Civil Journeyman (RAL GTECH BB)

About the Role

Southern Industrial is seeking a Civil Journeyman for a project in New Hill, NC. Benefits and Paid Time Off are available after a 3-month employment period.

Responsibilities

• Establish building lines and control points from construction drawings.
• Construct formwork and grade rod vertically and horizontally in proper alignments.
• Create control joints, molds expansion joints, and edges using a concrete saw, edging tools, jointers, and straight edge.
• Install reinforcing steel and embeds according to construction drawings.
• Tie rebar, wire mesh, and all support structures.
• Place concrete from a chute, Georgia buggy, or a pump.
• Spread concrete to specified depth and workable consistency, using float to bring water to surface and produce soft topping.
• Level, smooth, and shape surfaces of freshly poured concrete, using straightedge and float or power screed.
• Finish flat and sloped concrete surfaces, using power trowel, or wet and rub concrete with abrasive stone to impart finish.
• Operate soil compaction equipment and concrete vibrator.
• Remove rough or defective spots from concrete surfaces, using power grinder or chisel and hammer, and patch holes with fresh concrete or epoxy compound.
• Apply concrete surface treatments, curing compounds, and coatings.
• Direct subgrade work, mixing of concrete, and setting of forms.
• Follow set procedures and standards.
• Rate information using standards that can be measured or checked.
• Detect, recognize, and respond to dangerous conditions or situations.
• Regular attendance is required.
• Significant travel may be required.
• Perform other duties as required.

Requirements

• Skilled in both written and verbal communication.
• Complete all Safety and general job training as required by Southern Industrial.
• Observe Southern Industrial and Customer safety and quality processes and procedures at all times.

Physical Demands

• Must be able to effectively use all required PPE equipment and lift up to fifty pounds.
• Must be able to safely access all areas of property, buildings, structures, wharves, rooftops, and other elevated positions, as well as confined spaces.
• Strenuous physical demands are required to safely perform the essential functions associated with this position.
• Must be able to safely operate all involved equipment and tools.
• Must be capable of standing for long periods of time, bending consistently, working in confined spaces with limited access, on ladders, in personnel lifts, in workboats, and working in awkward body positions.

Work Environment

Conditions include working in office, shop, busy traffic areas, warehouses, and undeveloped properties, with frequent exposure to dirt, dust, grease, oil, vibrations, and adverse weather conditions.