Quality Inspector 2 - 1st Shift
for sections like About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule. Use - for any list of duties/requirements/benefits, and
for prose. Do NOT repeat job title as heading. Do NOT put Job ID/requisition numbers as headings. Remove boilerplate, navigation, legal, EEO, equal-opportunity, scam-warning, duplicated lines, application instructions. Include a section only when posting has real, specific content for it — never emit heading followed by filler/placeholder text. Prefer few substantive sections over many thin ones.
We need to parse the posting.
Key info:
- Date posted: maybe not needed.
- Location: US-TX-SAN MARCOS-2005 ~ 2005 Technology Wy ~ TECHNOLOGY
- Position Role Type: Onsite
- U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.
- Security Clearance Type: None/Not Required
- Security Clearance Status: Not Required
- Joining Collins Aerospace ... (intro paragraph)
- 1st Shift: Monday-Friday 7AM – 3:30PM
- What You Will Do (list of duties)
- Qualifications You Must Have (list)
- Qualifications We Prefer (list)
- What We Offer (benefits list)
- Additional paragraphs about Advanced Structures team etc (maybe part of About the role)
- Additional benefits details later (maybe duplicate)
- Pay: Not specified explicitly. No pay amount given. So we should NOT create Pay section unless posting actually states them. It does not state pay. So omit Pay.
- Schedule: We have shift info: 1st Shift: Monday-Friday 7AM – 3:30PM. Also mention ability to work varying shifts, or overtime as required. So we can include Schedule section with that info.
- Benefits: The posting lists many benefits under "What We Offer". Also later mentions benefits again. So we can include Benefits section with that list.
- About the role: Could combine intro paragraph and description of team etc. We'll create About the role section with prose.
- Responsibilities: The "What You Will Do" list.
- Requirements: Could be the citizenship requirement and maybe shift? But we have Qualifications sections. Usually Requirements = mandatory qualifications. We'll treat "Qualifications You Must Have" as Requirements. Or we could separate Requirements (citizenship, shift) and Qualifications (education/experience). But we need to avoid thin sections. Maybe combine Requirements and Qualifications into one Qualifications section? But the instruction says use headings for sections like About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule. So we can have both Requirements and Qualifications if content exists. However we must avoid filler. Let's see content:
- Requirements: U.S. citizenship required. Also maybe "U.S. Citizen, U.S. Person, or Immigration Status Requirements". That's a requirement. Also maybe "Security Clearance Type: None/Not Required" not a requirement. So we can have Requirements section with that.
- Qualifications: "You Must Have" list (HS diploma, 1 year experience, experience performing inspections using blueprints, experience with precision measurement tools). Also "Qualifications We Prefer" list (basic math skills, computer systems, document review, SAP, 2+ years in aerospace inspection). Those could be under Qualifications (maybe split into Required and Preferred). But we can combine them under Qualifications heading with sub-lists? The instruction says use
- for any list of duties/requirements/benefits. So we can have separate lists under Qualifications: maybe separate headings? But we only allowed headings from the list; we cannot add custom headings like "Preferred Qualifications". Could embed both as separate
under Qualifications with preceding describing required vs preferred. That's okay.
- Skills: Could be derived from "Basic math skills", "computer systems", etc. But we already have them under Qualifications. Might be redundant. Better to not create Skills section if content overlaps; we can keep Qualifications.
- Benefits: list.
- Schedule: shift info.
- About the role: intro paragraph + description of Advanced Structures team etc.
We must remove boilerplate: EEO statements, privacy policy, application instructions like "Learn More & Apply Now!", "Please ensure the role type...", "Apply now and be part of the team...", "As part of our commitment..." etc. Also remove duplicated lines.
We need to preserve all substantive information. So we need to keep the description of role, responsibilities, qualifications, benefits, schedule, citizenship requirement.
Let's extract substantive content:
Intro paragraph: "Joining Collins Aerospace isn’t just about finding a job; it’s about embarking on a journey to redefine the future of aerospace technology. Collins Aerospace, an RTX company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio, and expertise to solve customers’ toughest challenges and to meet the demands of a rapidly evolving global market."
Then later: "Our Advanced Structures team leverages advanced materials and additive manufacturing to develop complex interior and exterior solutions. These solutions ensure structural integrity of the aircraft, help aircraft take off and land, stay trim in the air, move forward, carry cargo and conduct rescues. We delight our customers with superior products and best-in-class service. Our global team is committed to continuous improvement – we work hard to make our solutions lighter-weight, stronger and more technically advanced, so that plane travel can be safer, more affordable and more sustainable in the years to come. We are looking for the best and brightest to fly and land with us!"
That seems like About the role content.
Responsibilities list (What You Will Do):
- Inspection of Ship Loose Kits and kitting of parts
- Perform detailed product inspections on in process and finished goods, including but not limited to First Article Inspections.
- Document characteristics of products accurately and with technical detail.
- Initiate Quality Notifications for any non-conforming products.
- Apply quality assurance procedures and requirements to the inspection of hardware and to document reviews.
- Identify any potential quality issues early and help to prevent their occurrence.
- Communicate effectively to other Collins Aerospace personnel any quality issues needing resolution.
- Monitor and utilize calibrated measuring instruments.
- Safely Perform other duties as assigned
- Ability to work varying shifts, or overtime as required
Note: "Safely Preform other duties as assigned" typo but keep.
Qualifications You Must Have:
- Typically requires HS diploma (or equivalent, e.g. G.E.D. in the US) or vocational/technical education in related discipline with a minimum of 1 year of relevant experience.
- Experience performing manufacturing or product inspections using blueprints and specifications.
- Experience performing measurements with precision measurement tools, such as micrometers and calipers.
Qualifications We Prefer:
- Basic math skills including addition, subtraction, multiplication, division, fractions, and percentages.
- The ability to utilize computer systems including input of data and retrieval of information for inspections and configuration purposes.
- The ability to review documents and to identify and resolve any errors or missing information.
- Ability to use operating software including SAP
- 2+ years in an Aerospace or similar inspection role
Benefits (What We Offer):
- Medical, dental, and vision insurance
- Paid time off after 121 days
- Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option
- Tuition reimbursement program
- Student Loan Repayment Program
- Life insurance and disability coverage
- Optional coverages you can buy: pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection
- Birth, adoption, leave benefits
- Ovia Health, fertility, and family planning
- Adoption Assistance
- Autism Benefit
- Employee Assistance Plan, including up to 10 free counseling sessions
- Healthy You Incentives, wellness rewards program
- Doctor on Demand, virtual doctor visits
- Bright Horizons, child and elder care services
- Teladoc Medical Experts, second opinion program
- And more!
Later benefits duplicate but we can keep unique.
Schedule:
- 1st Shift: Monday-Friday 7AM – 3:30PM
- Ability to work varying shifts, or overtime as required
Requirements:
- U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.
Potential also: Position Role Type: Onsite (maybe include in About the role or Schedule? Could be part of About the role). But we can include a short sentence about Onsite in About the role.
We must not include headings with filler. Ensure each heading has substantive content.
We'll produce HTML:
About the role
Joining Collins Aerospace isn’t just about finding a job; it’s about embarking on a journey to redefine the future of aerospace technology. Collins Aerospace, an RTX company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio, and expertise to solve customers’ toughest challenges and to meet the demands of a rapidly evolving global market. Our Advanced Structures team leverages advanced materials and additive manufacturing to develop complex interior and exterior solutions. These solutions ensure structural integrity of the aircraft, help aircraft take off and land, stay trim in the air, move forward, carry cargo and conduct rescues. We delight our customers with superior products and best-in-class service. Our global team is committed to continuous improvement – we work hard to make our solutions lighter-weight, stronger and more technically advanced, so that plane travel can be safer, more affordable and more sustainable in the years to come. We are looking for the best and brightest to fly and land with us. This is an Onsite position.
Responsibilities
- Inspection of Ship Loose Kits and kitting of parts
- Perform detailed product inspections on in process and finished goods, including but not limited to First Article Inspections.
- Document characteristics of products accurately and with technical detail.
- Initiate Quality Notifications for any non-conforming products.
- Apply quality assurance procedures and requirements to the inspection of hardware and to document reviews.
- Identify any potential quality issues early and help to prevent their occurrence.
- Communicate effectively to other Collins Aerospace personnel any quality issues needing resolution.
- Monitor and utilize calibrated measuring instruments.
- Safely perform other duties as assigned
- Ability to work varying shifts, or overtime as required
Requirements
U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.
Qualifications
Required:
- Typically requires HS diploma (or equivalent, e.g. G.E.D. in the US) or vocational/technical education in related discipline with a minimum of 1 year of relevant experience.
- Experience performing manufacturing or product inspections using blueprints and specifications.
- Experience performing measurements with precision measurement tools, such as micrometers and calipers.
Preferred:
- Basic math skills including addition, subtraction, multiplication, division, fractions, and percentages.
- The ability to utilize computer systems including input of data and retrieval of information for inspections and configuration purposes.
- The ability to review documents and to identify and resolve any errors or missing information.
- Ability to use operating software including SAP.
- 2+ years in an Aerospace or similar inspection role.
Benefits
for prose. Do NOT repeat job title as heading. Do NOT put Job ID/requisition numbers as headings. Remove boilerplate, navigation, legal, EEO, equal-opportunity, scam-warning, duplicated lines, application instructions. Include a section only when posting has real, specific content for it — never emit heading followed by filler/placeholder text. Prefer few substantive sections over many thin ones. We need to parse the posting. Key info: - Date posted: maybe not needed. - Location: US-TX-SAN MARCOS-2005 ~ 2005 Technology Wy ~ TECHNOLOGY - Position Role Type: Onsite - U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. - Security Clearance Type: None/Not Required - Security Clearance Status: Not Required - Joining Collins Aerospace ... (intro paragraph) - 1st Shift: Monday-Friday 7AM – 3:30PM - What You Will Do (list of duties) - Qualifications You Must Have (list) - Qualifications We Prefer (list) - What We Offer (benefits list) - Additional paragraphs about Advanced Structures team etc (maybe part of About the role) - Additional benefits details later (maybe duplicate) - Pay: Not specified explicitly. No pay amount given. So we should NOT create Pay section unless posting actually states them. It does not state pay. So omit Pay. - Schedule: We have shift info: 1st Shift: Monday-Friday 7AM – 3:30PM. Also mention ability to work varying shifts, or overtime as required. So we can include Schedule section with that info. - Benefits: The posting lists many benefits under "What We Offer". Also later mentions benefits again. So we can include Benefits section with that list. - About the role: Could combine intro paragraph and description of team etc. We'll create About the role section with prose. - Responsibilities: The "What You Will Do" list. - Requirements: Could be the citizenship requirement and maybe shift? But we have Qualifications sections. Usually Requirements = mandatory qualifications. We'll treat "Qualifications You Must Have" as Requirements. Or we could separate Requirements (citizenship, shift) and Qualifications (education/experience). But we need to avoid thin sections. Maybe combine Requirements and Qualifications into one Qualifications section? But the instruction says use headings for sections like About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule. So we can have both Requirements and Qualifications if content exists. However we must avoid filler. Let's see content: - Requirements: U.S. citizenship required. Also maybe "U.S. Citizen, U.S. Person, or Immigration Status Requirements". That's a requirement. Also maybe "Security Clearance Type: None/Not Required" not a requirement. So we can have Requirements section with that. - Qualifications: "You Must Have" list (HS diploma, 1 year experience, experience performing inspections using blueprints, experience with precision measurement tools). Also "Qualifications We Prefer" list (basic math skills, computer systems, document review, SAP, 2+ years in aerospace inspection). Those could be under Qualifications (maybe split into Required and Preferred). But we can combine them under Qualifications heading with sub-lists? The instruction says use
- for any list of duties/requirements/benefits. So we can have separate lists under Qualifications: maybe separate headings? But we only allowed headings from the list; we cannot add custom headings like "Preferred Qualifications". Could embed both as separate
- under Qualifications with preceding
- Inspection of Ship Loose Kits and kitting of parts
- Perform detailed product inspections on in process and finished goods, including but not limited to First Article Inspections.
- Document characteristics of products accurately and with technical detail.
- Initiate Quality Notifications for any non-conforming products.
- Apply quality assurance procedures and requirements to the inspection of hardware and to document reviews.
- Identify any potential quality issues early and help to prevent their occurrence.
- Communicate effectively to other Collins Aerospace personnel any quality issues needing resolution.
- Monitor and utilize calibrated measuring instruments.
- Safely perform other duties as assigned
- Ability to work varying shifts, or overtime as required
- Typically requires HS diploma (or equivalent, e.g. G.E.D. in the US) or vocational/technical education in related discipline with a minimum of 1 year of relevant experience.
- Experience performing manufacturing or product inspections using blueprints and specifications.
- Experience performing measurements with precision measurement tools, such as micrometers and calipers.
- Basic math skills including addition, subtraction, multiplication, division, fractions, and percentages.
- The ability to utilize computer systems including input of data and retrieval of information for inspections and configuration purposes.
- The ability to review documents and to identify and resolve any errors or missing information.
- Ability to use operating software including SAP.
- 2+ years in an Aerospace or similar inspection role.
describing required vs preferred. That's okay. - Skills: Could be derived from "Basic math skills", "computer systems", etc. But we already have them under Qualifications. Might be redundant. Better to not create Skills section if content overlaps; we can keep Qualifications. - Benefits: list. - Schedule: shift info. - About the role: intro paragraph + description of Advanced Structures team etc. We must remove boilerplate: EEO statements, privacy policy, application instructions like "Learn More & Apply Now!", "Please ensure the role type...", "Apply now and be part of the team...", "As part of our commitment..." etc. Also remove duplicated lines. We need to preserve all substantive information. So we need to keep the description of role, responsibilities, qualifications, benefits, schedule, citizenship requirement. Let's extract substantive content: Intro paragraph: "Joining Collins Aerospace isn’t just about finding a job; it’s about embarking on a journey to redefine the future of aerospace technology. Collins Aerospace, an RTX company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio, and expertise to solve customers’ toughest challenges and to meet the demands of a rapidly evolving global market." Then later: "Our Advanced Structures team leverages advanced materials and additive manufacturing to develop complex interior and exterior solutions. These solutions ensure structural integrity of the aircraft, help aircraft take off and land, stay trim in the air, move forward, carry cargo and conduct rescues. We delight our customers with superior products and best-in-class service. Our global team is committed to continuous improvement – we work hard to make our solutions lighter-weight, stronger and more technically advanced, so that plane travel can be safer, more affordable and more sustainable in the years to come. We are looking for the best and brightest to fly and land with us!" That seems like About the role content. Responsibilities list (What You Will Do): - Inspection of Ship Loose Kits and kitting of parts - Perform detailed product inspections on in process and finished goods, including but not limited to First Article Inspections. - Document characteristics of products accurately and with technical detail. - Initiate Quality Notifications for any non-conforming products. - Apply quality assurance procedures and requirements to the inspection of hardware and to document reviews. - Identify any potential quality issues early and help to prevent their occurrence. - Communicate effectively to other Collins Aerospace personnel any quality issues needing resolution. - Monitor and utilize calibrated measuring instruments. - Safely Perform other duties as assigned - Ability to work varying shifts, or overtime as required Note: "Safely Preform other duties as assigned" typo but keep. Qualifications You Must Have: - Typically requires HS diploma (or equivalent, e.g. G.E.D. in the US) or vocational/technical education in related discipline with a minimum of 1 year of relevant experience. - Experience performing manufacturing or product inspections using blueprints and specifications. - Experience performing measurements with precision measurement tools, such as micrometers and calipers. Qualifications We Prefer: - Basic math skills including addition, subtraction, multiplication, division, fractions, and percentages. - The ability to utilize computer systems including input of data and retrieval of information for inspections and configuration purposes. - The ability to review documents and to identify and resolve any errors or missing information. - Ability to use operating software including SAP - 2+ years in an Aerospace or similar inspection role Benefits (What We Offer): - Medical, dental, and vision insurance - Paid time off after 121 days - Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option - Tuition reimbursement program - Student Loan Repayment Program - Life insurance and disability coverage - Optional coverages you can buy: pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection - Birth, adoption, leave benefits - Ovia Health, fertility, and family planning - Adoption Assistance - Autism Benefit - Employee Assistance Plan, including up to 10 free counseling sessions - Healthy You Incentives, wellness rewards program - Doctor on Demand, virtual doctor visits - Bright Horizons, child and elder care services - Teladoc Medical Experts, second opinion program - And more! Later benefits duplicate but we can keep unique. Schedule: - 1st Shift: Monday-Friday 7AM – 3:30PM - Ability to work varying shifts, or overtime as required Requirements: - U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Potential also: Position Role Type: Onsite (maybe include in About the role or Schedule? Could be part of About the role). But we can include a short sentence about Onsite in About the role. We must not include headings with filler. Ensure each heading has substantive content. We'll produce HTML:
About the role
Joining Collins Aerospace isn’t just about finding a job; it’s about embarking on a journey to redefine the future of aerospace technology. Collins Aerospace, an RTX company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio, and expertise to solve customers’ toughest challenges and to meet the demands of a rapidly evolving global market. Our Advanced Structures team leverages advanced materials and additive manufacturing to develop complex interior and exterior solutions. These solutions ensure structural integrity of the aircraft, help aircraft take off and land, stay trim in the air, move forward, carry cargo and conduct rescues. We delight our customers with superior products and best-in-class service. Our global team is committed to continuous improvement – we work hard to make our solutions lighter-weight, stronger and more technically advanced, so that plane travel can be safer, more affordable and more sustainable in the years to come. We are looking for the best and brightest to fly and land with us. This is an Onsite position.
Responsibilities
Requirements
U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.
Qualifications
Required:
Preferred:
Benefits