Electronics Assembler (2nd Shift)

We need to output HTML fragment with sections: About the role (maybe Overview?), Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule. Only include sections that have real specific content. The posting includes Overview (we can treat as About the role). It lists essential functions (responsibilities). Basic qualifications (requirements). Desired qualifications (skills/qualifications). Benefits mention: "This position is eligible for Garmin's benefit program. Details can be found here: Garmin Benefits". That's a benefit mention but not detailed. According to rules: we should include Benefits section only if posting actually states them. It states eligibility and link; that's some content. We can include Benefits with that sentence. Pay and Schedule: not mentioned. So omit those sections. We must not repeat job title as heading. Use

for section headings. Use

• for any list of duties/requirements/benefits, and

  for prose. We need to preserve all substantive information; do not invent or summarize away detail. Remove boilerplate (EEO, etc). Also remove navigation/cookie etc. The posting includes "Garmin International is an equal opportunity employer..." and "This position is eligible for Garmin's benefit program..." The EEO line is boilerplate; we should remove it. The benefit line we keep. We need to include Overview as About the role? The instruction: use

  for section headings (e.g. About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule). So we can map Overview to About the role. Provide a

  About the role

  then a

  with overview text. Responsibilities: essential functions list. That's a long list of duties. We'll put them in

  • each bullet. Requirements: Basic Qualifications. Could be a list. Qualifications/Skills: Desired Qualifications. Could be combined as Qualifications or Skills. The instruction says we can have Qualifications and Skills sections. We have both basic qualifications (requirements) and desired qualifications (skills). We could put Basic Qualifications under Requirements, and Desired Qualifications under Skills or Qualifications. Since we already have Requirements for basic qualifications, we can put Desired Qualifications under Skills (or Qualifications). Let's decide: Use Requirements for basic qualifications, Skills for desired qualifications. Or we could have Qualifications for desired. But we need to avoid thin sections. We'll have Requirements (basic) and Skills (desired). Benefits section. We must not include headings with filler. Ensure we have substantive content. Now craft HTML. Overview text: "We are seeking a full-time Electronics Assembler (2nd Shift) at Garmin's U.S. headquarters in the Greater Kansas City area. In this role, you will be responsible for assembling electronic components, subassemblies and systems and testing electronic function of assemblies, components, subassemblies and systems using test equipment and procedures." We should not repeat job title as heading, but it's okay to include in paragraph. Now responsibilities: list each essential function sentence. There are many sentences. We'll break them into bullet points. Ensure we keep all details. Let's extract essential functions sentences (they are separated by line breaks? The text: "Essential Functions Read shop orders, follow production work instruction and sample assemblies, and receive verbal instructions regarding duties to be performedTrain other Garmin associates on task requirements and processesPosition and align parts in specified relationships to each other in jig, fixture or other holding device using hand or power tools and performance may include lifting up to 30 poundsTend machines or use hand tools and power tools to crimp, stake, bolt, rivet, weld, solder, cement, press fit or perform similar operation to secure parts in place which may include lifting up to 30 pounds and perform operator level preventive maintenance on machines, per Garmin requirementsMount assembled components such as transformers, resistors, capacitors, integrated circuits and sockets on chassis, panel or printed circuit boardConnect component lead wires to printed circuit or routes and connect wires between individual component leads and other components, connectors, terminals and contact points using soldering, welding, thermocompression or related bonding proceduresInstall finished assemblies or subassemblies in cases and cabinetsAssemble and attach functional and cosmetic hardware such as caps, clamps and knobs to assemblies using hand tools and power toolsPerform intermediate assembly tasks such as potting, encapsulating, cleaning, coating, epoxy bonding, curing, stamping and color-coding parts and assembliesTend machines which press or shape component parts and perform operator level preventive maintenance on machines which may include lifting up to 30 poundsTend automatic assembly equipment which joins components/parts and perform operator level preventive maintenance on machines which may include lifting up to 30 poundsOperate standard test equipment and conduct functional, operational, environmental and life tests on productConnect unit to test instrument (such as ohmmeter, voltmeter, ammeter, resistance bridge or oscilloscope) and turn switch Read instrument dial or scope that indicates resistance, capacitance, continuity and wave pattern or defect such as short or current leakage and compare instrument reading with standard and reject defective units and perform operator level preventive maintenance on test equipment, per GMP requirements, and record type and quantity of defectsNotify management of any conditions felt as being undesirable or nonconforming to product specification and any procedures that cannot be performed as documentedCompliance with HRD-003 (Garmin’s Attendance Policy)Compliance with DOT (Department of Transportation) requirementsCleanliness zone area requirements: This position requires Garmin provided personal protective equipment including SD shoes (Static Dissipative Footwear) to be always worn for an entire shift to minimize the risk of electrostatic discharge (ESD) and meet specified standardsMaintain acceptable organization and cleanliness in work areaIdentify and label Material Drops (for incoming material)Clear all unnecessary items regularlyIdentify all material properlyMaintain orderly work center condition at end of shift (ex. totes covered, work bench lights off, etc.)" We need to split into sensible bullet points. Could group similar tasks. But we must preserve all substantive information; we can break at each major verb phrase. Let's create bullet points: - Read shop orders, follow production work instructions and sample assemblies, and receive verbal instructions regarding duties to be performed. - Train other Garmin associates on task requirements and processes. - Position and align parts in specified relationships to each other in jig, fixture or other holding device using hand or power tools (may include lifting up to 30 pounds). - Tend machines or use hand tools and power tools to crimp, stake, bolt, rivet, weld, solder, cement, press fit or perform similar operation to secure parts in place (may include lifting up to 30 pounds); perform operator level preventive maintenance on machines per Garmin requirements. - Mount assembled components such as transformers, resistors, capacitors, integrated circuits and sockets on chassis, panel or printed circuit board. - Connect component lead wires to printed circuit or routes and connect wires between individual component leads and other components, connectors, terminals and contact points using soldering, welding, thermocompression or related bonding procedures. - Install finished assemblies or subassemblies in cases and cabinets. - Assemble and attach functional and cosmetic hardware such as caps, clamps and knobs to assemblies using hand tools and power tools. - Perform intermediate assembly tasks such as potting, encapsulating, cleaning, coating, epoxy bonding, curing, stamping and color-coding parts and assemblies. - Tend machines which press or shape component parts and perform operator level preventive maintenance on machines (may include lifting up to 30 pounds). - Tend automatic assembly equipment which joins components/parts and perform operator level preventive maintenance on machines (may include lifting up to 30 pounds). - Operate standard test equipment and conduct functional, operational, environmental and life tests on product. - Connect unit to test instrument (such as ohmmeter, voltmeter, ammeter, resistance bridge or oscilloscope) and turn switch; read instrument dial or scope that indicates resistance, capacitance, continuity and wave pattern or defect such as short or current leakage; compare instrument reading with standard and reject defective units; perform operator level preventive maintenance on test equipment per GMP requirements, and record type and quantity of defects. - Notify management of any conditions felt as being undesirable or nonconforming to product specification and any procedures that cannot be performed as documented. - Comply with HRD-003 (Garmin’s Attendance Policy). - Comply with DOT (Department of Transportation) requirements. - Adhere to cleanliness zone area requirements: wear Garmin-provided personal protective equipment including SD shoes (Static Dissipative Footwear) at all times during shift to minimize ESD risk and meet specified standards. - Maintain acceptable organization and cleanliness in work area. - Identify and label Material Drops (for incoming material). - Clear all unnecessary items regularly. - Identify all material properly. - Maintain orderly work center condition at end of shift (e.g., totes covered, work bench lights off, etc.). That seems comprehensive. Now Basic Qualifications list: - High School Diploma or GED - Demonstrated verbal, interpersonal, and written communication skills, to provide for respectful work-related communications with peers and associates from other departments (direct contact and use of electronic mail systems) - Must possess a high degree of dexterity and eye coordination, to allow manipulation of buttons, switches, hand tools and knobs on delicate equipment, products and parts, in the performance of essential functions - Associates operating machinery must have a mechanical aptitude with an attention to detail - Must possess the ability to bend, twist and lift up to 30 pounds while using safe lifting techniques, standing for an entire shift and walking long distances throughout the facility - This position will require the ability to sit, stand, look down, bend, twist and have dexterity with hands for up to 10 hours We'll put each as
  • . Desired Qualifications (Skills): - 2+ years assembly experience - Soldering skills (certificate desirable) - Previous experience in a manufacturing environment utilizing techniques to install Surface Mount Technology (SMT) and Through-hole Technology (THT) components - Previous knowledge/use of IPC-610, Acceptance of Electronic Assemblies, workmanship standards We'll put as
  • under Skills. Benefits: "This position is eligible for Garmin's benefit program. Details can be found here: Garmin Benefits" We'll put as

    maybe. Now ensure we don't include any boilerplate like EEO line. We removed. Now produce HTML fragment:

    About the role

    We are seeking a full-time Electronics Assembler (2nd Shift) at Garmin's U.S. headquarters in the Greater Kansas City area. In this role, you will be responsible for assembling electronic components, subassemblies and systems and testing electronic function of assemblies, components, subassemblies and systems using test equipment and procedures.

    Responsibilities

    • Read shop orders, follow production work instructions and sample assemblies, and receive verbal instructions regarding duties to be performed.
    • Train other Garmin associates on task requirements and processes.
    • Position and align parts in specified relationships to each other in jig, fixture or other holding device using hand or power tools (may include lifting up to 30 pounds).
    • Tend machines or use hand tools and power tools to crimp, stake, bolt, rivet, weld, solder, cement, press fit or perform similar operation to secure parts in place (may include lifting up to 30 pounds); perform operator level preventive maintenance on machines per Garmin requirements.
    • Mount assembled components such as transformers, resistors, capacitors, integrated circuits and sockets on chassis, panel or printed circuit board.
    • Connect component lead wires to printed circuit or routes and connect wires between individual component leads and other components, connectors, terminals and contact points using soldering, welding, thermocompression or related bonding procedures.
    • Install finished assemblies or subassemblies in cases and cabinets.
    • Assemble and attach functional and cosmetic hardware such as caps, clamps and knobs to assemblies using hand tools and power tools.
    • Perform intermediate assembly