Stabi-4 Machine Operator - 3rd Shift (13506)

Sets up and operates both automatic and manual assembly lines, assembles parts to specifications.

Responsibilities

• Safety
  • Maintain and provide a safe work area and work in a safe manner.
  • Report any unsafe conditions to Team Leader immediately.
• Quality
  • Complete Hourly checks using In Process Check Sheets and Gaging to ensure parts meet Quality Specifications.
  • Notifies Team Leader of any suspect material and helps to contain material line side.
• Changeovers
  • Complete changeovers using Changeover Procedure.
  • Attach fixtures and jigs to the table positions according to changeover procedure.
  • Change out Station changeover pieces according to changeover procedure.
  • Fill in Changeover checklist to ensure all changeover steps are complete.
• Operation
  • Completes standardized work in accordance to Work Instructions.
  • Removes material from boxes and places in fixture or on conveyor.
  • Moves parts from machine to machine as process is completed, i.e. Bolt Press to Pre-Assembly to Final Assembly.
  • Observes and listens to machine operation to detect malfunctions, such as worn rolling heads.
  • Measures and inspects parts for conformance to specifications, using in process sheets, visual checks and gaging.
  • Notify Team Leader of any abnormal or unusual condition.
  • Complete line PM’s (planned maintenance) as assigned.
  • Submit kaizen suggestions for improvements.

Requirements

• High School diploma or general education degree (GED).
• Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedures.
• Ability to effectively present information in one-on-one and small group situations to other employees of the organization.
• Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
• Ability to compute rate, ratio, and percent and to draw and interpret bar graphs and Statistical Process Control (SPC) charts.
• Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form.
• Ability to deal with problems involving several concrete variables in standardized situations.

Physical Demands

• Regularly required to stand eight (8) or more hours a day; walk; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear.
• Occasionally required to climb or balance and stoop, kneel, crouch, or crawl.
• Must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds.
• Specific vision abilities required include:
  • Close vision (20/40 near vision, can be with correction).
  • Distance vision (20/40 far vision, can be with correction).
  • Color vision (red/green, blue/violet, and silver/gold discrimination).
  • Depth perception (accurate depth perception required).
  • Peripheral vision (minimum 160 degrees).
  • Able to adjust focus.

Work Environment

• Regularly exposed to moving mechanical parts.
• The noise level in the work environment is usually moderate.