Inspector
INEOS Olefins & Polymers USA, LLC · Alvin, TX · 1 mo ago
Engineering$102k–$132k/yrFull-time
We need to output HTML fragment with sections: headings for section headings like About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule. Only include sections if posting has real specific content. We have content: About the role (Organizational Context and Job Purpose). Responsibilities AND Accountabilities (responsibilities). Experience: Skills & Knowledge Required (experience, skills, knowledge). Also there is mention of Salary: $101,863 - $132,289 commensurate with experience. The rule says: never emit a heading followed by filler/placeholder text (e.g. "commensurate with experience", "not specified", "N/A", "varies", "TBD") and never create Pay/Schedule/Benefits sections unless the posting actually states them. Salary is given, but includes "commensurate with experience". That phrase is considered filler? The rule says never emit a heading followed by filler/placeholder text like "commensurate with experience". So if we create a Pay section, we must not have just that phrase. We could include the salary range and note it's commensurate with experience as part of the text. The rule says "never emit a heading followed by filler/placeholder text (e.g. 'commensurate with experience', 'not specified', 'N/A', 'varies', 'TBD')". That suggests if the only content for Pay is that phrase, we shouldn't include Pay section. But we have actual numbers plus that phrase. Is that considered filler? The phrase is attached to the range; maybe we can include the range and mention it's commensurate with experience as part of the description. The rule might be to avoid sections where the content is just that phrase. Since we have actual numbers, we can include Pay section with the range and note it's commensurate with experience. Probably acceptable.
Schedule: not mentioned. Benefits: not mentioned explicitly. So we omit Benefits and Schedule.
We need sections: About the role, Responsibilities, Requirements, Qualifications, Skills? The posting has "Experience: Skills & Knowledge Required". That includes experience, skills, knowledge. Could split into Requirements (experience, education, certifications) and Skills (technical skills). But we must not create thin sections. Perhaps combine into one section "Requirements and Skills". However headings list includes Requirements, Qualifications, Skills. We could use "Requirements" for experience, education, certifications; "Skills" for technical skills. That seems reasonable.
We need to preserve all substantive information. Let's extract:
About the role: Organizational Context and Job Purpose paragraph.
Responsibilities: The block under "Responsibilities AND Accountabilities" includes many bullet-like sentences. We need to convert to
for section headings like About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule. Only include sections if posting has real specific content. We have content: About the role (Organizational Context and Job Purpose). Responsibilities AND Accountabilities (responsibilities). Experience: Skills & Knowledge Required (experience, skills, knowledge). Also there is mention of Salary: $101,863 - $132,289 commensurate with experience. The rule says: never emit a heading followed by filler/placeholder text (e.g. "commensurate with experience", "not specified", "N/A", "varies", "TBD") and never create Pay/Schedule/Benefits sections unless the posting actually states them. Salary is given, but includes "commensurate with experience". That phrase is considered filler? The rule says never emit a heading followed by filler/placeholder text like "commensurate with experience". So if we create a Pay section, we must not have just that phrase. We could include the salary range and note it's commensurate with experience as part of the text. The rule says "never emit a heading followed by filler/placeholder text (e.g. 'commensurate with experience', 'not specified', 'N/A', 'varies', 'TBD')". That suggests if the only content for Pay is that phrase, we shouldn't include Pay section. But we have actual numbers plus that phrase. Is that considered filler? The phrase is attached to the range; maybe we can include the range and mention it's commensurate with experience as part of the description. The rule might be to avoid sections where the content is just that phrase. Since we have actual numbers, we can include Pay section with the range and note it's commensurate with experience. Probably acceptable.
Schedule: not mentioned. Benefits: not mentioned explicitly. So we omit Benefits and Schedule.
We need sections: About the role, Responsibilities, Requirements, Qualifications, Skills? The posting has "Experience: Skills & Knowledge Required". That includes experience, skills, knowledge. Could split into Requirements (experience, education, certifications) and Skills (technical skills). But we must not create thin sections. Perhaps combine into one section "Requirements and Skills". However headings list includes Requirements, Qualifications, Skills. We could use "Requirements" for experience, education, certifications; "Skills" for technical skills. That seems reasonable.
We need to preserve all substantive information. Let's extract:
About the role: Organizational Context and Job Purpose paragraph.
Responsibilities: The block under "Responsibilities AND Accountabilities" includes many bullet-like sentences. We need to convert to - . The text includes many sentences separated by periods. We'll split into list items each representing a responsibility.
We must not repeat job title as heading. No Job ID.
We need to remove boilerplate: cookie/navigation/legal/EEO etc. Not present.
Now craft HTML.
Structure:
About the role
... (the organizational context paragraph)
Responsibilities
- ... each responsibility
...
Requirements
- Minimum of 5 years of pressure vessel and piping inspection experience in the Petrochemical, Refining or Power industry or 5 years of pressure vessel and piping inspection experience in the oil and gas exploration and production industry.
- High School Diploma or equivalent required.
- Current API-510 or API-570 certification required.
- Previous certification with ASNT-TC-1A or equivalent Level II NDE certification in VT, PT, MT, UTTM & RTFI.
Maybe also include "Preferred: A 2-year Associate of Applied Science Degree in Welding Inspection and/or Non-Destructive Examination (NDE) or similar related technical school diploma." etc. Those are preferred, could be included as separate list items under Requirements or maybe under Skills. But we can include them as part of Requirements as preferred qualifications.
Better to separate: Requirements (mandatory) and Qualifications (preferred). But we have limited headings. Could use Requirements for mandatory, Qualifications for preferred. Then Skills for technical skills.
Let's do:
Requirements
mandatory items
Qualifications
preferred items
Skills
technical skills
Pay
Salary range: $101,863 - $132,289 (commensurate with experience).
We must ensure not to create heading with filler only. Pay section has actual range plus note; acceptable.
Now extract responsibilities list.
Responsibilities text:
"The responsibilities for this position shall include but are not limited to; PSM Compliance for process piping and fixed process equipment, ensure the mechanical integrity of the unit’s process equipment and provide support to members of supervision and management as needed. This position will require interaction with first level leaders (team leaders), and contract NDE technicians, contract maintenance personnel, engineering resources and other inspection team members. The Inspector shall ensure all PSM compliance inspections are properly documented using electronic reports. The Inspector will perform inspections of process piping and equipment as scheduled through use of the site’s Plant Condition Management Software (PCMS). These inspections are an integral part of assessing the integrity of process equipment and providing recommendations to the Chief Inspector and other members of supervision for the correction of deficiencies. The Inspector will aid the Chief Inspector in following repairs to process piping and equipment as needed performing infrared surveys of furnaces and boilers. The Inspector will assist the Chief Inspector as requested by performing a quality assurance role during Capital Project scheduled on site. The Inspector will fill in for the Chief Inspector as needed during absences."
Then there is "Accountability 1: Inspection of Equipment Most Important Activities:" with many bullet-like sentences. Then "Accountability 2: Teamwork Most Important Activities:" and "Accountability 3: SHE Activities Most Important Activities:".
We need to preserve all substantive information. So we should include those as list items under Responsibilities.
Let's extract each sentence as list item.
From first paragraph:
- PSM Compliance for process piping and fixed process equipment; ensure the mechanical integrity of the unit’s process equipment and provide support to members of supervision and management as needed.
- Interaction with first level leaders (team leaders), contract NDE technicians, contract maintenance personnel, engineering resources and other inspection team members.
- Ensure all PSM compliance inspections are properly documented using electronic reports.
- Perform inspections of process piping and equipment as scheduled through use of the site’s Plant Condition Management Software (PCMS).
- These inspections are an integral part of assessing the integrity of process equipment and providing recommendations to the Chief Inspector and other members of supervision for the correction of deficiencies.
- Aid the Chief Inspector in following repairs to process piping and equipment as needed performing infrared surveys of furnaces and boilers.
- Assist the Chief Inspector as requested by performing a quality assurance role during Capital Project scheduled on site.
- Fill in for the Chief Inspector as needed during absences.
Now Accountability 1 items:
"Support the Chief Inspector and Unit Personnel as needed to ensure all inspection activities are properly performed in accordance with the INEOS Mechanical Integrity Management and Quality Assurance manuals."
"Perform and support the inspection of the unit’s fixed equipment through the use of condition monitoring programs, periodic external and internal inspections and non-destructive examinations as scheduled in the areas of assigned responsibilities."
"Assist with scheduling and inspection of the required jurisdictional inspections."
"Provide technical expertise for inspection activities, design, and repair and alteration consultation with the Chief Inspector, Unit Support team and Engineering as needed."
"Assist in developing and stewarding inspection programs, practices and procedures that are designed to help ensure the mechanical reliability availability and operational safety of fixed equipment."
"Communicate with and educate customers and other individuals who have varying degrees of understanding of the fixed equipment inspection process."
"Ensure quality and completeness of all inspections and documentation prior to forwarding of data to the Chief Inspector and /or members of supervision for review."
"Stay current with changes and/or addenda to industry codes, specifications and jurisdictional requirements to ensure the overall inspection program maintains compliance."
"Ensure all required documentation for new equipment fabrication is received and reviewed for accuracy and all required baseline inspections have been completed prior to the equipment being placed into service."
"Assist the Chief inspector as needed in reviewing design and/or repair engineering packages to assure the appropriate level of NDE has been specified."
"Fulfill Job representative responsibilities when contact personnel are on-site working through the inspection team. Ensure contractors follow all site safety rules and take time to identify all possible hazards with the work they are about to perform before the work is started. Ensure proper steps are taken to mitigate any potential hazards identified by the contractor prior to the start of work."
That's a long sentence; could split but keep as one.
Accountability 2:
"Assist other Inspectors in developing/organizing cycle ending TAR Inspection Plans for assigned areas of responsibility."
"Aid and support other INEOS Inspectors as needed during routine times and during unit outages."
"Work with the other Inspectors to coordinate inspection resources for on-site activities as well as coverage of repaired and/or fabricated items at off-site vendor facilities."
"Work with all inspection team members to ensure consistent inspection practices are implemented across the site’s units."
"Assist the inspection team in researching, studying, understanding and recognizing the applicability and limitations of new inspection technology as it becomes available."
Accountability 3:
"Promote individual and team safety by participating in department and unit safety meetings."
"Attend and participate in inspection related Job Safety Analysis reviews."
"Assist the Chief Inspectors in assuring that all inspections are performed in a safe manner and in accordance with applicable safety requirements."
Now Requirements (mandatory):
- Minimum of 5 years of pressure vessel and piping inspection experience in the Petrochemical, Refining or Power industry or 5 years of pressure vessel and piping inspection experience in the oil and gas exploration and production industry.
- High School Diploma or equivalent required.
- Current API-510 or API-570 certification required.
- Previous certification with ASNT-TC-1A or equivalent Level II NDE certification in VT, PT, MT, UTTM & RTFI.
Qualifications (preferred):
- A 2-year Associate of Applied Science Degree in Welding Inspection and/or Non-Destructive Examination (NDE) or similar related technical school diploma.
- American Welding Society Certified Welder Inspector Certification.
- API 653 Inspector Certification Aboveground Storage Tanks.
- Previous level 2 NDE certification a plus.
Skills:
- Experience with the American Society of Mechanical Engineers (ASME) fabrication and design codes and similar industry standards, practices and/or specifications.
- Experience with ASME and American Petroleum Institute (API) inspection codes and similar industry standards, practices and/or specifications.
- Intermediate level experience with MS Excel, Word and Outlook.
- Good communication skills particularly with technical writing and oral presentations.
- The ability to manage and prioritize multiple tasks simultaneously by use of good organization skills are essential to this position.
- Experience with SAP and PCMS/RBI Inspection software.
- Experience with AutoCAD.
- Experience/knowledge of oil and gas Industry related mechanical, maintenance, welding, fabrication, metallurgy and corrosion.
Now Pay:
- Salary range: $101,863 - $132,289 (commensurate with experience).
Now About the role paragraph:
"The Olefins and Polymers, USA division of INEOS is one of the largest producers of Olefins and Polymers in North America, from its manufacturing locations at Chocolate Bayou, Battleground Manufacturing Complex, and Carson, California, it is a merchant marketer of Butadiene, Ethylene, Polypropylene and High-density Polyethylene with annual revenue of over $4b. The primary assignment for this position is at the Chocolate Bayou Site. The Chocolate Bayou Site is located in Southeastern Texas about 40 miles South of Houston and consists of
About the role
... (the organizational context paragraph)
Responsibilities
- ... each responsibility ...
Requirements
- Minimum of 5 years of pressure vessel and piping inspection experience in the Petrochemical, Refining or Power industry or 5 years of pressure vessel and piping inspection experience in the oil and gas exploration and production industry.
- High School Diploma or equivalent required.
- Current API-510 or API-570 certification required.
- Previous certification with ASNT-TC-1A or equivalent Level II NDE certification in VT, PT, MT, UTTM & RTFI.
Requirements
- mandatory items
Qualifications
- preferred items
Skills
- technical skills
Pay
Salary range: $101,863 - $132,289 (commensurate with experience).
We must ensure not to create heading with filler only. Pay section has actual range plus note; acceptable. Now extract responsibilities list. Responsibilities text: "The responsibilities for this position shall include but are not limited to; PSM Compliance for process piping and fixed process equipment, ensure the mechanical integrity of the unit’s process equipment and provide support to members of supervision and management as needed. This position will require interaction with first level leaders (team leaders), and contract NDE technicians, contract maintenance personnel, engineering resources and other inspection team members. The Inspector shall ensure all PSM compliance inspections are properly documented using electronic reports. The Inspector will perform inspections of process piping and equipment as scheduled through use of the site’s Plant Condition Management Software (PCMS). These inspections are an integral part of assessing the integrity of process equipment and providing recommendations to the Chief Inspector and other members of supervision for the correction of deficiencies. The Inspector will aid the Chief Inspector in following repairs to process piping and equipment as needed performing infrared surveys of furnaces and boilers. The Inspector will assist the Chief Inspector as requested by performing a quality assurance role during Capital Project scheduled on site. The Inspector will fill in for the Chief Inspector as needed during absences." Then there is "Accountability 1: Inspection of Equipment Most Important Activities:" with many bullet-like sentences. Then "Accountability 2: Teamwork Most Important Activities:" and "Accountability 3: SHE Activities Most Important Activities:". We need to preserve all substantive information. So we should include those as list items under Responsibilities. Let's extract each sentence as list item. From first paragraph: - PSM Compliance for process piping and fixed process equipment; ensure the mechanical integrity of the unit’s process equipment and provide support to members of supervision and management as needed. - Interaction with first level leaders (team leaders), contract NDE technicians, contract maintenance personnel, engineering resources and other inspection team members. - Ensure all PSM compliance inspections are properly documented using electronic reports. - Perform inspections of process piping and equipment as scheduled through use of the site’s Plant Condition Management Software (PCMS). - These inspections are an integral part of assessing the integrity of process equipment and providing recommendations to the Chief Inspector and other members of supervision for the correction of deficiencies. - Aid the Chief Inspector in following repairs to process piping and equipment as needed performing infrared surveys of furnaces and boilers. - Assist the Chief Inspector as requested by performing a quality assurance role during Capital Project scheduled on site. - Fill in for the Chief Inspector as needed during absences. Now Accountability 1 items: "Support the Chief Inspector and Unit Personnel as needed to ensure all inspection activities are properly performed in accordance with the INEOS Mechanical Integrity Management and Quality Assurance manuals." "Perform and support the inspection of the unit’s fixed equipment through the use of condition monitoring programs, periodic external and internal inspections and non-destructive examinations as scheduled in the areas of assigned responsibilities." "Assist with scheduling and inspection of the required jurisdictional inspections." "Provide technical expertise for inspection activities, design, and repair and alteration consultation with the Chief Inspector, Unit Support team and Engineering as needed." "Assist in developing and stewarding inspection programs, practices and procedures that are designed to help ensure the mechanical reliability availability and operational safety of fixed equipment." "Communicate with and educate customers and other individuals who have varying degrees of understanding of the fixed equipment inspection process." "Ensure quality and completeness of all inspections and documentation prior to forwarding of data to the Chief Inspector and /or members of supervision for review." "Stay current with changes and/or addenda to industry codes, specifications and jurisdictional requirements to ensure the overall inspection program maintains compliance." "Ensure all required documentation for new equipment fabrication is received and reviewed for accuracy and all required baseline inspections have been completed prior to the equipment being placed into service." "Assist the Chief inspector as needed in reviewing design and/or repair engineering packages to assure the appropriate level of NDE has been specified." "Fulfill Job representative responsibilities when contact personnel are on-site working through the inspection team. Ensure contractors follow all site safety rules and take time to identify all possible hazards with the work they are about to perform before the work is started. Ensure proper steps are taken to mitigate any potential hazards identified by the contractor prior to the start of work." That's a long sentence; could split but keep as one. Accountability 2: "Assist other Inspectors in developing/organizing cycle ending TAR Inspection Plans for assigned areas of responsibility." "Aid and support other INEOS Inspectors as needed during routine times and during unit outages." "Work with the other Inspectors to coordinate inspection resources for on-site activities as well as coverage of repaired and/or fabricated items at off-site vendor facilities." "Work with all inspection team members to ensure consistent inspection practices are implemented across the site’s units." "Assist the inspection team in researching, studying, understanding and recognizing the applicability and limitations of new inspection technology as it becomes available." Accountability 3: "Promote individual and team safety by participating in department and unit safety meetings." "Attend and participate in inspection related Job Safety Analysis reviews." "Assist the Chief Inspectors in assuring that all inspections are performed in a safe manner and in accordance with applicable safety requirements." Now Requirements (mandatory): - Minimum of 5 years of pressure vessel and piping inspection experience in the Petrochemical, Refining or Power industry or 5 years of pressure vessel and piping inspection experience in the oil and gas exploration and production industry. - High School Diploma or equivalent required. - Current API-510 or API-570 certification required. - Previous certification with ASNT-TC-1A or equivalent Level II NDE certification in VT, PT, MT, UTTM & RTFI. Qualifications (preferred): - A 2-year Associate of Applied Science Degree in Welding Inspection and/or Non-Destructive Examination (NDE) or similar related technical school diploma. - American Welding Society Certified Welder Inspector Certification. - API 653 Inspector Certification Aboveground Storage Tanks. - Previous level 2 NDE certification a plus. Skills: - Experience with the American Society of Mechanical Engineers (ASME) fabrication and design codes and similar industry standards, practices and/or specifications. - Experience with ASME and American Petroleum Institute (API) inspection codes and similar industry standards, practices and/or specifications. - Intermediate level experience with MS Excel, Word and Outlook. - Good communication skills particularly with technical writing and oral presentations. - The ability to manage and prioritize multiple tasks simultaneously by use of good organization skills are essential to this position. - Experience with SAP and PCMS/RBI Inspection software. - Experience with AutoCAD. - Experience/knowledge of oil and gas Industry related mechanical, maintenance, welding, fabrication, metallurgy and corrosion. Now Pay: - Salary range: $101,863 - $132,289 (commensurate with experience). Now About the role paragraph: "The Olefins and Polymers, USA division of INEOS is one of the largest producers of Olefins and Polymers in North America, from its manufacturing locations at Chocolate Bayou, Battleground Manufacturing Complex, and Carson, California, it is a merchant marketer of Butadiene, Ethylene, Polypropylene and High-density Polyethylene with annual revenue of over $4b. The primary assignment for this position is at the Chocolate Bayou Site. The Chocolate Bayou Site is located in Southeastern Texas about 40 miles South of Houston and consists of