1165 | Lidar Mapping data collector USA

About the role

We are looking for an experienced B2B contractor to perform LiDAR and 360° mapping in California. The role involves traveling to different locations within the state, requiring comfort with travel and temporary relocation. Fuel and accommodation expenses will be covered.

Responsibilities

• Perform field-based geospatial data collection using a LiDAR system.
• Set up, calibrate, and operate the LiDAR system to ensure high-quality and accurate data.
• Work with one of the following equipment setups (as applicable):
  • Drone-based LiDAR: own LiDAR system, proven experience with drone-based LiDAR data collection, valid US drone pilot license, piloting skills, and surveying/geospatial work experience.
  • Vehicle-based LiDAR: LiDAR system mounted on a vehicle (owned or rented), proven experience with vehicle-based LiDAR systems, possible assistance with licensing/documentation.
  • Pedestrian-based LiDAR: use a LiDAR sensor (laser‑based) with expertise to configure, calibrate, and operate; preference for setups including GNSS and IMU for accurate positioning; a 360° camera may be provided but is not mandatory.

Requirements

• Hands‑on experience with LiDAR systems.
• Own equipment that meets the project requirements (LiDAR system is mandatory).
• Strong knowledge of LiDAR system setup and calibration.
• Experience with surveying or geospatial data collection.
• Willingness to travel and temporarily relocate within California.
• Availability to work with field equipment throughout the project.

Benefits

• Fuel and accommodation expenses related to travel are covered.
• A 360° camera can be provided by the employer (advantage if you have your own).