Safety Coordinator
for section headings. Use - for any list of duties/requirements/benefits. Use
for prose.
We need to preserve all substantive information, remove boilerplate, duplicated lines, etc. Also remove navigation/legal/EEO etc. The input includes repeated sections and some weird markup like "Overview 48_Advise Created with Sketch." etc. We need to extract meaningful content.
Let's parse the content:
First part:
Overview 48_Advise Created with Sketch. Position Summary The Site Services Installation Safety Coordinator is responsible for implementing and enforcing the Company’s safety program and applicable subcontractor safety requirements under the direction of the Environmental Health and Safety (EHS) Manager, Site Supervisor, and in coordination with the General Contractor (GC).
48_Compensation Created with Sketch. Benefits Life Insurance. Short-Term Disability (STD). Long-Term Disability (LTD). 3 Weeks Paid Time Off (PTO). 7 Paid Holidays in 2026. Paid Parental Leave.
48_Management Created with Sketch. Management Conduct daily safety inspections of work areas, equipment, and operations. Identify, correct, and document hazards related to fall protection, elevated work, material handling, rigging, scissor lifts, aerial work platforms, forklifts, and telehandlers. Immediately address unsafe conditions involving personnel or equipment. Coordinate hazard mitigation with the EHS Manager and GC safety team when issues impact other trades or shared spaces.
48_Performance Created with Sketch. Performance Enforce compliance with OSHA 29 CFR 1926, company safety policies, and GC Site Specific Safety Plans. Support implementation of subcontractor safety programs and GC safety requirements. Participate in incident, injury, and near miss investigations and ensure timely reporting. Assist with Job Hazard Analyses and Activity Hazard Analyses Support emergency response procedures as directed. Conduct or assist with safety orientations, task specific briefings, and toolbox talks.
Requirements 48_Degree Created with Sketch. Education High school diploma or GED required; technical or vocational training preferred. OSHA 30 Hour Construction certification required.
48_Experience Created with Sketch. Experience Two to five years of construction safety experience, preferably in a subcontractor environment. Experience in Microsoft Office and construction-related tracking and reporting software.
48_Knowledge Created with Sketch. Skills Demonstrated competency in hazard recognition within the Company’s scope of work. Understanding of GC controlled jobsite safety coordination. Strong communication and collaboration skills. Ability to professionally enforce safety requirements in the field.
48_Safety Created with Sketch. Safety Comply with OSHA regulations and company safety policies and procedures. Report unsafe conditions promptly. Attend required safety training. Support safety goals and recommend improvements. Follow safe work practices, including ergonomics, PPE use, and lockout procedures.
48_License Created with Sketch. License Valid driver’s license with ability to pass initial and annual DMV review.
Then there is a block: Overview 999 && !hideOverview" dot-dot-dot="" ng-bind-html="section.description | rawHtml" style="overflow-wrap: break-word;"> Why Join Us?Company-Paid BenefitsLife InsuranceShort-Term Disability (STD)Long-Term Disability (LTD)3 Weeks Paid Time Off (PTO)7 Paid Holidays in 2026Paid Parental LeaveAdditional Benefits401(k) with Company MatchMedical, Dental, and Vision InsuranceEmployee Discount ProgramsOptional Supplemental BenefitsCareer Development and Tuition AssistanceDiverse, Inclusive, and Welcoming CultureJob Summary: The Site Services Installation Safety Coordinator is responsible for implementing and enforcing the Company’s safety program and applicable subcontractor safety requirements under the direction of the Environmental Health and Safety (EHS) Manager, Site Supervisor, and in coordination with the General Contractor (GC). This role ensures that Subzero Engineering employees and lower tier subcontractors perform work safely and in compliance with OSHA, company policies, and site-specific safety plans.The Safety Coordinator identifies, corrects, documents, and communicates jobsite hazards within the Company’s scope of work and coordinates corrective actions with the EHS Manager and GC when hazards affect other trades or shared work areas. Why Join Us? Company-Paid Benefits Life Insurance Short-Term Disability (STD) Long-Term Disability (LTD) 3 Weeks Paid Time Off (PTO) 7 Paid Holidays in 2026 Paid Parental Leave Additional Benefits 401(k) with Company Match Medical, Dental, and Vision Insurance Employee Discount Programs Optional Supplemental Benefits Career Development and Tuition Assistance Diverse, Inclusive, and Welcoming Culture Job Summary: The Site Services Installation Safety Coordinator is responsible for implementing and enforcing the Company’s safety program and applicable subcontractor safety requirements under the direction of the Environmental Health and Safety (EHS) Manager, Site Supervisor, and in coordination with the General Contractor (GC). This role ensures that Subzero Engineering employees and lower tier subcontractors perform work safely and in compliance with OSHA, company policies, and site-specific safety plans.The Safety Coordinator identifies, corrects, documents, and communicates jobsite hazards within the Company’s scope of work and coordinates corrective actions with the EHS Manager and GC when hazards affect other trades or shared work areas. Responsibilities 999 && !hideOverview" dot-dot-dot="" ng-bind-html="section.description | rawHtml" style="overflow-wrap: break-word;"> Conduct daily safety inspections of work areas, equipment, and operationsIdentify, correct, and document hazards related to fall protection, elevated work, material handling, rigging, scissor lifts, aerial work platforms, forklifts, and telehandlersImmediately address unsafe conditions involving personnel or equipmentCoordinate hazard mitigation with the EHS Manager and GC safety team when issues impact other trades or shared spacesEnforce compliance with OSHA 29 CFR 1926, company safety policies, and GC Site Specific Safety PlansSupport implementation of subcontractor safety programs and GC safety requirementsParticipate in incident, injury, and near miss investigations and ensure timely reportingAssist with Job Hazard Analyses and Activity Hazard AnalysesSupport emergency response procedures as directedConduct or assist with safety orientations, task specific briefings, and toolbox talksVerify required training, certifications, and operator qualificationsMaintain inspection reports, training records, incident documentation, and corrective action trackingMaintain regular and reliable attendancePerform other duties as assignedConduct daily safety inspections of work areas, equipment, and operationsIdentify, correct, and document hazards related to fall protection, elevated work, material handling, rigging, scissor lifts, aerial work platforms, forklifts, and telehandlersImmediately address unsafe conditions involving personnel or equipmentCoordinate hazard mitigation with the EHS Manager and GC safety team when issues impact other trades or shared spacesEnforce compliance with OSHA 29 CFR 1926, company safety policies, and GC Site Specific Safety PlansSupport implementation of subcontractor safety programs and GC safety requirementsParticipate in incident, injury, and near miss investigations and ensure timely reportingAssist with Job Hazard Analyses and Activity Hazard AnalysesSupport emergency response procedures as directedConduct or assist with safety orientations, task specific briefings, and toolbox talksVerify required training, certifications, and operator qualificationsMaintain inspection reports, training records, incident documentation, and corrective action trackingMaintain regular and reliable attendancePerform other duties as assigned Requirements 999 && !hideOverview" dot-dot-dot="" ng-bind-html="section.description | rawHtml" style="overflow-wrap: break-word;"> Authority Authorized to stop work when unsafe conditions or behaviors are observedAuthorized to require corrective actions prior to work resumingEscalate unresolved or site wide hazards to the GC safety management team immediately Safety Requirements Comply with OSHA regulations and company safety policies and proceduresReport unsafe conditions promptlyAttend required safety trainingSupport safety goals and recommend improvementsFollow safe work practices, including ergonomics, PPE use, and lockout procedures Minimum Requirements High school diploma or GED required; technical or vocational training preferredTwo to five years of construction safety experience, preferably in a subcontractor environmentOSHA 30 Hour Construction certification requiredOSHA 510 or 511, or equivalent training, preferredDemonstrated competency in hazard recognition within the Company’s scope of workUnderstanding of GC controlled jobsite safety coordinationStrong communication and collaboration skillsAbility to professionally enforce safety requirements in the fieldValid driver’s license with ability to pass initial and annual DMV reviewExperience in Microsoft Office and construction-related tracking and reporting software. Physical Requirements Must be able to perform the following functions with or without reasonable accommodation:Ability to sit, stand, and walk for extended periodsAbility to lift, push, and pull up to 50 poundsAbility to work at heights, in confined spaces, and on active construction sitesExposure to noise, temperature fluctuations, moving equipment, and environmental irritantsAbility to kneel, crawl, twist, reach, and use hands and fingers without restriction Authority Authorized to stop work when unsafe conditions or behaviors are observedAuthorized to require corrective actions prior to work resumingEscalate unresolved or site wide hazards to the GC safety management team immediately Safety Requirements Comply with OSHA regulations and company safety policies and proceduresReport unsafe conditions promptlyAttend required safety trainingSupport safety goals and recommend improvementsFollow safe work practices, including ergonomics, PPE use, and lockout procedures Minimum Requirements High school diploma or GED required; technical or vocational training preferredTwo to five years of construction safety experience, preferably in a subcontractor environmentOSHA 30 Hour Construction certification requiredOSHA 510 or 511, or equivalent training, preferredDemonstrated competency in hazard recognition within the Company’s scope of workUnderstanding of GC controlled jobsite safety coordinationStrong communication and collaboration skillsAbility to professionally enforce safety requirements in the fieldValid driver’s license with ability to pass initial and annual DMV reviewExperience in Microsoft Office and construction-related tracking and reporting software. Physical Requirements Must be able to perform the following functions with or without reasonable accommodation:Ability to sit, stand, and walk for extended periodsAbility to lift, push, and pull up to 50 poundsAbility to work at heights, in confined spaces, and on active construction sitesExposure to noise, temperature fluctuations, moving equipment, and environmental irritantsAbility to kneel, crawl, twist, reach, and use hands and fingers without restriction
We need to consolidate unique info.
Key sections:
- Position Summary / Overview: The Site Services Installation Safety Coordinator is responsible for implementing and enforcing the Company’s safety program and applicable subcontractor safety requirements under the direction of the Environmental Health and Safety (EHS) Manager, Site Supervisor, and in coordination with the General Contractor (GC). This role ensures that Subzero Engineering employees and lower tier subcontractors perform work safely and in compliance with OSHA, company policies, and site-specific safety plans. The Safety Coordinator identifies, corrects, documents, and communicates jobsite hazards within the Company’s scope of work and coordinates corrective actions with the EHS Manager and GC when hazards affect other trades or shared work areas.
We could put that under a heading like "About the role" or "Position Summary". The instruction says use
for section headings (e.g. About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule). So we can use "About the role" for overview.
- Benefits: Life Insurance, Short-Term Disability (STD), Long-Term Disability (LTD), 3 Weeks Paid Time Off (PTO), 7 Paid Holidays in 2026, Paid Parental Leave, Additional Benefits: 401(k) with Company Match, Medical, Dental, and Vision Insurance, Employee Discount Programs, Optional Supplemental Benefits, Career Development and Tuition Assistance, Diverse, Inclusive
for prose. We need to preserve all substantive information, remove boilerplate, duplicated lines, etc. Also remove navigation/legal/EEO etc. The input includes repeated sections and some weird markup like "Overview 48_Advise Created with Sketch." etc. We need to extract meaningful content. Let's parse the content: First part: Overview 48_Advise Created with Sketch. Position Summary The Site Services Installation Safety Coordinator is responsible for implementing and enforcing the Company’s safety program and applicable subcontractor safety requirements under the direction of the Environmental Health and Safety (EHS) Manager, Site Supervisor, and in coordination with the General Contractor (GC). 48_Compensation Created with Sketch. Benefits Life Insurance. Short-Term Disability (STD). Long-Term Disability (LTD). 3 Weeks Paid Time Off (PTO). 7 Paid Holidays in 2026. Paid Parental Leave. 48_Management Created with Sketch. Management Conduct daily safety inspections of work areas, equipment, and operations. Identify, correct, and document hazards related to fall protection, elevated work, material handling, rigging, scissor lifts, aerial work platforms, forklifts, and telehandlers. Immediately address unsafe conditions involving personnel or equipment. Coordinate hazard mitigation with the EHS Manager and GC safety team when issues impact other trades or shared spaces. 48_Performance Created with Sketch. Performance Enforce compliance with OSHA 29 CFR 1926, company safety policies, and GC Site Specific Safety Plans. Support implementation of subcontractor safety programs and GC safety requirements. Participate in incident, injury, and near miss investigations and ensure timely reporting. Assist with Job Hazard Analyses and Activity Hazard Analyses Support emergency response procedures as directed. Conduct or assist with safety orientations, task specific briefings, and toolbox talks. Requirements 48_Degree Created with Sketch. Education High school diploma or GED required; technical or vocational training preferred. OSHA 30 Hour Construction certification required. 48_Experience Created with Sketch. Experience Two to five years of construction safety experience, preferably in a subcontractor environment. Experience in Microsoft Office and construction-related tracking and reporting software. 48_Knowledge Created with Sketch. Skills Demonstrated competency in hazard recognition within the Company’s scope of work. Understanding of GC controlled jobsite safety coordination. Strong communication and collaboration skills. Ability to professionally enforce safety requirements in the field. 48_Safety Created with Sketch. Safety Comply with OSHA regulations and company safety policies and procedures. Report unsafe conditions promptly. Attend required safety training. Support safety goals and recommend improvements. Follow safe work practices, including ergonomics, PPE use, and lockout procedures. 48_License Created with Sketch. License Valid driver’s license with ability to pass initial and annual DMV review. Then there is a block: Overview 999 && !hideOverview" dot-dot-dot="" ng-bind-html="section.description | rawHtml" style="overflow-wrap: break-word;"> Why Join Us?Company-Paid BenefitsLife InsuranceShort-Term Disability (STD)Long-Term Disability (LTD)3 Weeks Paid Time Off (PTO)7 Paid Holidays in 2026Paid Parental LeaveAdditional Benefits401(k) with Company MatchMedical, Dental, and Vision InsuranceEmployee Discount ProgramsOptional Supplemental BenefitsCareer Development and Tuition AssistanceDiverse, Inclusive, and Welcoming CultureJob Summary: The Site Services Installation Safety Coordinator is responsible for implementing and enforcing the Company’s safety program and applicable subcontractor safety requirements under the direction of the Environmental Health and Safety (EHS) Manager, Site Supervisor, and in coordination with the General Contractor (GC). This role ensures that Subzero Engineering employees and lower tier subcontractors perform work safely and in compliance with OSHA, company policies, and site-specific safety plans.The Safety Coordinator identifies, corrects, documents, and communicates jobsite hazards within the Company’s scope of work and coordinates corrective actions with the EHS Manager and GC when hazards affect other trades or shared work areas. Why Join Us? Company-Paid Benefits Life Insurance Short-Term Disability (STD) Long-Term Disability (LTD) 3 Weeks Paid Time Off (PTO) 7 Paid Holidays in 2026 Paid Parental Leave Additional Benefits 401(k) with Company Match Medical, Dental, and Vision Insurance Employee Discount Programs Optional Supplemental Benefits Career Development and Tuition Assistance Diverse, Inclusive, and Welcoming Culture Job Summary: The Site Services Installation Safety Coordinator is responsible for implementing and enforcing the Company’s safety program and applicable subcontractor safety requirements under the direction of the Environmental Health and Safety (EHS) Manager, Site Supervisor, and in coordination with the General Contractor (GC). This role ensures that Subzero Engineering employees and lower tier subcontractors perform work safely and in compliance with OSHA, company policies, and site-specific safety plans.The Safety Coordinator identifies, corrects, documents, and communicates jobsite hazards within the Company’s scope of work and coordinates corrective actions with the EHS Manager and GC when hazards affect other trades or shared work areas. Responsibilities 999 && !hideOverview" dot-dot-dot="" ng-bind-html="section.description | rawHtml" style="overflow-wrap: break-word;"> Conduct daily safety inspections of work areas, equipment, and operationsIdentify, correct, and document hazards related to fall protection, elevated work, material handling, rigging, scissor lifts, aerial work platforms, forklifts, and telehandlersImmediately address unsafe conditions involving personnel or equipmentCoordinate hazard mitigation with the EHS Manager and GC safety team when issues impact other trades or shared spacesEnforce compliance with OSHA 29 CFR 1926, company safety policies, and GC Site Specific Safety PlansSupport implementation of subcontractor safety programs and GC safety requirementsParticipate in incident, injury, and near miss investigations and ensure timely reportingAssist with Job Hazard Analyses and Activity Hazard AnalysesSupport emergency response procedures as directedConduct or assist with safety orientations, task specific briefings, and toolbox talksVerify required training, certifications, and operator qualificationsMaintain inspection reports, training records, incident documentation, and corrective action trackingMaintain regular and reliable attendancePerform other duties as assignedConduct daily safety inspections of work areas, equipment, and operationsIdentify, correct, and document hazards related to fall protection, elevated work, material handling, rigging, scissor lifts, aerial work platforms, forklifts, and telehandlersImmediately address unsafe conditions involving personnel or equipmentCoordinate hazard mitigation with the EHS Manager and GC safety team when issues impact other trades or shared spacesEnforce compliance with OSHA 29 CFR 1926, company safety policies, and GC Site Specific Safety PlansSupport implementation of subcontractor safety programs and GC safety requirementsParticipate in incident, injury, and near miss investigations and ensure timely reportingAssist with Job Hazard Analyses and Activity Hazard AnalysesSupport emergency response procedures as directedConduct or assist with safety orientations, task specific briefings, and toolbox talksVerify required training, certifications, and operator qualificationsMaintain inspection reports, training records, incident documentation, and corrective action trackingMaintain regular and reliable attendancePerform other duties as assigned Requirements 999 && !hideOverview" dot-dot-dot="" ng-bind-html="section.description | rawHtml" style="overflow-wrap: break-word;"> Authority Authorized to stop work when unsafe conditions or behaviors are observedAuthorized to require corrective actions prior to work resumingEscalate unresolved or site wide hazards to the GC safety management team immediately Safety Requirements Comply with OSHA regulations and company safety policies and proceduresReport unsafe conditions promptlyAttend required safety trainingSupport safety goals and recommend improvementsFollow safe work practices, including ergonomics, PPE use, and lockout procedures Minimum Requirements High school diploma or GED required; technical or vocational training preferredTwo to five years of construction safety experience, preferably in a subcontractor environmentOSHA 30 Hour Construction certification requiredOSHA 510 or 511, or equivalent training, preferredDemonstrated competency in hazard recognition within the Company’s scope of workUnderstanding of GC controlled jobsite safety coordinationStrong communication and collaboration skillsAbility to professionally enforce safety requirements in the fieldValid driver’s license with ability to pass initial and annual DMV reviewExperience in Microsoft Office and construction-related tracking and reporting software. Physical Requirements Must be able to perform the following functions with or without reasonable accommodation:Ability to sit, stand, and walk for extended periodsAbility to lift, push, and pull up to 50 poundsAbility to work at heights, in confined spaces, and on active construction sitesExposure to noise, temperature fluctuations, moving equipment, and environmental irritantsAbility to kneel, crawl, twist, reach, and use hands and fingers without restriction Authority Authorized to stop work when unsafe conditions or behaviors are observedAuthorized to require corrective actions prior to work resumingEscalate unresolved or site wide hazards to the GC safety management team immediately Safety Requirements Comply with OSHA regulations and company safety policies and proceduresReport unsafe conditions promptlyAttend required safety trainingSupport safety goals and recommend improvementsFollow safe work practices, including ergonomics, PPE use, and lockout procedures Minimum Requirements High school diploma or GED required; technical or vocational training preferredTwo to five years of construction safety experience, preferably in a subcontractor environmentOSHA 30 Hour Construction certification requiredOSHA 510 or 511, or equivalent training, preferredDemonstrated competency in hazard recognition within the Company’s scope of workUnderstanding of GC controlled jobsite safety coordinationStrong communication and collaboration skillsAbility to professionally enforce safety requirements in the fieldValid driver’s license with ability to pass initial and annual DMV reviewExperience in Microsoft Office and construction-related tracking and reporting software. Physical Requirements Must be able to perform the following functions with or without reasonable accommodation:Ability to sit, stand, and walk for extended periodsAbility to lift, push, and pull up to 50 poundsAbility to work at heights, in confined spaces, and on active construction sitesExposure to noise, temperature fluctuations, moving equipment, and environmental irritantsAbility to kneel, crawl, twist, reach, and use hands and fingers without restriction We need to consolidate unique info. Key sections: - Position Summary / Overview: The Site Services Installation Safety Coordinator is responsible for implementing and enforcing the Company’s safety program and applicable subcontractor safety requirements under the direction of the Environmental Health and Safety (EHS) Manager, Site Supervisor, and in coordination with the General Contractor (GC). This role ensures that Subzero Engineering employees and lower tier subcontractors perform work safely and in compliance with OSHA, company policies, and site-specific safety plans. The Safety Coordinator identifies, corrects, documents, and communicates jobsite hazards within the Company’s scope of work and coordinates corrective actions with the EHS Manager and GC when hazards affect other trades or shared work areas. We could put that under a heading like "About the role" or "Position Summary". The instruction says use