Inspector II – Electrical Solutions

We need to output HTML fragment with sections: About the role? Actually the description includes "Job Description" then "What You’ll Do". We need headings: About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule. Use only sections that have real content. We need to parse the posting. Content: - Intro: "The Operations Strategic Capabilities Unit plays a fundamental role..." That's about the role/unit. Could be "About the role". We'll put that as

About the role

...

- "What You’ll Do" is responsibilities. So

Responsibilities

• ... each bullet. List items: many tasks. We'll need to extract each bullet from the description. The description after "What You’ll Do" is a long paragraph with sentences separated by periods. We need to turn each into list items. We'll need to preserve all substantive info. Let's extract responsibilities: "Perform Printed Wiring Board/Assembly Inspections, to include, but not limited to soldering, staking, and conformal coat utilizing a Microscope." "Complete Inspections on Cable/Wire Harness Assemblies." "Inspect per IPC Certifications: IPC J-STD-001 with Space Addendum Soldering for Operators & Inspectors (CIS), Assembly of Electronic Assemblies (IPC-A-610), IPC/WHMA-A620, Requirements for Cable & Wire Harness Assemblies; these certifications are not required but preferred." "Work with devices/hardware that are Highly Sensitive Electrostatic Discharge Sensitive." "Maintain working knowledge of BAE Systems Space & Mission Systems (SMS) Process Library." "Perform basic dimensional inspections using micrometers, calipers, feeler gauges, etc." "Create and maintain First Article Inspection Reports, as required." "Support Government and/or Customer internal and Source Inspections, as required." "Inspect incoming or production hardware, assemblies or articles for conformance to engineering drawings, schematics, specifications, process standards, specifications, and production or process plans." "Perform incoming test of components. Monitor for conformance to design or test specifications or standards." "Accept or reject materials or articles; identify and document non-conformance and notify appropriate personnel of potential rejection of items." "Refer/document unusual inspection problems or defect trends to supervision, Lead or Quality Engineer." "Apply/enforce/comprehend accept/reject criteria from engineering drawings, specifications, or process certification training." "Witness or monitor functional/performance testing at sub-assembly and/or end-item level." "Support the following test inspections and functions as needed: Box-level integration inspections, ESTE/GSE certifications, vibration testing, thermal testing, TVAC testing, PWA testing, test troubleshooting, rack configuration changes, mate/demate of test connector interfaces and setup, execution and review of various test procedures." "Obtain and maintain all certifications required for assigned tasks." "Troubleshoot inspection problems related to fixtures, , drawings, documentation, or processes." (note extra comma; we keep as is.) "Perform Final Inspection and review documentation required for end-item shipments." "Maintain a regular and predictable work schedule." "Establish and maintain effective working relationships within the department, the Strategic Business Units, Strategic Capabilities Units and the Company. Interact appropriately with others in order to maintain a positive and productive work environment." "Perform other duties as necessary." "On-Site Work Environment: This position requires regular in-person engagement by working on-site five days each normally scheduled week in the primary work location. Travel and local commute between company campuses and other possible non-company locations may be required." "Working Conditions Work is performed in an office environment, laboratory, cleanroom, or production floor." We need to decide if we include On-Site Work Environment and Working Conditions under Responsibilities or maybe separate sections like Schedule? The schedule is about work schedule: "Maintain a regular and predictable work schedule." That's a responsibility but also schedule. The posting also mentions "On-Site Work Environment: ... five days each normally scheduled week". That's schedule info. We could create a Schedule section if we have explicit schedule info. The posting says "Maintain a regular and predictable work schedule." and "On-Site Work Environment: This position requires regular in-person engagement by working on-site five days each normally scheduled week". That's schedule. So we can create a Schedule section with that info. But we must not create sections unless posting has real specific content. It does have schedule info: five days each normally scheduled week, on-site. So we can create Schedule section. Also Pay: there is Pay Information: Full-Time Salary Range: $47614 - $76181. So we need Pay section. Benefits: there is Employee Benefits paragraph. So Benefits section. Requirements/Qualifications/Skills: The posting includes "Required Education, Experience, & Skills". That includes education, experience, willingness to relocate. Also mentions certifications preferred. So we can split into Requirements (education/experience) and Skills (maybe technical skills). But we need to avoid thin sections. Could combine Requirements and Qualifications into one section? The instruction says use headings for those categories if they have content. We have content for Required Education, Experience, & Skills. Could make a single section "Requirements" covering education, experience, willingness to relocate, certifications preferred. Skills could be separate if we have specific skills list (like microscopy, IPC, dimensional inspection, etc). But many of those are responsibilities. Might be better to have a "Qualifications" section for education/experience, and a "Skills" section for technical skills (like IPC certifications, microscopy, dimensional inspection, ESD sensitivity, etc). However we must not create thin sections. Let's see if we have enough for Skills: we can list: Microscope use for PWB inspection, soldering, staking, conformal coat; IPC J-STD-001 with Space Addendum, IPC-A-610, IPC/WHMA-A620; ESD sensitivity handling; basic dimensional inspection using micrometers, calipers, feeler gauges; First Article Inspection Reports; test procedures; troubleshooting; etc. That's substantive. But many of those also appear in responsibilities. However we can still list them as skills. We need to avoid duplication? Not prohibited. We just need to preserve all substantive info; duplication okay but better not. We'll create sections: - About the role (intro paragraph) - Responsibilities (list of duties) - Requirements (education, experience, willingness to relocate, certifications preferred) - Skills (technical skills: microscopy, IPC, ESD, dimensional inspection, FAIR, test support, troubleshooting, etc.) - Benefits - Pay - Schedule We must not include sections like Qualifications if we already have Requirements; but we can include Qualifications if we have content. We have Required Education, Experience, & Skills; we could treat that as Requirements. Qualifications could be same; but to avoid thin, we'll just use Requirements. Now we need to strip boilerplate: remove cookie/navigation/legal/EEO/equal-opportunity/scam-warning boilerplate, duplicated lines, application instructions. The posting includes "This position will be posted for at least 5 calendar days. The posting will remain active until the position is filled, or a qualified pool of candidates is identified." That's boilerplate; remove. Also "On-Site Work Environment:" we keep as part of Schedule. Now craft HTML. We'll need to escape any special characters? Not needed. Let's write.

  About the role

  The Operations Strategic Capabilities Unit plays a fundamental role in enabling efficient business and program execution – from strategic capital investments, industrial operations and an efficient supply chain, to state-of-the-art manufacturing and test operations and top-notch facilities management.

  Responsibilities

  • Perform Printed Wiring Board/Assembly Inspections, to include, but not limited to soldering, staking, and conformal coat utilizing a Microscope.
  • Complete Inspections on Cable/Wire Harness Assemblies.
  • Inspect per IPC Certifications: IPC J-STD-001 with Space Addendum Soldering for Operators & Inspectors (CIS), Assembly of Electronic Assemblies (IPC-A-610), IPC/WHMA-A620, Requirements for Cable & Wire Harness Assemblies; these certifications are not required but preferred.
  • Work with devices/hardware that are Highly Sensitive Electrostatic Discharge Sensitive.
  • Maintain working knowledge of BAE Systems Space & Mission Systems (SMS) Process Library.
  • Perform basic dimensional inspections using micrometers, calipers, feeler gauges, etc.
  • Create and maintain First Article Inspection Reports, as required.
  • Support Government and/or Customer internal and Source Inspections, as required.
  • Inspect incoming or production hardware, assemblies or articles for conformance to engineering drawings, schematics, specifications, process standards, specifications, and production or process plans.
  • Perform incoming test of components. Monitor for conformance to design or test specifications or standards.
  • Accept or reject materials or articles; identify and document non-conformance and notify appropriate personnel of potential rejection of items.
  • Refer/document unusual inspection problems or defect trends to supervision, Lead or Quality Engineer.
  • Apply/enforce/comprehend accept/reject criteria from engineering drawings, specifications, or process certification training.
  • Witness or monitor functional/performance testing at sub-assembly and/or end-item level.
  • Support the following test inspections and functions as needed: Box-level integration inspections, ESTE/GSE certifications, vibration testing, thermal testing, TVAC testing, PWA testing, test troubleshooting, rack configuration changes, mate/demate of test connector interfaces and setup, execution and review of various test procedures.
  • Obtain and maintain all certifications required for assigned tasks.
  • Troubleshoot inspection problems related to fixtures, drawings, documentation, or processes.
  • Perform Final Inspection and review documentation required for end-item shipments.
  • Maintain a regular and predictable work schedule.
  • Establish and maintain effective working relationships within the department, the Strategic Business Units, Strategic Capabilities Units and the Company. Interact appropriately with others in order to maintain a positive and productive work environment.
  • Perform other duties as necessary.
  Now Requirements section. We need to extract: "Required Education, Experience, & Skills High School diploma or equivalent plus 1 or more years of related experience.Each higher-level related degree, i.e., Bachelor’s or Master’s, may substitute for years of related experience. Degree must be from a university, college, or school which is accredited by an agency recognized by the US Secretary of Education, US Department of Education.Must also be willing to relocate permanently, as required, to work at different local company campuses to support business needs." Also certifications preferred mentioned earlier but we could put under Requirements as "Preferred: IPC J-STD-001 with Space Addendum, IPC-A-610, IPC/WHMA-A620". However we already listed certifications in responsibilities; but we can still include. Let's craft:

  Requirements

  • High School diploma or equivalent plus 1 or more years of related experience.
  • Each higher-level related degree (Bachelor’s, Master’s) may substitute for years of related experience.
  • Degree must be from an accredited institution recognized by the US Secretary of Education.
  • Willingness to relocate permanently to different local company campuses as required.
  • Preferred certifications: IPC J-STD-001 with Space Addendum, IPC-A-610, IPC/WHMA-A620 (not required but