I&E Technician
for sections like About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule. We must include only sections with real content.
We have content: company description, pay range, benefits, summary, essential duties, required education, required experience, required qualifications, preferred qualifications, working conditions, disclaimer (but disclaimer is boilerplate? It's generic; we should remove boilerplate like disclaimer? The instruction: Remove cookie/navigation/legal/EEO/equal-opportunity/scam-warning boilerplate, duplicated lines, and application instructions. Disclaimer might be considered boilerplate? It's a generic statement about job description not exhaustive. Might be considered boilerplate; but it's not EEO etc. However it's a generic disclaimer; likely we should remove it as it's not substantive. We'll drop it.
We need to preserve all substantive info.
We need sections: About the role (maybe company description and summary). Responsibilities (essential duties). Requirements (maybe required education/experience). Qualifications (required qualifications). Skills (maybe preferred qualifications? Or we could combine). Benefits (benefits). Pay (pay range). Schedule (maybe working conditions includes schedule? Not explicit schedule; but we have call-outs, overnight travel, etc. Could be schedule info. We'll include Schedule section if we have info: "Subject to call-outs to respond to operational issues and emergencies after working hours, at night, and on weekends and holidays. Occasional overnight travel may be required." That's schedule-ish. We'll include Schedule.
We must not repeat job title as heading. No Job ID.
We must use - for any list of duties/requirements/benefits. Use
for prose.
We need to avoid filler like "Commences With The Selected Job Level" etc. Required Experience line: "Minimum of 0 – 2 years of relevant industry experience or equivalent work experience". That's substantive.
We need to preserve all substantive info; not invent.
Let's extract:
Company description: Sunoco LP is a leading energy infrastructure and fuel distribution master limited partnership operating across 32 countries and territories in North America, the Greater Caribbean, and Europe. The Partnership’s midstream operations include an extensive network of approximately 14,000 miles of pipeline and over 160 terminals. This critical infrastructure complements the Partnership’s fuel distribution operations, which distribute over 15 billion gallons annually to approximately 11,000 Sunoco and partner-branded retail locations, as well as independent dealers and commercial customers. At Sunoco, we take great pride in what we do and wholeheartedly believe our employees drive success for our company and our customers. We are always looking for the best and brightest talent and we are committed to making your job a challenging and rewarding experience.
Pay range: This role has a current pay range of $32.00/hr – $41.60/hr. The listed pay range represents the company’s good faith estimate of the minimum and maximum base rate of pay for this position at the time of this posting. The selected candidate’s compensation will be determined based on their work location, qualifications, relevant experience, operational needs, demonstrated performance over time, and internal pay alignment.
Benefits: We are proud to offer industry leading compensation, comprehensive benefits including access to health, vision and dental insurance, 401(k) match with additional profit sharing, PTO, and abundant career opportunities.
Summary: This position provides instrument and electrical technical support to construction, plant facilities and field operations. The position will repair, install, troubleshoot, and perform predictive and preventative maintenance tasks on control systems, natural gas compression or pump stations, SCADA, and other equipment contained within gas and liquid facilities and pipelines. Additionally, this position will inspect, troubleshoot, and maintain process control systems such as PLCs or DCS and other similar equipment.
Essential Duties And Responsibilities list:
- Install, diagnose, and maintain SCADA systems, plant, pipeline, and compressor instrument and electrical equipment components with all job duties and responsibilities executed in a reliable and efficient manner while in compliance with the Partnership’s procedures and regulatory requirements.
- Install, diagnose, and maintain pneumatic and intelligent instruments, electrical distribution systems, motor control gear, and associated equipment software
- Install, diagnose, and maintain PLC's or DCS systems & process or safety controls
- Read and interpret manuals, policy, engineering standards, regulations, drawings, and schematics, including electrical, pneumatic, and P&ID’s
- Test, calibrate, and document plant and compressor station control and safety devices per DOT 192, DOT 193, DOT 195 or applicable PSM 1910 requirements and ensure frequencies of required preventative maintenance task are kept current
- Participate in call out/on call requirements
- Actively participate in partnership safety programs and initiatives
- Provide specialized technical skills (i.e. develops complex design projects, cost estimates, evaluates electrical systems, build and maintain ESD systems, maintain gas turbine or skid unit control systems)
- Provide work direction, oversight, and inspect other work provided by third party contractors
- Provide mentoring and oversight to less qualified employees
- Provide accurate written and electronic reporting
- Comply with partnership safety policies and procedures
- Perform energy isolation lockout/tagout procedures (LOTO)
Required Education: High school diploma or GED
Required Experience: Minimum of 0 – 2 years of relevant industry experience or equivalent work experience
Required Qualifications:
- Valid driver’s license with demonstrated safe driving record
- Ability to maintain motor controls, relay logic, RTU's, I&E associated end-devices
- Proficiency with MS Office Suite including Outlook and Word
- Experience using software to troubleshoot, design, or configure control solutions specific to In Touch Wonderware or Factory Talk, Allen Bradley RSLogix, or Delta V
- Extensive knowledge of DOT 192 DOT 193, and DOT 195, as it pertains to required testing and documentation for plants, compressor stations, pipelines, and/or facilities as required
- Demonstrated understanding of the National Electric Code and OSHA 1910 as it relates to electrical systems
Preferred Qualifications:
- State Electrical License
- Associates Degree in Instrumentation
- Related software and system certifications (i.e. Factory Talk, Delta V, etc.)
Working Conditions And Requirements:
- Frequent exposure to heat, cold, and other adverse weather conditions
- Repetitively standing, walking, bending, stretching, reaching over shoulder height, and climbing ladders up to 25 feet.
- Occasionally lifting up to 50 lbs with or without assistance
- Working conditions may include confined spaces
- Subject to call-outs to respond to operational issues and emergencies after working hours, at night, and on weekends and holidays
- Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and may require appropriate personal protective equipment
- Reliable attendance at work
- Occasional overnight travel may be required
We need to map to sections.
About the role: Could combine company description and summary? The summary is about role. We'll have About the role: company description. Responsibilities: essential duties. Requirements: required education + experience? Could be separate sections but we want few substantive sections. Could have Requirements (education+experience). Qualifications: required qualifications. Skills: preferred qualifications? Or we could put preferred qualifications under Qualifications as well. But we need to follow headings list: About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule.
We'll assign:
- About the role: company description (maybe also summary? but summary is more role-specific; could go under About the role as well). We'll include both company description and summary in About the role as prose.
- Responsibilities: essential duties list.
- Requirements: required education and required experience (maybe as list).
- Qualifications: required qualifications list.
- Skills: preferred qualifications list (or could be skills). We'll treat as Skills.
- Benefits: benefits list.
- Pay: pay range info.
- Schedule: working conditions that relate to schedule: call-outs, overnight travel, etc. Also maybe include other working conditions? But schedule section should contain schedule-specific info. We'll include call-outs, overnight travel, etc. Could also include "Reliable attendance at work". That's schedule-ish.
We must not include filler like "commensurate with experience". Not present.
We must not include boilerplate like disclaimer.
We must not repeat job title.
Now produce HTML.
We need to wrap each section:
About the role
then ... maybe multiple paragraphs. For lists use
- .
We must not include any extra tags like or . Just fragment.
Let's craft.
About the role: combine company description and summary.
Company description paragraph: "Sunoco LP is a leading energy infrastructure and fuel distribution master limited partnership operating across 32 countries and territories in North America, the Greater Caribbean, and Europe. The Partnership’s midstream operations include an extensive network of approximately 14,000 miles of pipeline and over 160 terminals. This critical infrastructure complements the Partnership’s fuel distribution operations, which distribute over 15 billion gallons annually to approximately 11,000 Sunoco and partner-branded retail locations, as well as independent dealers and commercial customers. At Sunoco, we take great pride in what we do and wholeheartedly believe our employees drive success for our company and our customers. We are always looking for the best and brightest talent and we are committed to making your job a challenging and rewarding experience."
Then summary paragraph: "This position provides instrument and electrical technical support to construction, plant facilities and field operations. The position will repair, install, troubleshoot, and perform predictive and preventative maintenance tasks on control systems, natural gas compression or pump stations, SCADA, and other equipment contained within gas and liquid facilities and pipelines. Additionally, this position will inspect, troubleshoot, and maintain process control systems such as PLCs or DCS and other similar equipment."
We could combine into one
but better separate paragraphs.
Responsibilities: list of duties.
We'll produce
Responsibilities
- ... each duty.
Make sure to keep the exact wording.
Let's list duties exactly as in text:
1. Install, diagnose, and maintain SCADA systems, plant, pipeline, and compressor instrument and electrical equipment components with all job duties and responsibilities executed in a reliable and efficient manner while in compliance with the Partnership’s procedures and regulatory requirements.
2. Install, diagnose, and maintain pneumatic and intelligent instruments, electrical distribution systems, motor control gear, and associated equipment software
3. Install, diagnose, and maintain PLC's or DCS systems & process or safety controls
4. Read and interpret manuals, policy, engineering standards, regulations, drawings, and schematics, including electrical, pneumatic, and P&ID’s
5. Test, calibrate, and document plant and compressor station control and safety devices per DOT 192, DOT 193, DOT 195 or applicable PSM 1910 requirements and ensure frequencies of required preventative maintenance task are kept current
6. Participate in call out/on call requirements
7. Actively participate in partnership safety programs and initiatives
8. Provide specialized technical skills (i.e. develops complex design projects, cost estimates, evaluates electrical systems, build and maintain ESD systems, maintain gas turbine or skid unit control systems)
9. Provide work direction, oversight, and inspect other work provided by third party contractors
10. Provide mentoring and oversight to less qualified employees
11. Provide accurate written and electronic reporting
12. Comply with partnership safety policies and procedures
13. Perform energy isolation lockout/tagout procedures (LOTO)
Check for any missing: The original also had "Provide specialized technical skills (i.e. develops complex design projects, cost estimates, evaluates electrical systems, build and maintain ESD systems, maintain gas turbine or sk
for prose. We need to avoid filler like "Commences With The Selected Job Level" etc. Required Experience line: "Minimum of 0 – 2 years of relevant industry experience or equivalent work experience". That's substantive. We need to preserve all substantive info; not invent. Let's extract: Company description: Sunoco LP is a leading energy infrastructure and fuel distribution master limited partnership operating across 32 countries and territories in North America, the Greater Caribbean, and Europe. The Partnership’s midstream operations include an extensive network of approximately 14,000 miles of pipeline and over 160 terminals. This critical infrastructure complements the Partnership’s fuel distribution operations, which distribute over 15 billion gallons annually to approximately 11,000 Sunoco and partner-branded retail locations, as well as independent dealers and commercial customers. At Sunoco, we take great pride in what we do and wholeheartedly believe our employees drive success for our company and our customers. We are always looking for the best and brightest talent and we are committed to making your job a challenging and rewarding experience. Pay range: This role has a current pay range of $32.00/hr – $41.60/hr. The listed pay range represents the company’s good faith estimate of the minimum and maximum base rate of pay for this position at the time of this posting. The selected candidate’s compensation will be determined based on their work location, qualifications, relevant experience, operational needs, demonstrated performance over time, and internal pay alignment. Benefits: We are proud to offer industry leading compensation, comprehensive benefits including access to health, vision and dental insurance, 401(k) match with additional profit sharing, PTO, and abundant career opportunities. Summary: This position provides instrument and electrical technical support to construction, plant facilities and field operations. The position will repair, install, troubleshoot, and perform predictive and preventative maintenance tasks on control systems, natural gas compression or pump stations, SCADA, and other equipment contained within gas and liquid facilities and pipelines. Additionally, this position will inspect, troubleshoot, and maintain process control systems such as PLCs or DCS and other similar equipment. Essential Duties And Responsibilities list: - Install, diagnose, and maintain SCADA systems, plant, pipeline, and compressor instrument and electrical equipment components with all job duties and responsibilities executed in a reliable and efficient manner while in compliance with the Partnership’s procedures and regulatory requirements. - Install, diagnose, and maintain pneumatic and intelligent instruments, electrical distribution systems, motor control gear, and associated equipment software - Install, diagnose, and maintain PLC's or DCS systems & process or safety controls - Read and interpret manuals, policy, engineering standards, regulations, drawings, and schematics, including electrical, pneumatic, and P&ID’s - Test, calibrate, and document plant and compressor station control and safety devices per DOT 192, DOT 193, DOT 195 or applicable PSM 1910 requirements and ensure frequencies of required preventative maintenance task are kept current - Participate in call out/on call requirements - Actively participate in partnership safety programs and initiatives - Provide specialized technical skills (i.e. develops complex design projects, cost estimates, evaluates electrical systems, build and maintain ESD systems, maintain gas turbine or skid unit control systems) - Provide work direction, oversight, and inspect other work provided by third party contractors - Provide mentoring and oversight to less qualified employees - Provide accurate written and electronic reporting - Comply with partnership safety policies and procedures - Perform energy isolation lockout/tagout procedures (LOTO) Required Education: High school diploma or GED Required Experience: Minimum of 0 – 2 years of relevant industry experience or equivalent work experience Required Qualifications: - Valid driver’s license with demonstrated safe driving record - Ability to maintain motor controls, relay logic, RTU's, I&E associated end-devices - Proficiency with MS Office Suite including Outlook and Word - Experience using software to troubleshoot, design, or configure control solutions specific to In Touch Wonderware or Factory Talk, Allen Bradley RSLogix, or Delta V - Extensive knowledge of DOT 192 DOT 193, and DOT 195, as it pertains to required testing and documentation for plants, compressor stations, pipelines, and/or facilities as required - Demonstrated understanding of the National Electric Code and OSHA 1910 as it relates to electrical systems Preferred Qualifications: - State Electrical License - Associates Degree in Instrumentation - Related software and system certifications (i.e. Factory Talk, Delta V, etc.) Working Conditions And Requirements: - Frequent exposure to heat, cold, and other adverse weather conditions - Repetitively standing, walking, bending, stretching, reaching over shoulder height, and climbing ladders up to 25 feet. - Occasionally lifting up to 50 lbs with or without assistance - Working conditions may include confined spaces - Subject to call-outs to respond to operational issues and emergencies after working hours, at night, and on weekends and holidays - Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and may require appropriate personal protective equipment - Reliable attendance at work - Occasional overnight travel may be required We need to map to sections. About the role: Could combine company description and summary? The summary is about role. We'll have About the role: company description. Responsibilities: essential duties. Requirements: required education + experience? Could be separate sections but we want few substantive sections. Could have Requirements (education+experience). Qualifications: required qualifications. Skills: preferred qualifications? Or we could put preferred qualifications under Qualifications as well. But we need to follow headings list: About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule. We'll assign: - About the role: company description (maybe also summary? but summary is more role-specific; could go under About the role as well). We'll include both company description and summary in About the role as prose. - Responsibilities: essential duties list. - Requirements: required education and required experience (maybe as list). - Qualifications: required qualifications list. - Skills: preferred qualifications list (or could be skills). We'll treat as Skills. - Benefits: benefits list. - Pay: pay range info. - Schedule: working conditions that relate to schedule: call-outs, overnight travel, etc. Also maybe include other working conditions? But schedule section should contain schedule-specific info. We'll include call-outs, overnight travel, etc. Could also include "Reliable attendance at work". That's schedule-ish. We must not include filler like "commensurate with experience". Not present. We must not include boilerplate like disclaimer. We must not repeat job title. Now produce HTML. We need to wrap each section:
About the role
then... maybe multiple paragraphs. For lists use
- .
We must not include any extra tags like or . Just fragment.
Let's craft.
About the role: combine company description and summary.
Company description paragraph: "Sunoco LP is a leading energy infrastructure and fuel distribution master limited partnership operating across 32 countries and territories in North America, the Greater Caribbean, and Europe. The Partnership’s midstream operations include an extensive network of approximately 14,000 miles of pipeline and over 160 terminals. This critical infrastructure complements the Partnership’s fuel distribution operations, which distribute over 15 billion gallons annually to approximately 11,000 Sunoco and partner-branded retail locations, as well as independent dealers and commercial customers. At Sunoco, we take great pride in what we do and wholeheartedly believe our employees drive success for our company and our customers. We are always looking for the best and brightest talent and we are committed to making your job a challenging and rewarding experience."
Then summary paragraph: "This position provides instrument and electrical technical support to construction, plant facilities and field operations. The position will repair, install, troubleshoot, and perform predictive and preventative maintenance tasks on control systems, natural gas compression or pump stations, SCADA, and other equipment contained within gas and liquid facilities and pipelines. Additionally, this position will inspect, troubleshoot, and maintain process control systems such as PLCs or DCS and other similar equipment."
We could combine into one
but better separate paragraphs. Responsibilities: list of duties. We'll produce
Responsibilities
- ... each duty. Make sure to keep the exact wording. Let's list duties exactly as in text: 1. Install, diagnose, and maintain SCADA systems, plant, pipeline, and compressor instrument and electrical equipment components with all job duties and responsibilities executed in a reliable and efficient manner while in compliance with the Partnership’s procedures and regulatory requirements. 2. Install, diagnose, and maintain pneumatic and intelligent instruments, electrical distribution systems, motor control gear, and associated equipment software 3. Install, diagnose, and maintain PLC's or DCS systems & process or safety controls 4. Read and interpret manuals, policy, engineering standards, regulations, drawings, and schematics, including electrical, pneumatic, and P&ID’s 5. Test, calibrate, and document plant and compressor station control and safety devices per DOT 192, DOT 193, DOT 195 or applicable PSM 1910 requirements and ensure frequencies of required preventative maintenance task are kept current 6. Participate in call out/on call requirements 7. Actively participate in partnership safety programs and initiatives 8. Provide specialized technical skills (i.e. develops complex design projects, cost estimates, evaluates electrical systems, build and maintain ESD systems, maintain gas turbine or skid unit control systems) 9. Provide work direction, oversight, and inspect other work provided by third party contractors 10. Provide mentoring and oversight to less qualified employees 11. Provide accurate written and electronic reporting 12. Comply with partnership safety policies and procedures 13. Perform energy isolation lockout/tagout procedures (LOTO) Check for any missing: The original also had "Provide specialized technical skills (i.e. develops complex design projects, cost estimates, evaluates electrical systems, build and maintain ESD systems, maintain gas turbine or sk