Press Operator Hydraulic & Mechanical A - 13706

Position Responsibilities

• Obtain work package from the ready-to-work rack, work board, or assigned by Team Lead, or run previously set-up jobs by reviewing tie-ins from prior operators.
• Operate a computer to access information from prints, sketches, drawings, layout documents, and Boeing (BAC) specifications.
• Perform safety checks on machines, ensuring the area is clear of obstacles, power switches are off, and safety guards are installed.
• Move heavy materials, equipment, tools, and dies to the work area using stackers, Kalamar, die loaders, or overhead cranes, asking for assistance as needed.
• Check steam lines for cracks or cuts and verify o-rings are properly seated prior to hookup.
• Preheat dies and punches using electricity or steam, and verify temperature accuracy for hot dies with a temperature stick or pyrometer.
• Determine machine setup by reviewing work orders, tooling usage instructions, and die setup charts, making adjustments as required.
• Load and secure dies into the press, checking for defects and torquing as necessary.
• Examine tools, dies, and fixtures for damage, separating them using appropriate handling procedures.
• Set up press cycle programs using control panels or manual switches to adjust height, stroke, pressure, and cycle time.
• Develop patterns when necessary, cutting and tailoring materials like fiberglass and graphite to die requirements.
• Perform pull-outs on various types of metal and alloy tubes using a hydraulic tube pull-out machine.
• Verify that materials are free from burrs and debris, using hand deburring tools and denatured alcohol prior to forming operations.
• Consult with Team Lead and other personnel (e.g., engineering, planning, inspection) on process or job-related issues as required.
• Maintain a written tie-in book or electronic communication to coordinate with other shifts and dispose of hazardous materials in an approved manner.

Physical Demands and Potential Hazards

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, bending, kneeling, crouching, and squatting.
• Work in environments that may involve contact with metals, solvents, and coolants.
• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
• Adapt to varying noise levels and atmospheric conditions.
• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

Basic Qualifications

• 1+ Years of experience setting and using precision measuring tools; equipment such as micrometers, calipers, and/or dial indicators.
• 1+ Years of experience reading blueprints and structural drawings.
• 1+ Years of experience operating a hydraulic press.
• Must be able to lift, push and pull up to 35 pounds frequently within an 8 hour shift.

Preferred Qualifications

• Ability to work in noisy environments while completing tasks.
• Must be able to stand, twist, bend, kneel and occasional crawling within an 8 hour shift.

Shift

This position is for a variety of shifts.

Total Rewards & Pay Transparency

• Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications

Applications for this position will be accepted until Jul. 18, 2026.