Design Engineer
for sections like About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule. We must only include sections that have real specific content. The posting includes responsibilities, qualifications, skills/abilities, equipment knowledge, role requirements, etc. We need to map to headings.
We should not repeat job title. No Job ID. Remove boilerplate like "SAM123 Equal Opportunity and E-Verify Employer". Also remove duplicated lines.
We need to preserve all substantive info.
We need to decide sections: maybe "Responsibilities", "Qualifications", "Skills and Abilities", "Equipment Knowledge", "Role Requirements". Could also combine some.
We must not create Pay/Schedule/Benefits unless present. Not present.
We need to use - for any list of duties/requirements/benefits. Use
for prose.
We need to include headings only when there is real content.
Let's extract content.
From posting:
Essential Functions / Responsibilities:
- Develop engineered documents (drawings, calculations, weld maps, design checking, etc) that reflect the needs of the customer and comply with all applicable codes and specifications.
- Monitor and report status of project from inception to shipment and report any delays to the Lead Engineer.
- Communicate with the customer to resolve discrepancies in specifications and keep customer advised of project status.
- Coordinate (either directly or via the customer) the involvement of any necessary outside agencies and include receipt of any necessary document approvals, coordination of on-site inspection visits, etc.
- Assist Lead Engineer with special projects including Engineering process improvements, customer design services, etc.
Other Skills and Abilities:
- Welding: Must have a basic understanding of the welding processes utilized at Samuel. This would include application of processes, process characteristics, and representation of necessary welds with appropriate symbols.
- Materials: Must have knowledge of materials utilized. Selection of optimum materials, knowledge of material specifications and part numbers, and ability to accurately assign necessary materials to relevant engineering documents.
- Fabrication: A fundamental knowledge of Samuel’s fabrication methods is required. Basic capabilities and limitations of shop equipment should be utilized to determine to most effective means of product fabrication.
- Code Requirements: Must be able to accurately interpret and comply with ASME code along with a wide variety of customer and outside agency specifications.
- Computer Knowledge: Must be fluent with basic operation of word processing and spreadsheet programs.
- Calculations: Must have basic knowledge of statics and be able to complete appropriate design calculations. Must become proficient with the use of pressure vessel calculation software.
Equipment Knowledge:
- Must have proficient knowledge of CAD.
- Microsoft Office Applications
- IFS or similar ERP system
- Must have basic understanding of shop equipment and machinery capabilities.
Role Requirements:
- Ability to work in a fast-paced environment to meet team expectations.
- Understanding and support of company policies and procedures.
- Ability to understand and abide by all safety rules and regulations to perform the job.
- Must be able to read blueprints.
- Bachelor’s Degree in Engineering or related field or Associates Degree in Mechanical field and 7-10 years related experience.
Then later there is a paragraph: "Develop engineered documents that accurately reflect the product needs of the customer as well as any third-party organizations. The Design Engineer will be involved with products outside the scope of normal customer requirements and will act as a liaison between necessary Samuel departments and personnel to ensure all facets of such projects are coordinated and completed in a timely and accurate manner."
Then RESPONSIBILITIES (again):
- Develop engineered documents (drawings, calculations, bills of materials, routings, etc) that reflect the needs of the customer and comply with all applicable codes and specifications.
- Monitor and report status of project from inception to shipment and report any delays to the Engineering Manager.
- Communicate with the customer to resolve discrepancies in specifications and keep customer advised of project status.
- Coordinate (either directly or via the customer) the involvement of any necessary outside agencies and include receipt of any necessary document approvals, coordination of on-site inspection visits, etc.
- Assist Engineering Manager with special projects including Engineering process improvements, customer design services, etc.
QUALIFICATIONS:
- Bachelor’s Degree in Engineering or related field or Associates Degree in Mechanical field and 7-10 years related experience.
- Must have proficient knowledge of CAD (AutoDesk Inventor preferred).
- Must be able to accurately interpret and comply with ASME code along with a wide variety of customer and outside agency specifications.
- Must have basic knowledge of statics and be able to complete appropriate design calculations. Must become proficient with the use of pressure vessel calculation software.
- Experience with IFS or similar ERP system
- Must have basic understanding of shop equipment and machinery capabilities.
- Welding: Must have a basic understanding of the welding processes.This would include application of processes, process characteristics, and representation of necessary welds with appropriate symbols.
- Materials: Must have knowledge of materials utilized. Selection of optimum materials, knowledge of material specifications and part numbers, and ability to accurately assign necessary materials to relevant engineering documents.
- Fabrication: A fundamental knowledge of fabrication methods is required. Basic capabilities and limitations of shop equipment should be utilized to determine to most effective means of product fabrication.
We need to combine duplicates and preserve all info.
We need to output HTML fragment.
Let's decide sections:
- About the role (maybe a prose paragraph summarizing role). We have a paragraph: "Develop engineered documents that accurately reflect the product needs of the customer as well as any third-party organizations. The Design Engineer will be involved with products outside the scope of normal customer requirements and will act as a liaison between necessary Samuel departments and personnel to ensure all facets of such projects are coordinated and completed in a timely and accurate manner." That's substantive. So we can have
About the role
...
- Responsibilities: combine both lists (Essential Functions/Responsibilities and later RESPONSIBILITIES). They are similar but some differences: first list mentions Lead Engineer, second mentions Engineering Manager. Also first list includes "Develop engineered documents (drawings, calculations, weld maps, design checking, etc)" second list includes "Develop engineered documents (drawings, calculations, bills of materials, routings, etc)". We need to preserve all specifics. So we can merge items, but ensure we don't lose any detail. Could list all unique items.
Let's list all responsibility bullets:
From first list:
1. Develop engineered documents (drawings, calculations, weld maps, design checking, etc) that reflect the needs of the customer and comply with all applicable codes and specifications.
2. Monitor and report status of project from inception to shipment and report any delays to the Lead Engineer.
3. Communicate with the customer to resolve discrepancies in specifications and keep customer advised of project status.
4. Coordinate (either directly or via the customer) the involvement of any necessary outside agencies and include receipt of any necessary document approvals, coordination of on-site inspection visits, etc.
5. Assist Lead Engineer with special projects including Engineering process improvements, customer design services, etc.
From second list:
1. Develop engineered documents (drawings, calculations, bills of materials, routings, etc) that reflect the needs of the customer and comply with all applicable codes and specifications.
2. Monitor and report status of project from inception to shipment and report any delays to the Engineering Manager.
3. Communicate with the customer to resolve discrepancies in specifications and keep customer advised of project status.
4. Coordinate (either directly or via the customer) the involvement of any necessary outside agencies and include receipt of any necessary document approvals, coordination of on-site inspection visits, etc.
5. Assist Engineering Manager with special projects including Engineering process improvements, customer design services, etc.
Differences: first mentions Lead Engineer, second mentions Engineering Manager; first includes weld maps, design checking; second includes bills of materials, routings. Both have similar other items.
We should keep both variations. Could combine as two separate bullet points for each variation? But we need to preserve all substantive info. Could list both bullet points separately, maybe like:
- Develop engineered documents (drawings, calculations, weld maps, design checking, etc) that reflect the needs of the customer and comply with all applicable codes and specifications.
- Develop engineered documents (drawings, calculations, bills of materials, routings, etc) that reflect the needs of the customer and comply with all applicable codes and specifications.
- Monitor and report status of project from inception to shipment and report any delays to the Lead Engineer.
- Monitor and report status of project from inception to shipment and report any delays to the Engineering Manager.
- Communicate with the customer to resolve discrepancies in specifications and keep customer advised of project status.
- Coordinate (either directly or via the customer) the involvement of any necessary outside agencies and include receipt of any necessary document approvals, coordination of on-site inspection visits, etc.
- Assist Lead Engineer with special projects including Engineering process improvements, customer design services, etc.
- Assist Engineering Manager with special projects including Engineering process improvements, customer design services, etc.
But note the communication and coordination bullets are identical; we could keep one but it's okay to keep duplicate? The instruction: "Preserve ALL substantive information; do NOT invent or summarize away detail." Duplicates are not invented; they are present in source. Keeping duplicate is okay but maybe we should deduplicate to avoid redundancy? The instruction says do not summarize away detail, but duplicates are detail; removing them could be considered summarizing away detail? However duplicates are same detail repeated; removing one does not lose info because the info is still present. It's ambiguous. Safer to keep both? But that would be redundant and maybe considered filler? The instruction: "Remove cookie/navigation/legal/EEO/equal-opportunity/scam-warning boilerplate, duplicated lines, and application instructions." It says remove duplicated lines. So we should remove duplicated lines. So we should deduplicate identical lines. So we keep one instance of each unique responsibility.
Thus we need to keep unique responsibility statements.
Let's list unique responsibilities:
- Develop engineered documents (drawings, calculations, weld maps, design checking, etc) that reflect the needs of the customer and comply with all applicable codes and specifications.
- Develop engineered documents (drawings, calculations, bills of materials, routings, etc) that reflect the needs of the customer and comply with all applicable codes and specifications.
- Monitor and report status of project from inception to shipment and report any delays to the Lead Engineer.
- Monitor and report status of project from inception to shipment and report any delays to the Engineering Manager.
- Communicate with the customer to resolve discrepancies in specifications and keep customer advised of project status.
- Coordinate (either directly or via the customer) the involvement of any necessary outside agencies and include receipt of any necessary document approvals, coordination of on-site inspection visits, etc.
- Assist Lead Engineer with special projects including Engineering process improvements, customer design services, etc.
- Assist Engineering Manager with special projects including Engineering process improvements, customer design services, etc.
Now note that "Monitor and report status..." two variants differ only in Lead Engineer vs Engineering Manager. Both are unique, keep both.
Similarly Assist Lead Engineer vs Assist Engineering Manager.
Now we have 8 bullets.
Now Qualifications section: we have qualifications list from later QUALIFICATIONS and also from ROLE REQUIREMENTS (which includes education/experience). Also there is a line "Bachelor’s Degree in Engineering or related field or Associates Degree in Mechanical field and 7-10 years related experience." appears in both.
We need to combine qualifications and role requirements maybe under a single heading "Qualifications" or "Requirements". The instruction says use headings like Requirements, Qualifications, Skills, Benefits, Pay, Schedule. We can choose to have a "Qualifications" section for education/experience and technical qualifications, and a "Skills" section for skills and abilities (welding, materials, fabrication, code requirements, computer knowledge, calculations, equipment knowledge). Or we could combine.
Let's extract qualifications:
From ROLE REQUIREMENTS:
- Ability to work in a fast-paced environment to meet team expectations.
- Understanding and support of company policies and procedures.
- Ability to understand and abide by all safety rules and regulations to perform the job.
- Must be able to read blueprints.
- Bachelor’s Degree in Engineering or related field or Associates Degree
for prose. We need to include headings only when there is real content. Let's extract content. From posting: Essential Functions / Responsibilities: - Develop engineered documents (drawings, calculations, weld maps, design checking, etc) that reflect the needs of the customer and comply with all applicable codes and specifications. - Monitor and report status of project from inception to shipment and report any delays to the Lead Engineer. - Communicate with the customer to resolve discrepancies in specifications and keep customer advised of project status. - Coordinate (either directly or via the customer) the involvement of any necessary outside agencies and include receipt of any necessary document approvals, coordination of on-site inspection visits, etc. - Assist Lead Engineer with special projects including Engineering process improvements, customer design services, etc. Other Skills and Abilities: - Welding: Must have a basic understanding of the welding processes utilized at Samuel. This would include application of processes, process characteristics, and representation of necessary welds with appropriate symbols. - Materials: Must have knowledge of materials utilized. Selection of optimum materials, knowledge of material specifications and part numbers, and ability to accurately assign necessary materials to relevant engineering documents. - Fabrication: A fundamental knowledge of Samuel’s fabrication methods is required. Basic capabilities and limitations of shop equipment should be utilized to determine to most effective means of product fabrication. - Code Requirements: Must be able to accurately interpret and comply with ASME code along with a wide variety of customer and outside agency specifications. - Computer Knowledge: Must be fluent with basic operation of word processing and spreadsheet programs. - Calculations: Must have basic knowledge of statics and be able to complete appropriate design calculations. Must become proficient with the use of pressure vessel calculation software. Equipment Knowledge: - Must have proficient knowledge of CAD. - Microsoft Office Applications - IFS or similar ERP system - Must have basic understanding of shop equipment and machinery capabilities. Role Requirements: - Ability to work in a fast-paced environment to meet team expectations. - Understanding and support of company policies and procedures. - Ability to understand and abide by all safety rules and regulations to perform the job. - Must be able to read blueprints. - Bachelor’s Degree in Engineering or related field or Associates Degree in Mechanical field and 7-10 years related experience. Then later there is a paragraph: "Develop engineered documents that accurately reflect the product needs of the customer as well as any third-party organizations. The Design Engineer will be involved with products outside the scope of normal customer requirements and will act as a liaison between necessary Samuel departments and personnel to ensure all facets of such projects are coordinated and completed in a timely and accurate manner." Then RESPONSIBILITIES (again): - Develop engineered documents (drawings, calculations, bills of materials, routings, etc) that reflect the needs of the customer and comply with all applicable codes and specifications. - Monitor and report status of project from inception to shipment and report any delays to the Engineering Manager. - Communicate with the customer to resolve discrepancies in specifications and keep customer advised of project status. - Coordinate (either directly or via the customer) the involvement of any necessary outside agencies and include receipt of any necessary document approvals, coordination of on-site inspection visits, etc. - Assist Engineering Manager with special projects including Engineering process improvements, customer design services, etc. QUALIFICATIONS: - Bachelor’s Degree in Engineering or related field or Associates Degree in Mechanical field and 7-10 years related experience. - Must have proficient knowledge of CAD (AutoDesk Inventor preferred). - Must be able to accurately interpret and comply with ASME code along with a wide variety of customer and outside agency specifications. - Must have basic knowledge of statics and be able to complete appropriate design calculations. Must become proficient with the use of pressure vessel calculation software. - Experience with IFS or similar ERP system - Must have basic understanding of shop equipment and machinery capabilities. - Welding: Must have a basic understanding of the welding processes.This would include application of processes, process characteristics, and representation of necessary welds with appropriate symbols. - Materials: Must have knowledge of materials utilized. Selection of optimum materials, knowledge of material specifications and part numbers, and ability to accurately assign necessary materials to relevant engineering documents. - Fabrication: A fundamental knowledge of fabrication methods is required. Basic capabilities and limitations of shop equipment should be utilized to determine to most effective means of product fabrication. We need to combine duplicates and preserve all info. We need to output HTML fragment. Let's decide sections: - About the role (maybe a prose paragraph summarizing role). We have a paragraph: "Develop engineered documents that accurately reflect the product needs of the customer as well as any third-party organizations. The Design Engineer will be involved with products outside the scope of normal customer requirements and will act as a liaison between necessary Samuel departments and personnel to ensure all facets of such projects are coordinated and completed in a timely and accurate manner." That's substantive. So we can have
About the role
...
- Responsibilities: combine both lists (Essential Functions/Responsibilities and later RESPONSIBILITIES). They are similar but some differences: first list mentions Lead Engineer, second mentions Engineering Manager. Also first list includes "Develop engineered documents (drawings, calculations, weld maps, design checking, etc)" second list includes "Develop engineered documents (drawings, calculations, bills of materials, routings, etc)". We need to preserve all specifics. So we can merge items, but ensure we don't lose any detail. Could list all unique items. Let's list all responsibility bullets: From first list: 1. Develop engineered documents (drawings, calculations, weld maps, design checking, etc) that reflect the needs of the customer and comply with all applicable codes and specifications. 2. Monitor and report status of project from inception to shipment and report any delays to the Lead Engineer. 3. Communicate with the customer to resolve discrepancies in specifications and keep customer advised of project status. 4. Coordinate (either directly or via the customer) the involvement of any necessary outside agencies and include receipt of any necessary document approvals, coordination of on-site inspection visits, etc. 5. Assist Lead Engineer with special projects including Engineering process improvements, customer design services, etc. From second list: 1. Develop engineered documents (drawings, calculations, bills of materials, routings, etc) that reflect the needs of the customer and comply with all applicable codes and specifications. 2. Monitor and report status of project from inception to shipment and report any delays to the Engineering Manager. 3. Communicate with the customer to resolve discrepancies in specifications and keep customer advised of project status. 4. Coordinate (either directly or via the customer) the involvement of any necessary outside agencies and include receipt of any necessary document approvals, coordination of on-site inspection visits, etc. 5. Assist Engineering Manager with special projects including Engineering process improvements, customer design services, etc. Differences: first mentions Lead Engineer, second mentions Engineering Manager; first includes weld maps, design checking; second includes bills of materials, routings. Both have similar other items. We should keep both variations. Could combine as two separate bullet points for each variation? But we need to preserve all substantive info. Could list both bullet points separately, maybe like: - Develop engineered documents (drawings, calculations, weld maps, design checking, etc) that reflect the needs of the customer and comply with all applicable codes and specifications. - Develop engineered documents (drawings, calculations, bills of materials, routings, etc) that reflect the needs of the customer and comply with all applicable codes and specifications. - Monitor and report status of project from inception to shipment and report any delays to the Lead Engineer. - Monitor and report status of project from inception to shipment and report any delays to the Engineering Manager. - Communicate with the customer to resolve discrepancies in specifications and keep customer advised of project status. - Coordinate (either directly or via the customer) the involvement of any necessary outside agencies and include receipt of any necessary document approvals, coordination of on-site inspection visits, etc. - Assist Lead Engineer with special projects including Engineering process improvements, customer design services, etc. - Assist Engineering Manager with special projects including Engineering process improvements, customer design services, etc. But note the communication and coordination bullets are identical; we could keep one but it's okay to keep duplicate? The instruction: "Preserve ALL substantive information; do NOT invent or summarize away detail." Duplicates are not invented; they are present in source. Keeping duplicate is okay but maybe we should deduplicate to avoid redundancy? The instruction says do not summarize away detail, but duplicates are detail; removing them could be considered summarizing away detail? However duplicates are same detail repeated; removing one does not lose info because the info is still present. It's ambiguous. Safer to keep both? But that would be redundant and maybe considered filler? The instruction: "Remove cookie/navigation/legal/EEO/equal-opportunity/scam-warning boilerplate, duplicated lines, and application instructions." It says remove duplicated lines. So we should remove duplicated lines. So we should deduplicate identical lines. So we keep one instance of each unique responsibility. Thus we need to keep unique responsibility statements. Let's list unique responsibilities: - Develop engineered documents (drawings, calculations, weld maps, design checking, etc) that reflect the needs of the customer and comply with all applicable codes and specifications. - Develop engineered documents (drawings, calculations, bills of materials, routings, etc) that reflect the needs of the customer and comply with all applicable codes and specifications. - Monitor and report status of project from inception to shipment and report any delays to the Lead Engineer. - Monitor and report status of project from inception to shipment and report any delays to the Engineering Manager. - Communicate with the customer to resolve discrepancies in specifications and keep customer advised of project status. - Coordinate (either directly or via the customer) the involvement of any necessary outside agencies and include receipt of any necessary document approvals, coordination of on-site inspection visits, etc. - Assist Lead Engineer with special projects including Engineering process improvements, customer design services, etc. - Assist Engineering Manager with special projects including Engineering process improvements, customer design services, etc. Now note that "Monitor and report status..." two variants differ only in Lead Engineer vs Engineering Manager. Both are unique, keep both. Similarly Assist Lead Engineer vs Assist Engineering Manager. Now we have 8 bullets. Now Qualifications section: we have qualifications list from later QUALIFICATIONS and also from ROLE REQUIREMENTS (which includes education/experience). Also there is a line "Bachelor’s Degree in Engineering or related field or Associates Degree in Mechanical field and 7-10 years related experience." appears in both. We need to combine qualifications and role requirements maybe under a single heading "Qualifications" or "Requirements". The instruction says use headings like Requirements, Qualifications, Skills, Benefits, Pay, Schedule. We can choose to have a "Qualifications" section for education/experience and technical qualifications, and a "Skills" section for skills and abilities (welding, materials, fabrication, code requirements, computer knowledge, calculations, equipment knowledge). Or we could combine. Let's extract qualifications: From ROLE REQUIREMENTS: - Ability to work in a fast-paced environment to meet team expectations. - Understanding and support of company policies and procedures. - Ability to understand and abide by all safety rules and regulations to perform the job. - Must be able to read blueprints. - Bachelor’s Degree in Engineering or related field or Associates Degree