Headset Assembler 1st Shift (7AM-3:30PM)

We need to output HTML fragment with sections: headings

for sections like About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule. We must not repeat job title as heading. We need to include only sections that have real specific content. The posting includes: description of company (maybe About the role?), responsibilities (what you'll do), requirements (what you'll bring), qualifications (maybe required and preferred), skills (maybe not separate), benefits (what you'll gain), pay (compensation), schedule (shift time). Also work environment & physical requirements maybe part of responsibilities or qualifications? Could be separate but not in list of allowed headings; we could put under Responsibilities or Qualifications. The instruction: Use

for section headings (e.g. About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule). So we can use those headings if content exists. We must not create sections with filler like "commensurate with experience". We have actual content for many. We need to preserve all substantive info, not invent or summarize away detail. Remove boilerplate: EEO, E-Verify, etc. Also remove navigation, cookie, legal, duplicated lines, application instructions. The posting includes "We are an equal opportunity employer..." and E-Verify statement, also "Candidates must be a US Citizen or permanent resident". Those are boilerplate/legal; we should remove them. Also "Unusual Machines is committed to providing reasonable accommodations..." maybe also boilerplate but could be considered substantive? It's about accommodations; might be considered EEO. Probably remove as boilerplate. Also "All employees are required to follow safety, quality, and ESD procedures..." maybe part of work environment; keep? It's procedural but maybe keep as part of Work Environment & Physical Requirements. However we don't have a heading for Work Environment; we could incorporate into Responsibilities or Qualifications. But we have allowed headings; we could put under Responsibilities or Qualifications. The instruction: "Prefer a few substantive sections over many thin ones." So we could combine. Let's extract sections: - About the role: maybe the introductory paragraph about company and role? The posting starts with company description then "Headset Assembler 1st Shift (7AM-3:30PM)" then "You in This Role". That's like About the role. We'll put that in

About the role

with paragraphs. - Responsibilities: "What You’ll Bring" actually is qualifications? Wait "What You’ll Bring" lists required skills. Actually "What You’ll Bring" is requirements. Responsibilities maybe "You’re hands-on, detail-oriented, and take pride in building things the right way. As a Headset Assembler, you’ll be a key part of our production team, assembling and fitting components to deliver headsets used in FPV and drone technology. You enjoy working with your hands, following precise instructions, and contributing to a fast-paced, collaborative environment." That's responsibilities. - Requirements/Qualifications: Could split: Required and Preferred. We could have

Requirements

for required items, and maybe

Preferred Qualifications

but we only have Qualifications heading allowed. Could combine required and preferred under Qualifications with subpoints? But we must not create headings not in list; we could use

Qualifications

and include both required and preferred as lists. - Skills: maybe not needed separately; we could omit. - Benefits: "What You’ll Gain" plus "Compensation - $24.00 Benefits Equity Medical, Dental, and Vision Benefits401(k)Generous PTOPaid HolidaysDaily Catered Lunches". Actually the posting shows "Compensation - $24.00 Benefits Equity Medical, Dental, and Vision Benefits401(k)Generous PTOPaid HolidaysDaily Catered Lunches". It seems formatting messed. We need to extract: Compensation: $24.00 (maybe hourly). Benefits: Equity, Medical, Dental, Vision Benefits, 401(k), Generous PTO, Paid Holidays, Daily Catered Lunches. Also "What You’ll Gain" includes hands-on experience etc. That could be Benefits section. - Pay: we have compensation $24.00. So we can have

Pay

with that. - Schedule: shift time: 1st Shift (7AM-3:30PM). So

Schedule

with that. We must not repeat job title as heading. So no heading for Headset Assembler. We must output only HTML fragment, no /, no markdown. We need to use

• for any list of duties/requirements/benefits. Use

  for prose. We need to preserve all substantive info; do not invent or summarize away detail. Let's gather content: About the role (prose): Combine company description and role intro. Company description: "Unusual Machines is a U.S.-based drone and drone parts company focused on the small and First-Person View (FPV) segments of the drone market. Our brands - Rotor Riot, Fat Shark, Rotor Lab and - coming soon - Upgrade Energy - are some of the most respected names in FPV and have helped shape the industry through e-commerce, product development, and a deep connection with the pilot community. We’re expanding into enterprise and defense - bringing our obsessive attention to performance, design, and U.S.-based manufacturing into high-stakes environments like search and rescue and military innovation. With several of our products already approved by the Defense Innovation Unit, we’re solving procurement issues for customers who demand speed, agility, and compliance. If you love working at the intersection of community, content, and cutting-edge technology, you’ll feel right at home here." Then role intro: "Headset Assembler 1st Shift (7AM-3:30PM) You in This Role You’re hands-on, detail-oriented, and take pride in building things the right way. As a Headset Assembler, you’ll be a key part of our production team, assembling and fitting components to deliver headsets used in FPV and drone technology. You enjoy working with your hands, following precise instructions, and contributing to a fast-paced, collaborative environment." We could combine into a few paragraphs. Responsibilities: maybe the same as role intro? Actually responsibilities could be the duties: assembling and fitting components, following instructions, working with hands, contributing to fast-paced collaborative environment. We'll list as

  • ... etc. But we already used some of that in About the role. To avoid duplication, we need to decide what goes where. The instruction: preserve ALL substantive information; do not invent or summarize away detail. So we need to include all info, but we can organize into sections without duplication. Could put company description in About the role, and responsibilities as bullet list. Let's extract responsibilities bullet points: - Assemble and fit components to deliver headsets used in FPV and drone technology. - Work with hands, following precise instructions. - Contribute to a fast-paced, collaborative environment. - Perform detailed, repetitive assembly tasks. - Meet production expectations. - Comply with ESD, safety, and quality standards. - Follow detailed work instructions. - Perform hands-on, repetitive assembly. - (maybe also) Ability to stand or sit for extended periods (but that's a requirement). We'll keep requirements separate. But some of those are also in requirements. We need to avoid duplication but still preserve all info. Could combine overlapping items under Requirements/Qualifications. Better approach: Use sections: - About the role: company description + brief role overview (maybe not bullet). - Responsibilities: bullet list of duties. - Qualifications: required and preferred (maybe separate subheadings not allowed, but we can embed as two lists with headings

    Required:

    then
    etc. Or we can have

    Requirements

    and

    Preferred Qualifications

    but only Qualifications allowed. Could do

    Qualifications

    then

    Required:

    ...

    Preferred:

    ...
    . - Benefits: bullet list of benefits plus maybe "What You’ll Gain" (which is more like benefits/experience). Could combine. - Pay:

    $24.00 per hour

    (or just "$24.00"). - Schedule:

    1st Shift (7:00 AM – 3:30 PM)

    We also have Work Environment & Physical Requirements; we could incorporate into Responsibilities or Qualifications as bullet list. But we have no heading for that; we could add under Responsibilities as additional bullet points: ability to sit/stand, repetitive hand movements, handle small components, visual inspection, lift up to 25 lbs, work in moderate noise, comply with ESD controls, report concerns. We must not invent or summarize away detail; we need to keep those details. Let's list all substantive info from posting: Company description (as above). Role intro: "You’re hands-on, detail-oriented, and take pride in building things the right way. As a Headset Assembler, you’ll be a key part of our production team, assembling and fitting components to deliver headsets used in FPV and drone technology. You enjoy working with your hands, following precise instructions, and contributing to a fast-paced, collaborative environment." Responsibilities/duties (maybe same as above but we can list): - Assemble and fit components to deliver headsets used in FPV and drone technology. - Work with hands, following precise instructions. - Contribute to a fast-paced, collaborative environment. - Perform detailed, repetitive assembly tasks. - Meet production expectations. - Comply with ESD, safety, and quality standards. - Follow detailed work instructions. - Perform hands-on, repetitive assembly. - (maybe also) Ability to sit or stand for extended periods (but that's a requirement). - Ability to perform repetitive hand, wrist, and finger movements. - Ability to handle small, delicate electronic components. - Ability to visually inspect components and assemblies, including close-up detail work. - Ability to lift and move materials up to 25 lbs with or without reasonable accommodation. - Ability to work in a production environment with moderate noise levels. - Ability and willingness to comply with all ESD controls, including use of wrist straps, mats, grounding equipment, and other required PPE. - All employees are required to follow safety, quality, and ESD procedures and to immediately report any ESD, equipment, or quality concerns. Requirements (required): - High school diploma or GED - Ability to perform detailed, repetitive tasks - Strong hand-eye coordination - Ability to follow written and visual instructions - Basic math skills - Reliable attendance and punctuality - Ability to stand or sit for extended periods Preferred: - Electronics or manufacturing assembly experience - Experience with small components or soldering - Familiarity with production environments - Photonics course certificates/degree programs and or enrollment preferred. What You’ll Gain (benefits/experience): - Hands-on experience in a growing U.S.-based manufacturing environment - The opportunity to work on products used in real-world drone operations—not consumer toys - Stable, consistent work with clear expectations and measurable goals - Skill development in precision assembly, quality control, and electronics handling - Exposure to manufacturing processes that support enterprise and defense-adjacent customers - A team culture that values accountability, craftsmanship, and doing things right the first time - The foundation to grow within production, quality, or technical roles as the company scales Compensation & Benefits: - Compensation: $24.00 (likely per hour) - Benefits: Equity, Medical, Dental, and Vision Benefits, 401(k), Generous PTO, Paid Holidays, Daily Catered Lunches Schedule: 1st Shift (7AM-3:30PM) We also have statement about reasonable accommodations (maybe keep as a note