Fabricator I

Smeal, a REV Group brand, is a premier manufacturer, inventor, and innovator of custom fire apparatus, offering a full line of custom and commercial pumpers, rescue pumpers, aerial ladders, and urban interface vehicles. Based in Snyder, NE, Smeal sells its products worldwide and is part of Terex Corporation, a global designer and manufacturer of specialized vehicles and equipment.

Responsibilities

• Follow standard operating procedures as well as written and verbal orders and instructions in English.
• Perform all assigned tasks within specific time limits and company standards.
• Actively pursue cost reduction measures.
• Sand and grind welds and/or parts.
• Perform measuring and drilling.
• Identify and place parts in designated areas.
• Weld on a daily basis, including welding in small areas or in truck compartments.
• Learn to read and comprehend drawings, sketches, or verbal instructions to fabricate specialty items or make them to a specific fit.
• Learn to operate all related equipment pertaining to the position.
• Develop ability to MIG or TIG weld and other forms as a cross-training measure.
• Train new and existing employees.
• Share department and company knowledge as needed.
• Comply with all safety regulations regarding the work area, the product, and equipment; recognize and report all safety discrepancies to your supervisor.
• Perform other duties as assigned.

Requirements

• Lift up to 50 lbs. and be in good physical condition.
• Standing, bending, and climbing as well as upper body and back strength required.
• Follow all company policies and procedures, including wearing safety glasses, ear protection, and steel-toed shoes.
• Able to work in a noisy environment.
• Work overtime as needed.
• Must be able to read a tape measure.
• Willing to develop a thorough knowledge of all aspects of this field, including products, options, and uses.
• Willing to gain experience in all phases of the specific Fabrication area to which an individual is assigned.

Potential Hazards & Safety Measures

• Eye injuries & exposure to ultraviolet rays: Welding can cause damage to eyes. Required to wear an approved helmet with a lens tinted to 11 or darker per OSHA standards, or an electronic lens set to at least 11 when welding. Eye protection and face shield must be worn when sanding to prevent eye injury.
• Heat: Increased temperature due to heat reflection in compartments from welding. Wear PPE at all times.
• Cuts & burns: Use caution to prevent cuts when sanding and wear PPE when welding to protect against burns.
• Trips, slips, & falls: Ensure all air hoses and obstacles are kept clear of aisles. Use caution when climbing on and off trucks.
• Heavy lifting: Ask co-worker for help or use a crane or forklift operator when lifting objects over 50 lbs. Do not walk under suspended parts and be cautious of co-workers when operating cranes.
• Air quality: Wear respirator when in close quarters due to gases from welding, if needed.