Welder
ICS, Inc (Industrial Contract Services) · Grand Forks, ND · 1 mo ago
Full-time
We need to output HTML fragment with sections only if real content. Use for headings: About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule. The posting includes: Work Schedule: Days and hours vary depending on the assigned project. That's schedule info, but it's vague: "Days and hours vary depending on the assigned project." That's not specific; but it's still schedule info. The rule: never create Pay/Schedule/Benefits sections unless the posting actually states them. It does state schedule: "Days and hours vary depending on the assigned project." That's somewhat vague but it's still schedule. Should we include? It says "Prefer a few substantive sections over many thin ones." The schedule is vague but it's still content. Might include Schedule section with that sentence.
Responsibilities & Duties: a long list. We'll put under
for headings: About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule. The posting includes: Work Schedule: Days and hours vary depending on the assigned project. That's schedule info, but it's vague: "Days and hours vary depending on the assigned project." That's not specific; but it's still schedule info. The rule: never create Pay/Schedule/Benefits sections unless the posting actually states them. It does state schedule: "Days and hours vary depending on the assigned project." That's somewhat vague but it's still schedule. Should we include? It says "Prefer a few substantive sections over many thin ones." The schedule is vague but it's still content. Might include Schedule section with that sentence.
Responsibilities & Duties: a long list. We'll put under Responsibilities
with - each duty.
Required Education: "High school diploma or equivalent GED." That's qualification/education. Could go under Requirements or Qualifications. We'll use Requirements for education and experience.
Required Experience: "Minimum of 6 months experience, one year certificate from a technical school or an equivalent combination of education and experience". That's experience.
Required Skills/Licenses/Certifications: list includes: Must be able to pass the required welding certification test, Valid driver’s license, Read and interpret documents, Add and subtract..., Ability to calculate..., Apply common sense..., Workers should be able to work within precise standards..., Supervisory Responsibility None. That's skills/licenses.
Physical Demands & Working Conditions: could be under Requirements or maybe a separate section? Not in list of allowed headings; we could put under Requirements or Qualifications. Probably under Requirements as part of qualifications.
Work Environment: also could be under Requirements.
Travel Requirement: "May be required to travel to different jobsites on limited notice". Could be under Requirements or maybe under Schedule? Not exactly. Could be under Requirements.
Other duties as assigned: could be under Responsibilities.
We need to avoid boilerplate: remove cookie/navigation/legal/EEO etc. None present.
We must not repeat job title as heading.
We must not put Job ID/requisition numbers as headings.
We must not create sections with filler like "commensurate with experience". Not present.
We need to preserve all substantive information. So we need to include all duties, responsibilities, etc.
We'll structure:
Responsibilities
- ... each duty ...
We have many duties; we need to split them into list items. The text includes many sentences; we can break each sentence as a list item.
We must ensure we don't duplicate any duty (there is a duplicate "Weld components in flat, vertical, or overhead positions." appears twice). We should keep only one instance? The rule: Preserve ALL substantive information; do NOT invent or summarize away detail. Duplicate lines are present in source; we should keep them? It says remove duplicated lines. So we should deduplicate. So we need to remove duplicate lines. The duplicate is exactly same sentence appears twice. We'll keep one.
Also there may be other duplicates? We'll check.
List of duties from text:
"Promote and comply with all Company and safety policies and procedures"
"Weld components in flat, vertical, or overhead positions." (duplicate)
"Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits."
"Clamp, hold, tack-weld, heat-bend, grind and/or bolt component parts to obtain required configurations and positions for welding."
"Detect faulty operation of equipment and/or defective materials and notify supervisors."
"Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding."
"Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material."
"Examine work pieces for defects, and measure work pieces with straightedges or templates to ensure conformance with specifications."
"Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment."
"Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers."
"Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment."
"Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations."
"Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained."
"Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys."
"Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques."
"Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter."
"Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications, or types and thicknesses of metals."
"Remove rough spots from work pieces, using portable grinders, hand files, or scrapers."
"Position and secure work pieces, using hoists, cranes, wire, and banding machines or hand tools."
"Clean or degrease parts, using wire brushes, portable grinders, or chemical baths."
"Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools."
"Fill holes and increase the size of metal parts."
"Dismantle metal assemblies or cut scrap metal, using thermal-cutting equipment such as flame-cutting torches or plasma-arc equipment."
"Check grooves, angles, or gap allowances, using micrometers, calipers, and precision measuring instruments."
"Signal crane operators to move large work pieces."
"Guide and direct flames or electrodes on or across work pieces to straighten, bend, melt, or build up metal."
"Develop templates and models for welding projects, using mathematical calculations based on blueprint information."
"Cut metal plates and structural shapes to dimensions, and contour and bevel as specified by blueprints, layouts, work orders, and templates, using powered saws, hand shears, or chipping knives."
"Preheat work pieces prior to welding or bending, using torches or heating furnaces."
"Use fire suppression methods in industrial emergencies."
"Set up and use ladders and scaffolding as necessary to complete work."
"Join parts such as beams and steel reinforcing rods in buildings, bridges, and highways, bolting and riveting as necessary."
"Hammer out bulges or bends in metal work pieces."
"Maintain a professional appearance"
"Other duties as assigned by Foreman or Superintendent"
We need to ensure each is a list item.
Now for Requirements/Education/Experience etc.
We could have a section Requirements
with subpoints? But we only allowed - for any list of duties/requirements/benefits. So we can put education, experience, skills, physical demands, work environment, travel as list items under Requirements.
But we might want to separate Education, Experience, Skills, etc. However the instruction: Prefer a few substantive sections over many thin ones. So we can combine all requirement-like info into one Requirements section.
Thus:
Requirements
- High school diploma or equivalent GED.
- Minimum of 6 months experience, one year certificate from a technical school or an equivalent combination of education and experience.
- Must be able to pass the required welding certification test.
- Valid driver’s license to operate motor vehicles.
- Read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals.
- Add and subtract two-digit numbers and multiply and divide with 10’s and 100’s, ability to perform these operations using unit weight measurements and volumes.
- Ability to calculate rate, ratios and percentages.
- Apply common sense understanding to carry out instructions furnished in written or oral form.
- Workers should be able to work within precise standards of accuracy and follow set procedures and standards.
- Supervisory Responsibility: None.
- Able to bend, stoop, squat, crawl, climb, kneel, balance, push, pull, and reach overhead for extended periods of time.
- Lift and carry at least 50 to 100 pounds.
- Climb and descend all types of ladders.
- Wear personal protective equipment (e.g., hardhat, eye protection, respiratory protection, fall protection, etc.).
- Position requires working in all elements – heat, cold, rain, or snow – depending on job location and time of year.
- May require use of personal vehicle for transportation to and from work site.
- Must be able to utilize job site sanitary facilities (e.g., Portable Toilets).
- May require work in restricted areas (e.g., excavations, utility tunnels, manholes, tanks, crawl spaces, attics, etc.).
- May require working at various heights, up to 100-feet, from ladders, scaffolds, aerial lifts, catwalks, or other safe work areas.
- May be required to travel to different jobsites on limited notice.
We also have "See Tool Requirements" but no details; we should drop as it's not substantive.
We have "Work Schedule: Days and hours vary depending on the assigned project." That's schedule. We'll create a Schedule section.
Schedule
Days and hours vary depending on the assigned project.
We should not create Benefits or Pay sections as none present.
We should not create About the role section unless there is content; we have no generic about role besides maybe the responsibilities list; but we already have Responsibilities. So we skip About the role.
We need to output only HTML fragment.
Check for any leftover boilerplate: none.
Make sure we didn't include any duplicate duty. We removed duplicate weld components line.
Check that we included all duties exactly once. Let's verify list count.
I'll list them with numbers:
1 Promote and comply with all Company and safety policies and procedures
2 Weld components in flat, vertical, or overhead positions.
3 Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
4 Clamp, hold, tack-weld, heat-bend, grind and/or bolt component parts to obtain required configurations and positions for welding.
5 Detect faulty operation of equipment and/or defective materials and notify supervisors.
6 Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding.
7 Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
8 Examine work pieces for defects, and measure work pieces with straightedges or templates to ensure conformance with specifications.
9 Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
10 Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
11 Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment.
12 Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material
Responsibilities
- ... each duty ...
Requirements
with subpoints? But we only allowed- for any list of duties/requirements/benefits. So we can put education, experience, skills, physical demands, work environment, travel as list items under Requirements.
But we might want to separate Education, Experience, Skills, etc. However the instruction: Prefer a few substantive sections over many thin ones. So we can combine all requirement-like info into one Requirements section.
Thus:
Requirements
- High school diploma or equivalent GED.
- Minimum of 6 months experience, one year certificate from a technical school or an equivalent combination of education and experience.
- Must be able to pass the required welding certification test.
- Valid driver’s license to operate motor vehicles.
- Read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals.
- Add and subtract two-digit numbers and multiply and divide with 10’s and 100’s, ability to perform these operations using unit weight measurements and volumes.
- Ability to calculate rate, ratios and percentages.
- Apply common sense understanding to carry out instructions furnished in written or oral form.
- Workers should be able to work within precise standards of accuracy and follow set procedures and standards.
- Supervisory Responsibility: None.
- Able to bend, stoop, squat, crawl, climb, kneel, balance, push, pull, and reach overhead for extended periods of time.
- Lift and carry at least 50 to 100 pounds.
- Climb and descend all types of ladders.
- Wear personal protective equipment (e.g., hardhat, eye protection, respiratory protection, fall protection, etc.).
- Position requires working in all elements – heat, cold, rain, or snow – depending on job location and time of year.
- May require use of personal vehicle for transportation to and from work site.
- Must be able to utilize job site sanitary facilities (e.g., Portable Toilets).
- May require work in restricted areas (e.g., excavations, utility tunnels, manholes, tanks, crawl spaces, attics, etc.).
- May require working at various heights, up to 100-feet, from ladders, scaffolds, aerial lifts, catwalks, or other safe work areas.
- May be required to travel to different jobsites on limited notice.
Schedule
Days and hours vary depending on the assigned project.
We should not create Benefits or Pay sections as none present. We should not create About the role section unless there is content; we have no generic about role besides maybe the responsibilities list; but we already have Responsibilities. So we skip About the role. We need to output only HTML fragment. Check for any leftover boilerplate: none. Make sure we didn't include any duplicate duty. We removed duplicate weld components line. Check that we included all duties exactly once. Let's verify list count. I'll list them with numbers: 1 Promote and comply with all Company and safety policies and procedures 2 Weld components in flat, vertical, or overhead positions. 3 Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. 4 Clamp, hold, tack-weld, heat-bend, grind and/or bolt component parts to obtain required configurations and positions for welding. 5 Detect faulty operation of equipment and/or defective materials and notify supervisors. 6 Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding. 7 Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material. 8 Examine work pieces for defects, and measure work pieces with straightedges or templates to ensure conformance with specifications. 9 Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment. 10 Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers. 11 Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment. 12 Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material