Technician 3 Reject Repair- 1st Shift

Responsibilities

• Disassemble failed transmissions to determine root cause of failure and rework as required.
• Identify assembly errors and make suggestions to improve the process.
• Operate air impact guns and assorted hand tools to remove and install bolts, snap rings, screws, rivets, or other fasteners to remove or attach parts or subassemblies.
• Inspect parts and subassemblies for obvious defects, misbuilt, or omitted parts; scrap defective parts.
• Clean and perform operator maintenance on assigned equipment.
• Adhere to the policies, procedures, and instructions of the QS 9000 and ISO 14001 systems.

Requirements

• Ability to comprehend technical information, read, and write legibly.
• Willingness to pursue technical schooling in a timely manner to fulfill job requirements.
• Ability to learn the operation of the test stand.

Physical Demands

The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities.

• Frequently required to stand; use hands to finger, handle, or feel objects, tools, or controls; and reach with hands and arms.
• Frequently required to grip a minimum of 80 pounds.
• Occasionally required to walk; stoop; kneel; crouch; and talk or hear.
• Must frequently lift and/or move up to 50 pounds.
• Specific vision abilities required include close vision, color vision, and depth perception.

Work Environment

The work environment characteristics described here are representative of those encountered while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities.

• Occasionally works near moving mechanical parts.
• Regularly exposed to fumes or airborne particles.
• Moderate noise level in the work environment.

Tools and Equipment

• Air impact gun
• Air gun
• Air nozzle
• Assorted hand tools
• Manual press
• Go/no-go gauges

Materials

• Transmission parts
• Transmission fluid
• Sharpening stone

Detailed Work Instructions are located at each subassembly and final assembly workstation.