1452 | Non-Destruc Test Tech 2 - 1st Shift

About the role

The primary responsibility of the Certified Non-Destruct Test Technician Level 2 is to test and inspect parts and assemblies for defects using automated and manual methods and techniques including radiography, ultrasound, penetrant, eddy current, laser shearography and magnetic particle.

Responsibilities

• Adherence to safety procedures/guidelines at all times.
• Maintain safety precautions at all times.
• Keep work area in a clean and orderly condition.
• Perform specific inspections and specific evaluations for acceptance or rejection determinations according to written instructions and to record results.
• Perform NDT Examinations in conjunction with receipt and in-process inspections on material purchased for use in fabrication.
• Familiar with the tools and equipment and shall have demonstrated proficiency in their use.
• Capable of determining the calibration status of inspection and measuring equipment is in proper condition for use, and that inspection, examination and test procedures are approved.
• Capable of assisting production in the set-up of material and/or components for receipt inspection, as required.
• Train other individuals as required by management.

Requirements

• Must demonstrate the ability to read the equivalent of the size and letters of the Jaeger I chart at a minimum distance of 12 inches and distinguish and differentiate the contrasts between colors illustrated on an Ishihara Test Chart.
• Inspection personnel shall be able to lift, carry, push, pull or otherwise move objects weighing up to 50 pounds.
• May work alone with minimal supervision or with other personnel.
• Inspection personnel shall possess fundamental written and verbal communication skills.
• Inspection personnel shall be fluent (written and verbal) in the English language.
• Computer skills, especially familiarity with MS Office applications, are necessary.
• Comfortable working in a fast‑paced team environment.
• Supports Quality Control Manager, Shop Managers, Production Supervisors, Product Line Managers.
• Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident).

Qualifications

• Required: High School diploma or equivalent with at least 2 years of inspection related experience.
• Preferred: 2 years of inspection related experience.
• Must be qualified to be certified as a Level 2 to NAS 410 in one or more of the following NDT Methods that will be utilized:
  • Fluorescent Penetrant Inspection (FPI).
  • Magnetic Particle Inspection (MPI).
  • Certified Level 2 Magnetic Particle Inspector is a MUST.
• Ability to communicate, read, and understand English.
• Ability to read blue prints/drawings.
• Ability to follow precise instructions.
• Ability to work around hazardous chemicals.
• Must have excellent hand/eye coordination.
• Ability to work well with others as part of a team.
• Able to multi‑task and open to working overtime.

Schedule

7:00AM - 3:30PM