Senior Electrical Engineer
McDermott International, Ltd · Houston, TX · 3 wk ago
Engineering$300/hrFull-time
We need to output HTML fragment with sections: About the role? Actually we have job description content. We need to use for section headings like About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule. We must include sections only when posting has real specific content. We need to parse the posting.
Job Title: Senior Electrical Engineer (not to be repeated as heading). Work location etc.
Job Summary: description of duties.
We need to extract responsibilities, requirements, qualifications, skills, benefits, pay, schedule.
Let's parse.
Job Summary: "Perform electrical engineering work on power, oil and gas and petrochemical projects. Produce drawings and associated Bills of Material, develop specifications, purchase equipment and develop necessary supporting reports, calculations and studies to verify electrical effort on the project. Act as Engineer of Record for the Electrical Discipline, utilizing thorough knowledge of one-line development, relay coordination, lighting calculations, cable sizing, short circuit analysis, grounding, communications, power and control. Apply Canadian Codes to electrical engineering work, including ensuring local compliance. Travel to manufacturing facilities and job sites to verify equipment configuration and compliance with specifications and other activities involved in the start-up of a plant. Supervise and coordinate engineers, designers and drafters assigned to project. Act as Marine Lead for Electrical discipline. Perform complex grounding and lightning protection calculations. Review and approve Lighting Calculations. Review and approve Panel Schedules, Main Electrical and Instrumentation Vendor coordination and document review. Design and review onshore/offshore umbilical systems. Maintain Electrical field Safety Representative (FSR-A) status for Canadian projects."
That's responsibilities.
Minimum Requirements: "Bachelor’s degree in Electrical Engineering or related field plus 10 years of experience in a related occupation. Position requires 8 years of industry experience with an Engineering, Procurement, and Construction (EPC) Contractor. Position also requires experience in each of the following: LNG, gas processing, refinery, or petrochemical projects; on-site experience during construction; Service as a Task Lead (I.e., Substitution Lead or Area Lead) on at least one (1) mid to large-size project in excess of $300 Million; Smart Plant Electrical (SPEL), ETAP, and MS Office Suite; Onshore/offshore Umbilical System Design; experience ensuring compliance of electrical systems on vessels according to Lloyd's Register, Bureau Veritas (BV), and American Bureau of Shipping (ABS) classification; and experience using CDEGS software for complex electrical grounding and lightning protection calculations. Position also requires registration as a Canadian Professional Engineer (P.Eng) for any Canadian-based projects."
That's qualifications/requirements.
Travel Requirements: "Up to 10% domestic and international travel required." That's schedule? Actually travel is schedule? Could be schedule section. But schedule maybe not present. Travel could be considered schedule? The instruction: include Pay/Schedule/Benefits sections only if posting actually states them. Travel is not pay, schedule, benefits. Could be schedule? Not exactly. Probably we can put Travel under Schedule? But schedule usually refers to work schedule (full-time, part-time, shift). Travel is not schedule. So we may not include schedule.
About Us: description of company. Could be "About the role"? Actually "About Us" is company description. Could be placed under "About the role"? The instruction: use
for section headings like About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule. We must include sections only when posting has real specific content. We need to parse the posting.
Job Title: Senior Electrical Engineer (not to be repeated as heading). Work location etc.
Job Summary: description of duties.
We need to extract responsibilities, requirements, qualifications, skills, benefits, pay, schedule.
Let's parse.
Job Summary: "Perform electrical engineering work on power, oil and gas and petrochemical projects. Produce drawings and associated Bills of Material, develop specifications, purchase equipment and develop necessary supporting reports, calculations and studies to verify electrical effort on the project. Act as Engineer of Record for the Electrical Discipline, utilizing thorough knowledge of one-line development, relay coordination, lighting calculations, cable sizing, short circuit analysis, grounding, communications, power and control. Apply Canadian Codes to electrical engineering work, including ensuring local compliance. Travel to manufacturing facilities and job sites to verify equipment configuration and compliance with specifications and other activities involved in the start-up of a plant. Supervise and coordinate engineers, designers and drafters assigned to project. Act as Marine Lead for Electrical discipline. Perform complex grounding and lightning protection calculations. Review and approve Lighting Calculations. Review and approve Panel Schedules, Main Electrical and Instrumentation Vendor coordination and document review. Design and review onshore/offshore umbilical systems. Maintain Electrical field Safety Representative (FSR-A) status for Canadian projects."
That's responsibilities.
Minimum Requirements: "Bachelor’s degree in Electrical Engineering or related field plus 10 years of experience in a related occupation. Position requires 8 years of industry experience with an Engineering, Procurement, and Construction (EPC) Contractor. Position also requires experience in each of the following: LNG, gas processing, refinery, or petrochemical projects; on-site experience during construction; Service as a Task Lead (I.e., Substitution Lead or Area Lead) on at least one (1) mid to large-size project in excess of $300 Million; Smart Plant Electrical (SPEL), ETAP, and MS Office Suite; Onshore/offshore Umbilical System Design; experience ensuring compliance of electrical systems on vessels according to Lloyd's Register, Bureau Veritas (BV), and American Bureau of Shipping (ABS) classification; and experience using CDEGS software for complex electrical grounding and lightning protection calculations. Position also requires registration as a Canadian Professional Engineer (P.Eng) for any Canadian-based projects."
That's qualifications/requirements.
Travel Requirements: "Up to 10% domestic and international travel required." That's schedule? Actually travel is schedule? Could be schedule section. But schedule maybe not present. Travel could be considered schedule? The instruction: include Pay/Schedule/Benefits sections only if posting actually states them. Travel is not pay, schedule, benefits. Could be schedule? Not exactly. Probably we can put Travel under Schedule? But schedule usually refers to work schedule (full-time, part-time, shift). Travel is not schedule. So we may not include schedule.
About Us: description of company. Could be "About the role"? Actually "About Us" is company description. Could be placed under "About the role"? The instruction: use for section headings (e.g. About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule). So we can have "About the role" containing job summary? Or we could have "About the role" as a short description. But we already have job summary. Could treat "About the role" as the job summary paragraph.
Responsibilities: list of duties.
Requirements: maybe combine minimum requirements and qualifications? The instruction separate Requirements and Qualifications. We could put "Requirements" for minimum requirements (education, years experience) and "Qualifications" for specific experiences/skills. Or we could combine. But better to follow typical: Requirements = education + years experience; Qualifications = specific experience, software, certifications.
Skills: maybe list software/tools: SPEL, ETAP, MS Office Suite, CDEGS, etc. Also knowledge of codes, etc.
Benefits: not mentioned.
Pay: not mentioned.
Schedule: not mentioned (travel not schedule). So we omit Pay, Schedule, Benefits.
We need to ensure we don't create empty sections.
Thus sections: About the role (job summary), Responsibilities (detailed duties), Requirements (education + years experience), Qualifications (specific experience, software, certifications), Skills (maybe list of technical skills). Could also include Travel under "Schedule"? But better to omit.
We must preserve all substantive information. So we need to include travel requirement somewhere. If we omit schedule, we lose travel info. Could we put travel under "About the role" or "Responsibilities"? Travel is a requirement/duty. Could include as a bullet under Responsibilities: "Travel to manufacturing facilities and job sites...". Already present in responsibilities. Travel requirement "Up to 10% domestic and international travel required." Could be added as a bullet under Responsibilities or maybe under Requirements. Since it's a requirement, we could add to Requirements. But we already have education+years. Could add travel as a bullet under Requirements.
Thus Requirements: Bachelor’s degree in Electrical Engineering or related field plus 10 years of experience in a related occupation; Position requires 8 years of industry experience with an EPC Contractor; Up to 10% domestic and international travel required.
Qualifications: experience in LNG, gas processing, refinery, or petrochemical projects; on-site experience during construction; Service as a Task Lead on at least one mid to large-size project >$300M; Smart Plant Electrical (SPEL), ETAP, and MS Office Suite; Onshore/offshore Umbilical System Design; experience ensuring compliance of electrical systems on vessels according to Lloyd's Register, BV, ABS; experience using CDEGS software for complex electrical grounding and lightning protection calculations; registration as a Canadian Professional Engineer (P.Eng) for any Canadian-based projects.
Skills: maybe list of technical skills: one-line development, relay coordination, lighting calculations, cable sizing, short circuit analysis, grounding, communications, power and control; Canadian Codes; etc. But many overlap with qualifications. Could keep skills separate: maybe list of software/tools: SPEL, ETAP, MS Office Suite, CDEGS. Also knowledge of classification societies. But we already have them in qualifications. To avoid duplication, we could keep qualifications as experience and certifications, and skills as technical abilities: one-line development, relay coordination, lighting calculations, cable sizing, short circuit analysis, grounding, communications, power and control; applying Canadian Codes; etc.
But we must preserve all info; duplication is okay as long as we don't invent or summarize away detail. Duplication is allowed? The instruction: "Preserve ALL substantive information; do NOT invent or summarize away detail." Duplication is not summarizing away; it's okay but could be redundant. Better to avoid duplication but not required. We'll try to split logically.
Let's craft HTML:
About the role
About the role
Perform electrical engineering work on power, oil and gas and petrochemical projects. Produce drawings and associated Bills of Material, develop specifications, purchase equipment and develop necessary supporting reports, calculations and studies to verify electrical effort on the project. Act as Engineer of Record for the Electrical Discipline, utilizing thorough knowledge of one-line development, relay coordination, lighting calculations, cable sizing, short circuit analysis, grounding, communications, power and control. Apply Canadian Codes to electrical engineering work, including ensuring local compliance. Travel to manufacturing facilities and job sites to verify equipment configuration and compliance with specifications and other activities involved in the start-up of a plant. Supervise and coordinate engineers, designers and drafters assigned to project. Act as Marine Lead for Electrical discipline. Perform complex grounding and lightning protection calculations. Review and approve Lighting Calculations. Review and approve Panel Schedules, Main Electrical and Instrumentation Vendor coordination and document review. Design and review onshore/offshore umbilical systems. Maintain Electrical field Safety Representative (FSR-A) status for Canadian projects.
But note we omitted some phrasing: "to verify electrical effort on the project." We'll keep. Now Responsibilities: maybe we can list bullet points from job summary that are duties. But we already have a paragraph. Could split into- . The instruction: Use
- for any list of duties/requirements/benefits. So we should convert duties into list. So we need to create a list for responsibilities. Similarly for requirements and qualifications.
Thus:
Responsibilities
- Perform electrical engineering work on power, oil and gas and petrochemical projects.
- Produce drawings and associated Bills of Material, develop specifications, purchase equipment and develop necessary supporting reports, calculations and studies to verify electrical effort on the project.
- Act as Engineer of Record for the Electrical Discipline, utilizing thorough knowledge of one-line development, relay coordination, lighting calculations, cable sizing, short circuit analysis, grounding, communications, power and control.
- Apply Canadian Codes to electrical engineering work, including ensuring local compliance.
- Travel to manufacturing facilities and job sites to verify equipment configuration and compliance with specifications and other activities involved in the start-up of a plant.
- Supervise and coordinate engineers, designers and drafters assigned to project.
- Act as Marine Lead for Electrical discipline.
- Perform complex grounding and lightning protection calculations.
- Review and approve Lighting Calculations.
- Review and approve Panel Schedules, Main Electrical and Instrumentation Vendor coordination and document review.
- Design and review onshore/offshore umbilical systems.
- Maintain Electrical field Safety Representative (FSR-A) status for Canadian projects.
Requirements
- Bachelor’s degree in Electrical Engineering or related field plus 10 years of experience in a related occupation.
- Position requires 8 years of industry experience with an Engineering, Procurement, and Construction (EPC) Contractor.
- Up to 10% domestic and international travel required.
Qualifications
- Experience in LNG, gas processing, refinery, or petrochemical projects.
- On-site experience during construction.
- Service as a Task Lead (e.g., Substitution Lead or Area Lead) on at least one mid to large-size project in excess of $300 Million.
- Experience with Smart Plant Electrical (SPEL), ETAP, and MS Office Suite.
- Onshore/offshore Umbilical System Design experience.
- Experience ensuring compliance of electrical systems on vessels according to Lloyd's Register, Bureau Veritas (BV), and American Bureau of Shipping (ABS) classification.
- Experience using CDEGS software for complex electrical grounding and lightning protection calculations.
- Registration as a Canadian Professional Engineer (P.Eng) for any Canadian-based projects.
Skills
- One-line development
- Relay coordination
- Lighting calculations
- Cable sizing
- Short circuit analysis
- Grounding
- Communications
- Power and control systems
- Application of Canadian Codes
- for any list of duties/requirements/benefits. So we should convert duties into list. So we need to create a list for responsibilities. Similarly for requirements and qualifications.
Thus: