Weekend 2nd Shift Process Tech III
CFS Brands · Oklahoma City, OK · 3 wk ago
Management$8/hrFull-time
We need to output HTML fragment with sections: headings for sections like About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule. Only include sections that have real content.
We need to parse the job posting.
First, we have description: "The Process Technician is responsible for overseeing that all molding presses are running at standard rates, with correct number of cavities, and that products conform to quality specifications. Assures that all work performed by self or other technicians on all shifts is performed in accordance with established processes, procedures, and practices."
Then "Key Result Areas" bullet list (but it's a paragraph with sentences). We'll treat as responsibilities.
We need to extract responsibilities: list of duties.
Let's list them:
- Assist Production Supervisor and Process Engineer in the activities of setting priorities on machine startups and troubleshooting problem areas.
- Provide direction and/or coordinate color changes, completion of work orders and new startups.
- Ensure maintenance of molds is performed according to instructions and schedule.
- Ensure all molds are properly tagged and work orders written for molds pulled on all shifts.
- Collect start up and shut down samples from each mold and deliver parts to Quality Assurance.
- Inspect mold change set ups on all shifts to ensure equipment, materials, and mold set ups are correct and press is ready for startup.
- Also, prepare, update, and maintain set-up sheets.
- Drive accountability for ensuring cycle information, downtime codes and scrap codes are accurately coded into the Vorne System.
- Ensures machines and molds are cleaned, and resins and colorants are labeled and returned to the compounding area at the completion of a production run.
- Coordinates and communicates with Maintenance and Tool Room on work orders that have been written to ensure the presses/molds are repaired and back into production with a timely period.
- Assists Shift Supervisor in ensuring Mold Hangers and Process Technicians follow proper safety procedures during the operations of molding presses.
- Perform other duties as assigned.
Also earlier: "overseeing that all molding presses are running at standard rates, with correct number of cavities, and that products conform to quality specifications. Assures that all work performed by self or other technicians on all shifts is performed in accordance with established processes, procedures, and practices."
We can include those as responsibilities too.
Now Position Type: Full-time, Non-Exempt.
Knowledge & Experience: One year certificate from college or technical school; or one-year related experience and/or training; or equivalent combination of education and experience.
Qualifications Required Essential Functions | Accountabilities | Performance Measures The type of experience required to effectively perform the essential functions and responsibilities of this position are: High School Diploma is required. Any technical training or certifications is a plus. Experience working in a plastic manufacturing environment. Ability to use machining equipment, tools, and measuring devices. Troubleshooting and problem-solving skills. Willingness to work flexible hours and overtime as needed. Mechanical knowledge or experience. Ability to read and understand multimeter AC/DC/Ohm Injection molding experience, RJG, Robots, Etc.
Communication & Influence: Communicates with contacts typically within the immediate work unit on matters that typically involve obtaining or providing information requiring little explanation or interpretation.
Problem Solving & Complexity: Problems and issues faced are routine and solutions clearly prescribed. Follows a well-established and familiar set of activities and/or process to derive a solution. May have responsibility for checking data and information for minor changes.
Leadership & Talent Management: Focused on self-development.
Certificates | Licenses | Registrations: R J G (PREFERRED)
Travel Required: Up to 10% travel, in support of multiple distribution centers and corporate initiatives.
Work Environment: Manufacturing Physical Demands Wear safety attire and protective gear daily. Usually work indoors/Outdoors. This site may not be temperature controlled. Often exposed to loud sounds and distracting noise levels. Are exposed to hazardous equipment on a weekly basis. May be exposed to contaminant . May share workspace with others. The physical and work environment demands are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Company description: CFS Brands ... (lots). We can include as "About the company" maybe but not required headings. The instruction says use headings for sections like About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule. So we need to map content to these.
We have:
- About the role: maybe a brief overview: The Process Technician is responsible for overseeing that all molding presses are running at standard rates, with correct number of cavities, and that products conform to quality specifications. Assures that all work performed by self or other technicians on all shifts is performed in accordance with established processes, procedures, and practices.
- Responsibilities: list of duties (the bullet list above).
- Requirements: maybe Knowledge & Experience: One year certificate from college or technical school; or one-year related experience and/or training; or equivalent combination of education and experience.
- Qualifications: High School Diploma required; any technical training or certifications a plus; Experience working in a plastic manufacturing environment; Ability to use machining equipment, tools, and measuring devices; Troubleshooting and problem-solving skills; Willingness to work flexible hours and overtime as needed; Mechanical knowledge or experience; Ability to read and understand multimeter AC/DC/Ohm; Injection molding experience, RJG, Robots, Etc.
- Skills: maybe Communication & Influence, Problem Solving & Complexity, Leadership & Talent Management, Certificates | Licenses | Registrations: RJG (preferred). Also maybe Travel Required up to 10% travel.
- Benefits: Not mentioned. So we should NOT create Benefits section.
- Pay: Not mentioned. So no Pay.
- Schedule: The posting includes schedule: "Friday 1:30am to 6:00 am Friday-Sunday 5:30pm to 6:00 am". That seems like shift schedule. So we can include Schedule section with that info.
Also maybe "Position Type: Full-time, Non-Exempt" could be included in About the role or maybe as part of Requirements? But we can include in About the role.
We must not repeat job title as heading.
We must not include boilerplate like EEO etc. Not present.
We must not include duplicated lines.
We must preserve all substantive information.
Now produce HTML fragment.
Structure:
for sections like About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule. Only include sections that have real content.
We need to parse the job posting.
First, we have description: "The Process Technician is responsible for overseeing that all molding presses are running at standard rates, with correct number of cavities, and that products conform to quality specifications. Assures that all work performed by self or other technicians on all shifts is performed in accordance with established processes, procedures, and practices."
Then "Key Result Areas" bullet list (but it's a paragraph with sentences). We'll treat as responsibilities.
We need to extract responsibilities: list of duties.
Let's list them:
- Assist Production Supervisor and Process Engineer in the activities of setting priorities on machine startups and troubleshooting problem areas.
- Provide direction and/or coordinate color changes, completion of work orders and new startups.
- Ensure maintenance of molds is performed according to instructions and schedule.
- Ensure all molds are properly tagged and work orders written for molds pulled on all shifts.
- Collect start up and shut down samples from each mold and deliver parts to Quality Assurance.
- Inspect mold change set ups on all shifts to ensure equipment, materials, and mold set ups are correct and press is ready for startup.
- Also, prepare, update, and maintain set-up sheets.
- Drive accountability for ensuring cycle information, downtime codes and scrap codes are accurately coded into the Vorne System.
- Ensures machines and molds are cleaned, and resins and colorants are labeled and returned to the compounding area at the completion of a production run.
- Coordinates and communicates with Maintenance and Tool Room on work orders that have been written to ensure the presses/molds are repaired and back into production with a timely period.
- Assists Shift Supervisor in ensuring Mold Hangers and Process Technicians follow proper safety procedures during the operations of molding presses.
- Perform other duties as assigned.
Also earlier: "overseeing that all molding presses are running at standard rates, with correct number of cavities, and that products conform to quality specifications. Assures that all work performed by self or other technicians on all shifts is performed in accordance with established processes, procedures, and practices."
We can include those as responsibilities too.
Now Position Type: Full-time, Non-Exempt.
Knowledge & Experience: One year certificate from college or technical school; or one-year related experience and/or training; or equivalent combination of education and experience.
Qualifications Required Essential Functions | Accountabilities | Performance Measures The type of experience required to effectively perform the essential functions and responsibilities of this position are: High School Diploma is required. Any technical training or certifications is a plus. Experience working in a plastic manufacturing environment. Ability to use machining equipment, tools, and measuring devices. Troubleshooting and problem-solving skills. Willingness to work flexible hours and overtime as needed. Mechanical knowledge or experience. Ability to read and understand multimeter AC/DC/Ohm Injection molding experience, RJG, Robots, Etc.
Communication & Influence: Communicates with contacts typically within the immediate work unit on matters that typically involve obtaining or providing information requiring little explanation or interpretation.
Problem Solving & Complexity: Problems and issues faced are routine and solutions clearly prescribed. Follows a well-established and familiar set of activities and/or process to derive a solution. May have responsibility for checking data and information for minor changes.
Leadership & Talent Management: Focused on self-development.
Certificates | Licenses | Registrations: R J G (PREFERRED)
Travel Required: Up to 10% travel, in support of multiple distribution centers and corporate initiatives.
Work Environment: Manufacturing Physical Demands Wear safety attire and protective gear daily. Usually work indoors/Outdoors. This site may not be temperature controlled. Often exposed to loud sounds and distracting noise levels. Are exposed to hazardous equipment on a weekly basis. May be exposed to contaminant . May share workspace with others. The physical and work environment demands are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Company description: CFS Brands ... (lots). We can include as "About the company" maybe but not required headings. The instruction says use headings for sections like About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule. So we need to map content to these.
We have:
- About the role: maybe a brief overview: The Process Technician is responsible for overseeing that all molding presses are running at standard rates, with correct number of cavities, and that products conform to quality specifications. Assures that all work performed by self or other technicians on all shifts is performed in accordance with established processes, procedures, and practices.
- Responsibilities: list of duties (the bullet list above).
- Requirements: maybe Knowledge & Experience: One year certificate from college or technical school; or one-year related experience and/or training; or equivalent combination of education and experience.
- Qualifications: High School Diploma required; any technical training or certifications a plus; Experience working in a plastic manufacturing environment; Ability to use machining equipment, tools, and measuring devices; Troubleshooting and problem-solving skills; Willingness to work flexible hours and overtime as needed; Mechanical knowledge or experience; Ability to read and understand multimeter AC/DC/Ohm; Injection molding experience, RJG, Robots, Etc.
- Skills: maybe Communication & Influence, Problem Solving & Complexity, Leadership & Talent Management, Certificates | Licenses | Registrations: RJG (preferred). Also maybe Travel Required up to 10% travel.
- Benefits: Not mentioned. So we should NOT create Benefits section.
- Pay: Not mentioned. So no Pay.
- Schedule: The posting includes schedule: "Friday 1:30am to 6:00 am Friday-Sunday 5:30pm to 6:00 am". That seems like shift schedule. So we can include Schedule section with that info.
Also maybe "Position Type: Full-time, Non-Exempt" could be included in About the role or maybe as part of Requirements? But we can include in About the role.
We must not repeat job title as heading.
We must not include boilerplate like EEO etc. Not present.
We must not include duplicated lines.
We must preserve all substantive information.
Now produce HTML fragment.
Structure:
About the role
... (overview)
Responsibilities
- ... ...
Requirements
One year certificate from college or technical school; or one-year related experience and/or training; or equivalent combination of education and experience.
Qualifications
- High School Diploma is required.
- Any technical training or certifications is a plus.
- Experience working in a plastic manufacturing environment.
- Ability to use machining equipment, tools, and measuring devices.
- Troubleshooting and problem-solving skills.
- Willingness to work flexible hours and overtime as needed.
- Mechanical knowledge or experience.
- Ability to read and understand multimeter AC/DC/Ohm.
- Injection molding experience, RJG, Robots, Etc.
Skills
- Communicates with contacts typically within the immediate work unit on matters that typically involve obtaining or providing information requiring little explanation or interpretation.
- Problems and issues faced are routine and solutions clearly prescribed; follows a well-established and familiar set of activities and/or process to derive a solution; may have responsibility for checking data and information for minor changes.
- Focused on self-development.
- R J G (PREFERRED) certification/license/registration.
- Up to 10% travel, in support of multiple distribution centers and corporate initiatives.
Schedule
Friday 1:30am to 6:00 am; Friday‑Sunday 5:30pm to 6:00 am.
We might also include Position Type: Full-time, Non-Exempt maybe in About the role paragraph. Let's craft About the role paragraph: "The Process Technician is responsible for overseeing that all molding presses are running at standard rates, with the correct number of cavities, and that products conform to quality specifications. The role assures that all work performed by self or other technicians on all shifts follows established processes, procedures, and practices. Position type: Full-time, Non‑Exempt." Now ensure we didn't miss any responsibilities: The earlier sentence about overseeing and assuring is part of About the role; we could also include as responsibility but it's okay. Check for any other info: "Assist Production Supervisor and Process Engineer in the activities of setting priorities on machine startups and troubleshooting problem areas." etc. Already in responsibilities. Check for "Ensure maintenance of molds is performed according to instructions and schedule." included. Check for "Ensure all molds are properly tagged and work orders written for molds pulled on all shifts." included. Check for "Collect start up and shut down samples from each mold and deliver parts to Quality Assurance." included. Check for "Inspect mold change set ups on all shifts to ensure equipment, materials, and mold set ups are correct and press is ready for startup." included. Check for "Also, prepare, update, and maintain set-up sheets." included. Check for "Drive accountability for ensuring cycle information, downtime codes and scrap codes are accurately coded into the Vorne System." included. Check for "Ensures machines and molds are cleaned, and resins and colorants are labeled and returned to the compounding area at the completion of a production run." included. Check for "Coordinates and communicates with Maintenance and Tool Room on work orders that have been written to ensure the presses/molds are repaired and back into production with a timely period." included. Check for "Assists Shift Supervisor in ensuring Mold Hangers and Process Technicians follow proper safety procedures during the operations of molding presses." included. Check for "Perform other duties as assigned." included. Now check for any other info like "Knowledge & Experience: One year certificate from college or technical school; or one-year related experience and/or training; or equivalent combination of education and experience." That's in Requirements. Check for "Qualifications Required Essential Functions | Accountabilities | Performance Measures The type of experience required to effectively perform the essential functions and responsibilities of this position are: High School Diploma is required.Any technical training or certifications is a plus.Experience working in a plastic manufacturing environment.Ability to use machining equipment, tools, and measuring devices.Troubleshooting and problem-solving skills. Willingness to work flexible hours and overtime as needed. Mechanical knowledge or experience.Ability to read and understand multimeter AC/DC/OhmInjection molding experience, RJG, Robots, Etc." We captured. Check for "Communication & Influence: Communicates with contacts typically within the immediate work unit on matters that typically involve obtaining or providing information requiring little explanation or interpretation." captured. Check for "Problem Solving & Complexity: Problems and issues faced are routine and solutions clearly prescribed. Follows a well-established and familiar set of activities and/or process to derive a solution. May have responsibility for checking data and information for minor changes." captured. Check for "Leadership & Talent Management: Focused on self-development." captured. Check for "Certificates | Licenses | Registrations: R J G (PREFERRED)" captured. Check for "Travel Required: Up to 10% travel, in support of multiple distribution centers and corporate initiatives." captured. Check for "Work Environment: Manufacturing Physical Demands Wear safety attire and protective gear daily. Usually work indoors/Outdoors. This site may not be temperature controlled.Often exposed to loud sounds and distracting noise levels.Are exposed to hazardous equipment on a weekly basis. May be exposed to contaminant . May share workspace with others. The physical and work environment demands are representative of those that must be met by an employee to successfully