Senior Electrical Engineer
Valar Atomics · Castle Dale, UT · 3 wk ago
On-siteEngineeringFull-time
We need to output HTML fragment with sections: About the role? Actually the posting includes "About Valar Atomics", "The Team", "The Role", then responsibilities, qualifications, etc. We need to use for section headings like About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule. We must not repeat job title as heading. We need to include sections only when posting has real specific content.
We have content: About Valar Atomics (company description). The Team (team description). The Role (role description). Then Key Responsibilities (list). Then Basic Qualifications (list). Then Preferred Skills and Experience (list). Then What We Offer (benefits list). Also there is EEO statement and legal stuff to remove.
We need to map to headings: About the role? Could combine About Valar Atomics and The Team? But headings are prescribed: About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule.
We need to decide which sections to include based on content.
- About the role: we have description of role (The Role). Could also include About Valar Atomics and The Team maybe as part of About the role? But heading is About the role, not About company. We could put role description there.
- Responsibilities: we have Key Responsibilities list.
- Requirements: could be Basic Qualifications (mandatory). Or Requirements could be basic qualifications.
- Qualifications: maybe Preferred Skills and Experience? But we already used Requirements for basic qualifications; Qualifications could be preferred? However the instruction says use headings exactly as given: About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule. We need to include sections only when posting has real specific content. We can decide to map:
About the role: role description (The Role) plus maybe team description.
Responsibilities: Key Responsibilities.
Requirements: Basic Qualifications.
Qualifications: Preferred Skills and Experience.
Skills: maybe we could combine with Qualifications? But we need a Skills section if there is specific skill content. The posting includes "Proficiency in power system analysis software...", "Working knowledge of IEEE..." etc. Those are in Basic Qualifications. Also Preferred Skills includes EIT, nuclear facility experience, etc. Could put those under Skills.
Benefits: What We Offer list.
Pay: not specified (no salary number). So we should NOT include Pay section.
Schedule: not specified. So omit.
Thus we will output sections: About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits.
We need to use
for section headings like About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule. We must not repeat job title as heading. We need to include sections only when posting has real specific content.
We have content: About Valar Atomics (company description). The Team (team description). The Role (role description). Then Key Responsibilities (list). Then Basic Qualifications (list). Then Preferred Skills and Experience (list). Then What We Offer (benefits list). Also there is EEO statement and legal stuff to remove.
We need to map to headings: About the role? Could combine About Valar Atomics and The Team? But headings are prescribed: About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule.
We need to decide which sections to include based on content.
- About the role: we have description of role (The Role). Could also include About Valar Atomics and The Team maybe as part of About the role? But heading is About the role, not About company. We could put role description there.
- Responsibilities: we have Key Responsibilities list.
- Requirements: could be Basic Qualifications (mandatory). Or Requirements could be basic qualifications.
- Qualifications: maybe Preferred Skills and Experience? But we already used Requirements for basic qualifications; Qualifications could be preferred? However the instruction says use headings exactly as given: About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule. We need to include sections only when posting has real specific content. We can decide to map:
About the role: role description (The Role) plus maybe team description.
Responsibilities: Key Responsibilities.
Requirements: Basic Qualifications.
Qualifications: Preferred Skills and Experience.
Skills: maybe we could combine with Qualifications? But we need a Skills section if there is specific skill content. The posting includes "Proficiency in power system analysis software...", "Working knowledge of IEEE..." etc. Those are in Basic Qualifications. Also Preferred Skills includes EIT, nuclear facility experience, etc. Could put those under Skills.
Benefits: What We Offer list.
Pay: not specified (no salary number). So we should NOT include Pay section.
Schedule: not specified. So omit.
Thus we will output sections: About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits.
We need to use for each heading. Then content:
for prose,
- for lists.
We must preserve all substantive information, not invent or summarize away detail. So we need to include all details from the sections.
Let's extract content.
About Valar Atomics paragraph: "At Valar Atomics, we're redefining what's possible in energy. Our mission is to make clean, high-temperature nuclear power scalable, unlocking abundant energy for industry, hydrogen, and next-generation manufacturing. We are a team of builders, engineers, and operators who believe nuclear energy should be fast to deploy, factory-made, and built for the real world. Our first pilot plant in Orangeville, Utah will demonstrate how advanced nuclear systems and fuel fabrication can power the future. Joining Valar Atomics means becoming part of a company where autonomy, ownership, and impact exist at every level."
The Team paragraph: "You will be joining Valar Atomics' IC&E Engineering team, embedded within the broader Fuel Manufacturing engineering group. The team delivers the electrical infrastructure that powers Valar's fuel manufacturing facilities from utility interconnection through MV distribution, process area LV systems, and emergency power. You will work alongside I&C, mechanical, and nuclear safety engineers in a collaborative environment that demands technical precision and a strong safety culture, with the opportunity to contribute to some of the most technically interesting power distribution challenges in the advanced nuclear sector."
The Role paragraph: "Valar Atomics is seeking a mid-level Electrical Engineer to support the design and engineering of medium voltage (MV) and low voltage (LV) electrical systems for nuclear fuel manufacturing and process industry facilities. The role spans the full electrical discipline scope from power system studies through equipment specification, protection design, and commissioning support."
We could combine these three paragraphs under About the role heading.
Now Responsibilities: list of items after "Key Responsibilities". Let's capture each bullet.
- Develop and maintain electrical load lists; perform power system studies including load flow, short circuit (ANSI/IEC), voltage drop, motor starting, and harmonic analysis using SKM Power Tools, ETAP, or equivalent.
- Prepare arc flash hazard analysis to IEEE 1584; develop substation grounding calculations to IEEE 80; size transformers, cables, switchgear buses, capacitor banks, and UPS/battery systems.
- Develop single line diagrams for MV and LV distribution systems from utility interface through to MCCs and final distribution boards; prepare equipment arrangement and layout drawings, cable schedules, tray routing, and underground duct bank designs.
- Specify MV switchgear, LV switchboards, MCCs, distribution panelboards, transformers, bus ducts, VFDs, UPS systems, and standby generator packages; prepare electrical area classification drawings and specify hazardous area equipment to NEC/CEC 500 or IEC 60079 series.
- Prepare protection relay settings studies and time-current coordination plots for MV systems; specify protection relays and metering equipment; develop relay panel arrangement drawings, DC control schematics, and MCC control wiring diagrams.
- Prepare technical specifications and data sheets for electrical equipment; evaluate vendor bids; review vendor drawings, type test reports, and quality plans; witness factory acceptance tests.
- Lead vendor pre-qualification, technical bid evaluation, and award recommendation for major electrical packages; manage vendor document review cycles; lead factory audits for safety-related or nuclear-classified equipment.
- Prepare electrical installation specifications; support pre-commissioning activities including insulation testing, continuity checks, relay secondary injection, and equipment energization; respond to site technical queries.
- Coordinate with I&C engineers on motor and drive control interfaces; coordinate with civil and structural disciplines on substation layout and cable penetration requirements.
- Mentor and develop junior electrical engineers; represent the electrical discipline at design reviews, HAZOP studies, AHJ meetings, and regulatory interactions; direct contractors and consultants on electrical scope including work assignment, technical review, and deliverable oversight.
Now Requirements (Basic Qualifications):
- Bachelor's degree in Electrical Engineering or a closely related discipline.
- 5+ years of electrical engineering experience in process, industrial, or power projects focused on MV/LV distribution system design.
- Proficiency in power system analysis software (SKM Power Tools, ETAP, or equivalent) with demonstrated experience in load flow, short circuit, and protection coordination studies.
- Experience preparing arc flash studies to IEEE 1584.
- Working knowledge of IEEE, NEMA, ANSI, CSA C22.1, and IEC 60364 electrical standards.
- Proficiency with AutoCAD or equivalent electrical design tools.
Now Qualifications (Preferred Skills and Experience):
- EIT designation or P.Eng. / P.E. registration (or equivalent), or active pursuit thereof.
- Experience with nuclear facility electrical design and nuclear classification requirements (IEEE 384, CSA N290.7).
- Familiarity with seismically qualified electrical equipment (IEEE 344).
- Experience with IEC 61850 substation automation and protection communication.
- Experience with DC systems and battery sizing (IEEE 485/1115).
- Experience with utility interconnection studies and PPA technical interface requirements.
Now Skills: maybe we could treat some of the technical skills as Skills section, but we already used Qualifications for preferred. However we have not used Skills heading yet. Could we put the technical proficiencies (power system analysis software, AutoCAD, standards) under Skills? But those are already in Requirements. Might be redundant. Better to follow the instruction: Use headings only when posting has real specific content. We have content for Skills? The posting includes "Proficiency in power system analysis software...", "Working knowledge of IEEE...", "Proficiency with AutoCAD...". Those could be considered Skills. But we already placed them under Requirements (basic qualifications). However we could move them to Skills and keep Requirements for degree and years experience. But the instruction says not to invent or summarize away detail; we can reorganize as long as we preserve all info. It's okay to shift categories as long as we keep all info. But we must not lose any detail.
We need to decide a mapping that makes sense and uses headings appropriately.
We have sections: About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits.
We could assign:
- About the role: company description, team description, role description.
- Responsibilities: list of responsibilities.
- Requirements: basic qualifications (degree, years experience).
- Qualifications: preferred skills and experience (EIT, nuclear, etc.)
- Skills: technical proficiencies (power system analysis software, arc flash, standards, AutoCAD).
- Benefits: What We Offer list.
Thus we avoid duplication and use all headings with real content.
Let's verify each section has content.
About the role: we have three paragraphs.
Responsibilities: list.
Requirements: Bachelor's degree, 5+ years experience.
Qualifications: EIT/P.Eng, nuclear facility experience, seismically qualified, IEC 61850, DC systems/battery sizing, utility interconnection studies.
Skills: Proficiency in power system analysis software (SKM Power Tools, ETAP, or equivalent) with demonstrated experience in load flow, short circuit, and protection coordination studies; Experience preparing arc flash studies to IEEE 1584; Working knowledge of IEEE, NEMA, ANSI, CSA C22.1, and IEC 60364 electrical standards; Proficiency with AutoCAD or equivalent electrical design tools.
Benefits: list from What We Offer.
Check that we haven't missed any details: The responsibilities list includes all items. The qualifications list includes all preferred items. The skills list includes all technical proficiencies from basic qualifications besides degree and years experience. Good.
Now we need to output HTML fragment only, no /, no markdown.
We'll produce:
About the role
... combined paragraphs ...
Responsibilities
- ... ...
Requirements
- Bachelor's degree in Electrical Engineering or a closely related discipline.
- 5+ years of electrical engineering experience in process, industrial, or power projects focused on MV/LV distribution system design.
Qualifications
- EIT designation or P.Eng. / P.E. registration (or equivalent), or active pursuit thereof.
- Experience with nuclear facility electrical design and nuclear classification requirements (IEEE 384, CSA N290.7).
- Familiarity with seismically qualified electrical equipment (IEEE 344).
- Experience with IEC 61850 substation automation and protection communication.
- Experience with DC systems and battery sizing (IEEE 485/1115).
- Experience with utility interconnection studies and PPA technical interface requirements.
Skills
- Proficiency in power system analysis software (SKM Power Tools, ETAP, or equivalent) with demonstrated experience in load flow, short circuit, and protection coordination studies.
- Experience preparing arc flash studies to IEEE 1584.
- Working knowledge of IEEE, NEMA, ANSI, CSA C22.1, and IEC 60364 electrical standards.
- Proficiency with AutoCAD or equivalent electrical design tools.
Benefits
- Competitive base salary
- Equity ownership in a rapidly