providing input for budget and resource planning for Civil Projects/personnel; OR (5) preparing technical reports. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-12).

Qualifications

This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of the DoD, Section 9905 to recruit and appoint qualified candidates to positions in the competitive service. Veterans' preference does not apply to this announcement.

In order to qualify for this position you must meet both the Specialized Experience and the Basic Education below:

Basic Education Requirement for General Engineer 0801, Civil Engineer Series 0810, Mechanical Engineer 0830, Electrical Engineer 0850:

Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

• Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
• Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
• Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.
• Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

Basic Requirement For Architecture Series 0808:

Degree: Bachelor's degree (or higher degree) in architecture or in a related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems.

OR Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following: (1) Related Curriculum - Degree in architectural engineering provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in statement A above, or (2) Experience: 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of any college courses, 5 years of such experience is required. This experience must have demonstrated that you have acquired a thorough knowledge of the fundamental principles and theories of professional architecture.

Basic Requirements For Hydrology Series 1315:

Degree: physical or natural science, or engineering that included at least 30 semester hours in any combination of courses in hydrology, the physical sciences, geophysics, chemistry, engineering science, soils, mathematics, aquatic biology, atmospheric science, meteorology, geology, oceanography, or the management or conservation of water resources. The course work must have included at least 6 semester hours in calculus (including both differential and integral calculus), and at least 6 semester hours in physics. Calculus and physics, as described above, are requirements for all grade levels.

OR Combination of education and experience -- course work as shown in A above, plus appropriate experience or additional education.

Evaluation of Experience: Acceptable experience must have included performance of scientific functions related to the study of water resources, based on and requiring a professional knowledge of related sciences and the consistent application of basic scientific principles to the solution of theoretical and practical hydrologic problems. The following is illustrative of acceptable experience: field or laboratory work that would require application of hydrologic theory and related sciences such as geology, geo-chemistry, geophysics, or civil engineering to making observations, taking samples, operating instruments, assembling data from source materials, analyzing and interpreting data, and reporting findings orally and in writing. In some cases, professional scientific experience that is not clearly water resource experience may be acceptable if such experience was preceded by appropriate education in hydrology or by professional hydrology experience. Applicants with related experience in hydrology gained through earlier Federal Government employment might have gained that experience in one or more occupational series. Such series include Soil Conservation, GS-457; Forestry, GS-460; Soil Science, GS-470; Civil Engineering, GS-810; Chemistry, GS-1320; Meteorology, GS-1340; and Geology, GS-1350. Comparable non-Federal experience may be given similar credit.

NOTE: You MUST provide a copy of your transcripts with your application package or you will be rated ineligible.

Position requires Professional Engineering Registration, OR a PH (professional hydrologist), OR a RA a Registered Architect.

Other Conditions And Requirements

• Applications must be submitted after 12:01 AM (EST) of the posted Job Posting Open Date and before 11:45 PM (EST) of the posted Job Posting Close Date to receive consideration.
• All positions require the applicant to be a citizen of the United States.
• Male applicants born after December 31, 1959, are required to register for Selective Service prior to appointment.
• A trial or probationary period may be required.
• Direct deposit of pay is required.
• This position has a Temporary Duty (TDY) or business travel requirement of 25% of the time.
• This position is eligible for situational teleworking only.
• If you are relying on your education to meet qualification requirements: Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
• FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited program.