Quality Weld Inspector (5:00AM - 1:30PM) 1st Shift

We need to output HTML fragment with sections for headings where there is real content. Use

for section headings: About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule. We must not repeat job title. No Job ID. Remove boilerplate: cookie/navigation/legal/EEO/equal-opportunity/scam-warning boilerplate, duplicated lines, application instructions. Also remove the video link? Probably not needed; it's not essential. The "About G&W Electric" description maybe could go under About the role? Actually "About the role" is a heading; we can put description of role there. The "About G&W Electric" is company description; maybe not needed? It's substantive but not role-specific. Could include under About the role? Might be considered filler. The instruction: include a section ONLY when the posting has real, specific content for it. So we need to decide which sections have content. We have: - About the role: we have description: "We are looking to hire an enthusiastic and hardworking quality weld inspector..." plus details about role. So we can put that under About the role. - Responsibilities: we have many duties listed under Essential Duties And Responsibilities with subcategories. So we can put those under Responsibilities as a list. - Requirements: we have Education and Experience section (minimum high school diploma etc). That's requirements. Also maybe "Education and Experience:" repeated twice; we need to combine. - Qualifications: maybe the preferred experience etc. Could be Qualifications. - Skills: Knowledge, Skills, Competencies section. - Benefits: we have "What We Offer You" includes Pay Range and benefits list. Pay is separate section; Benefits separate. - Pay: we have Pay Range $28.50 - $30.25 per hour. - Schedule: not mentioned; no schedule info, so we omit Schedule section. We must not create sections with filler like "commensurate with experience". Pay is specific. We need to preserve all substantive information; do not invent or summarize away detail. So we need to include all details from the posting, but we can format as lists. We must not repeat duplicated lines. There's duplicate "Education and Experience:" heading appears twice; we need to combine content. Also duplicate "G&W Electric participates in the E-Verify process for all new hires." appears twice; we should keep only once. Also duplicate lines like "We are looking to hire..." appears only once. We need to remove boilerplate: EEO statement, VEVRAA, etc. Also remove the video link? It's not boilerplate but maybe not essential; but it's part of company description. Might be considered substantive? It's a link to video; maybe we can keep under About G&W Electric but we don't have a section for company description. Could include under About the role? Might be considered extra. The instruction: "Preserve ALL substantive information; do NOT invent or summarize away detail." So we need to keep the video link? It's part of the posting. It's not boilerplate; it's a link to learn more about company. Might be considered substantive. However we don't have a section for company info; we could put it under About the role as a paragraph. But the instruction about sections: we can only emit sections when posting has real, specific content for it. So we could have About the role (includes role description and company info). That's okay. We must not include application instructions (like "apply now", etc). Not present. Now craft HTML. Structure:

About the role

We are looking to hire an enthusiastic and hardworking quality weld inspector with a good eye for detail and knowledge of weld materials, processes, technique, and overall weld integrity and quality. The Quality Inspector – Weld & Fabrication ensures welded and fabricated products meet engineering drawings, welding requirements, customer specifications, and quality standards. This role works primarily on the manufacturing floor, inspecting parts at key stages of production to identify and contain quality issues early. The inspector works closely with Welders, Team Leaders, Supervisors, Welding Engineering, Manufacturing Engineering, and Quality Engineering to build quality into the process and prevent defects from moving downstream.

About G&W Electric: Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Learn more about our company by watching this video: https://www.youtube.com/watch?v=DMtAhsdYeUQ G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor

But we need to remove EEO boilerplate? The instruction says remove cookie/navigation/legal/EEO/equal-opportunity/scam-warning boilerplate. So we should remove the EEO statement and VEVRAA line. Also remove the repeated E-Verify line? It's not EEO but maybe legal? It's a statement about participation in E-Verify; could be considered legal boilerplate. The instruction says remove legal boilerplate. So we should remove the E-Verify lines as well. Also remove VEVRAA. So we keep only the company description without those legal bits. Thus we need to strip: - "G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law." - "G&W Electric participates in the E-Verify process for all new hires." (twice) - "VEVRAA Federal Contractor" We keep the rest. Now Responsibilities: we need to list duties. Could group into subheadings? Not required; just a list. We'll create

• items for each duty bullet. We need to preserve all substantive information; we can break down the long paragraphs into list items. We have sections: In-Process and Floor Inspection, Pre-Weld and Fit-Up Inspection, Weld Inspection, Dimensional Inspection, Final Inspection and Product Release, Nonconformance and Containment, Problem Solving and Continuous Improvement, Quality System and Documentation. We can create list items for each bullet under those headings, maybe keep the headings as plain text inside
• ? Better to keep headings as inside
• or just plain text. Since we only allowed

  for section headings, we cannot use other headings. So we can embed the subsection headings as part of the list item text. We'll produce a single

  with many
  • items, each containing the duty description. We must ensure we don't lose any detail. Let's extract duties: From In-Process and Floor Inspection: - Perform pre-weld, in-process, and final inspections according to drawings, specifications, inspection plans, and procedures. - Verify products meet requirements before they move to the next operation. - Identify quality issues and process deviations early to reduce rework, scrap, and production delays. - Provide immediate feedback to Welders, Team Leaders, and Supervisors when problems are found. - Verify all required inspections and quality checkpoints are completed. Pre-Weld and Fit-Up Inspection: - Verify materials, components, and configurations against drawings, BOMs, and specifications. - Inspect joint prep, fit-up, alignment, gaps, dimensions, cleanliness, and overall readiness for welding. - Verify weld locations, weld sizes, and welding symbols against engineering drawings. - Confirm the correct Welding Procedure Specification (WPS) is available and being followed. - Identify and contain nonconforming conditions before welding begins whenever possible. Weld Inspection: - Perform visual inspections of welded assemblies for compliance with drawings, WPS requirements, workmanship standards, and applicable welding codes. - Inspect weld size, length, location, profile, continuity, and overall workmanship. - Identify weld defects such as cracks, porosity, undercut, overlap, incomplete welds, arc strikes, excessive reinforcement, and other unacceptable conditions. - Inspect repaired or reworked welds before product release using appropriate weld gauges and measurement equipment. - Support additional NDT activities when required and properly qualified. Dimensional Inspection: - Inspect fabricated parts and welded assemblies against engineering drawings and specifications. - Verify critical dimensions, tolerances, alignment, squareness, flatness, hole locations, and other required characteristics. - Use calibrated inspection equipment such as calipers, micrometers, weld gauges, squares, tape measures, fixtures, and other measuring devices. - Perform dimensional inspections throughout the manufacturing process to identify problems before fabrication is complete. Final Inspection and Product Release: - Perform final visual and dimensional inspections of completed products. - Verify all required manufacturing and inspection steps have been completed. - Confirm all nonconformances and rework have been properly addressed. - Complete inspection records and quality documentation accurately and on time. Nonconformance and Containment: - Identify, document, tag, and segregate nonconforming material and products according to company procedures. - Initiate or support NCR/NCMR documentation as required. - Prevent nonconforming products from moving to the next operation without review and disposition. - Verify rework and repairs are completed correctly. - Support immediate containment when quality issues are identified. Problem Solving and Continuous Improvement: - Support root-cause investigations and corrective actions related to welding and fabrication defects. - Identify recurring quality problems and communicate trends to Production and Quality leadership. - Work with Production, Welding Engineering, Manufacturing Engineering, and Quality Engineering to eliminate recurring defects. - Participate in improvement efforts to reduce defects, rework, scrap, and downstream quality escapes. - Help verify corrective actions and process improvements on the manufacturing floor. Quality System and Documentation: - Maintain accurate inspection records and product traceability. - Follow Quality Plans, Control Plans, inspection procedures, work instructions, and mfg. standards. - Verify inspection equipment is calibrated and within its calibration period before use. - Report damaged, inaccurate, or out-of-calibration equipment. - Support internal and external quality audits as needed. - Keep quality records organized and accurate. Now Requirements: Education and Experience (minimum high school diploma or GED required; technical or manufacturing education preferred; previous quality inspection experience in welding, metal fabrication, machining, or manufacturing; ability to read and understand engineering drawings, tolerances, and welding symbols; working knowledge of welding and fabrication processes; ability to understand and follow Welding Procedure Specifications (WPS); experience using dimensional and weld inspection equipment; ability to accurately document inspection results and nonconformances; strong attention to detail and ability to identify quality and workmanship issues; strong communication skills with production employees, Team Leads, Supervisors, Engineers, & Quality.) We also have duplicate "Education and Experience:" heading; we combine. Now Qualifications: Preferred Experience inspecting MIG, TIG and other welding processes; Knowledge of applicable AWS