NDT VT Level II / CWI Inspector
for section headings (e.g., About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule). But we can also use other headings if they match content? The instruction: "use for section headings (e.g. About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule)." It suggests we should use those headings if we have those sections. However we can also use other headings? It says use for section headings (e.g. About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule). Likely they want us to map content to those standard headings. But we can also include other headings if needed? The instruction: "Use for section headings (e.g. About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule)." It doesn't forbid other headings, but suggests we should use those typical ones. However we must include a section ONLY when the posting has real, specific content for it — never emit a heading followed by filler/placeholder text. So we need to decide which sections to include based on content.
We have content for: About the role (Position Overview). Responsibilities (Key Responsibilities). Requirements (Required Experience & Qualifications, Code & Inspection Knowledge, VT Level II Qualification Prior to Mobilization). Qualifications maybe overlapping. Skills maybe Preferred Background. Benefits (Travel Package). Pay (Hourly pay range). Schedule (Project Duration & Schedule). Physical Requirements maybe could be part of Requirements or separate? Could be a separate section but not in list; but we could include under Requirements or maybe as its own section "Physical Requirements". The instruction didn't list Physical Requirements as example but we could still use for it; it's okay.
We must not repeat job title as heading. Do not put Job ID/requisition numbers as headings. Remove boilerplate etc.
We need to preserve all substantive information. So we need to include details.
We'll produce HTML with headings and appropriate
for section headings (e.g. About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule). Likely they want us to map content to those standard headings. But we can also include other headings if needed? The instruction: "Use for section headings (e.g. About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule)." It doesn't forbid other headings, but suggests we should use those typical ones. However we must include a section ONLY when the posting has real, specific content for it — never emit a heading followed by filler/placeholder text. So we need to decide which sections to include based on content.
We have content for: About the role (Position Overview). Responsibilities (Key Responsibilities). Requirements (Required Experience & Qualifications, Code & Inspection Knowledge, VT Level II Qualification Prior to Mobilization). Qualifications maybe overlapping. Skills maybe Preferred Background. Benefits (Travel Package). Pay (Hourly pay range). Schedule (Project Duration & Schedule). Physical Requirements maybe could be part of Requirements or separate? Could be a separate section but not in list; but we could include under Requirements or maybe as its own section "Physical Requirements". The instruction didn't list Physical Requirements as example but we could still use for it; it's okay.
We must not repeat job title as heading. Do not put Job ID/requisition numbers as headings. Remove boilerplate etc.
We need to preserve all substantive information. So we need to include details.
We'll produce HTML with headings and appropriate
for it; it's okay.
We must not repeat job title as heading. Do not put Job ID/requisition numbers as headings. Remove boilerplate etc.
We need to preserve all substantive information. So we need to include details.
We'll produce HTML with headings and appropriate
or
- .
Let's extract content.
Position Overview paragraph: "FST Technical Services is seeking experienced Certified Welding Inspectors (CWIs) and/or Visual Testing (VT) Inspectors with experience and technical knowledge consistent with an NDT VT Level II to support a pharmaceutical construction project in Springfield, Missouri. This is a short-term assignment anticipated to last approximately 90-120 days, with all approved project-related travel expenses covered by FST, including airfare, hotel accommodations, rental vehicle, and meals and incidentals at the applicable current GSA rate for Springfield, Missouri. While this opportunity is short term in scope, FST’s expectation is that we will work to have continued employment available after this project is complete. The primary focus of this role will be the visual inspection of welded process piping, sanitary/high-purity piping, mechanical systems, and associated installations within a regulated pharmaceutical construction environment. Candidates are not required to currently hold an NDT VT Level II certification. Candidates must, however, possess sufficient previous visual inspection experience, technical knowledge, and practical skills to successfully complete FST's required VT Level II qualification process after hire and prior to mobilization to the project site."
We'll put that under About the role.
Responsibilities: list from "Key Responsibilities". We'll bullet each.
Requirements: combine "Required Experience & Qualifications" and "Code & Inspection Knowledge" and "VT Level II Qualification Prior to Mobilization". Could be separate sub-sections but we can just list bullet points.
Qualifications maybe same as Requirements; but we can have a Qualifications section for certifications: "A current AWS Certified Welding Inspector (CWI) credential is highly desirable. Previous NDT VT Level II qualification or certification is also highly desirable but is not required at the time of hire."
Skills: maybe "Preferred Background" bullet list.
Benefits: Travel Package details.
Pay: Hourly pay range.
Schedule: Project Duration & Schedule.
Physical Requirements: separate.
Why Join FST: maybe we can include as a short paragraph under About the role or separate "Why Join FST". Could be a section but not in list; but we can include as a section "Why Join FST". It's okay.
We must not include boilerplate like "Powered by JazzHR 4QHRQGaWgZ". Remove.
Now produce HTML.
We'll need to ensure we don't create empty sections.
Let's craft.
About the role
FST Technical Services is seeking experienced Certified Welding Inspectors (CWIs) and/or Visual Testing (VT) Inspectors with experience and technical knowledge consistent with an NDT VT Level II to support a pharmaceutical construction project in Springfield, Missouri. This is a short-term assignment anticipated to last approximately 90-120 days, with all approved project-related travel expenses covered by FST, including airfare, hotel accommodations, rental vehicle, and meals and incidentals at the applicable current GSA rate for Springfield, Missouri. While this opportunity is short term in scope, FST’s expectation is that we will work to have continued employment available after this project is complete. The primary focus of this role will be the visual inspection of welded process piping, sanitary/high-purity piping, mechanical systems, and associated installations within a regulated pharmaceutical construction environment. Candidates are not required to currently hold an NDT VT Level II certification. Candidates must, however, possess sufficient previous visual inspection experience, technical knowledge, and practical skills to successfully complete FST's required VT Level II qualification process after hire and prior to mobilization to the project site.
Responsibilities
- Perform visual inspection of process piping, sanitary/high-purity piping, welds, tubing, mechanical systems, and associated components
- Evaluate welds and installations against applicable project specifications, drawings, procedures, codes, and acceptance criteria
- Apply applicable ASME, B31.3, and BPE requirements during inspection activities
- Inspect weld fit-up, joint preparation, alignment, completed weld profiles, and workmanship
- Identify visible weld discontinuities, defects, and nonconforming installations
- Review weld maps, weld logs, inspection reports, material documentation, and associated QA/QC records
- Verify piping installations against P&IDs, isometric drawings, specifications, and approved construction documentation
- Support inspection of sanitary and high-purity piping systems, including orbital-welded systems where applicable
- Accurately document inspection results in accordance with project QMS requirements
- Communicate deficiencies and nonconforming conditions to project QA/QC and construction personnel
- Verify corrective actions and support deficiency closeout
- Participate in system walkdowns, punch-list activities, turnover inspections, and final documentation review
- Coordinate effectively with contractors, subcontractors, QA/QC personnel, construction management, and client representatives
Requirements
- Substantial hands‑on experience performing visual inspection of welded piping and mechanical systems at a level consistent with the responsibilities of an NDT VT Level II Inspector
- Experience with visual inspection and evaluation of welded piping systems
- Experience with weld fit‑up, joint preparation, alignment, weld profiles, and workmanship
- Ability to identify and evaluate visible weld discontinuities and unacceptable conditions
- Application of applicable codes, standards, specifications, drawings, and acceptance criteria
- Experience inspecting process piping and mechanical systems
- Familiarity with weld maps, weld logs, inspection reports, material documentation, and QA/QC records
- Ability to read and interpret P&IDs, piping isometrics, construction drawings, specifications, and welding documentation
- Capability to work independently in the field and accurately document inspection results
- Working inspection knowledge applicable to pharmaceutical process piping, including ASME requirements for welding and inspection, ASME B31.3 – Process Piping, ASME BPE – Bioprocessing Equipment, visual weld inspection and applicable acceptance criteria, process piping fabrication and installation, sanitary and high‑purity stainless‑steel piping and tubing, weld documentation and traceability
- Experience with orbital welding, sanitary/high‑purity piping, and pharmaceutical or life‑sciences construction is strongly preferred
- Must be able to complete FST’s required VT Level II qualification process after hire and prior to mobilization (includes examinations, practical evaluation, personnel qualification records, Level III review and approval, and visual acuity examination per ASME BPE)
Qualifications
- A current AWS Certified Welding Inspector (CWI) credential is highly desirable
- Previous NDT VT Level II qualification or certification is also highly desirable but is not required at the time of hire
Skills
- Pharmaceutical, biotechnology, life‑sciences, semiconductor, food/beverage, or other high‑purity manufacturing construction experience
- Strong ASME B31.3 process piping inspection experience
- Working knowledge of ASME BPE requirements
- Sanitary/high‑purity stainless‑steel piping experience
- Orbital welding inspection experience
- Borescope inspection experience (preferred)
- Weld mapping and weld traceability experience
- QA/QC turnover documentation experience
Benefits
- FST will cover approved project‑related travel expenses for the Springfield assignment, including:
- Round‑trip airfare/flights
- Hotel accommodations
- Rental vehicle
- Fuel and approved project‑related transportation expenses
- Meals and incidentals at the current applicable GSA rate for Springfield, Missouri
- Other approved project travel expenses in accordance with company policy
Pay
Hourly pay range: $45 to $65 per hour based on experience
Schedule
The anticipated project duration is approximately 90‑120 days. Candidates should be prepared to commit to the project for the duration of the assignment. Work schedules may include extended hours, overtime, and/or weekend work depending on project requirements.
Physical Requirements
Candidates must be able to work safely in an active pharmaceutical/industrial construction environment, including prolonged standing and walking, climbing stairs and ladders, bending, stooping, kneeling, accessing piping installations, wearing required PPE, and performing detailed visual inspections under varying field conditions. Potentially working from heights on ladders, scaffolding and wearing safety harness gear.
Why Join FST
FST Technical Services provides quality assurance, quality control, commissioning, and technical services for technically demanding construction projects throughout the United States. This assignment is an excellent opportunity for experienced CWIs and visual welding/piping inspectors to apply their skills on a major pharmaceutical project while receiving a comprehensive company‑paid travel package. If you have strong visual weld inspection experience, process piping knowledge, and experience consistent with an NDT VT Level II Inspector - even if you