Sheetmetal - Journey Main 1 Supervisor 2

About the role

Vigor Marine Group is an established, innovative, integrated partner with a national footprint in marine maintenance and modernization, marine fabrication, and marine services. With four shipyards, six dry docks, and more than 20,000 feet of pier space on or near U.S. Naval bases and at historic shipyards, our 2,500 dedicated employees across four states – from the Pacific Northwest to San Diego to Norfolk – personify the values of our company. Vigor Marine Group takes pride in being the employer of choice for our employees, who in turn take great pride in their contributions to the communities where they live and work, and to their nation – through their living wage jobs supporting their local economies, and through the world-class maritime and industrial services they provide to further our defense readiness and national security.

Responsibilities

• Complies with craft and shipyard safety and environmental measures.
• Removes miscellaneous duct work, sheeting, locker, furniture, etc., from various locations of vessels or shipyard sites and rebuilds and/or reinstalls by welding and fitting techniques.
• Fabricates basic sheet metal projects to industrial customer specifications.
• Visualizes a completed job from start to finish.
• Uses blueprints in accomplishing work projects.
• Performs basic layout (i.e., on center square to round, round elbow, funnel, etc.).
• Fabricates duct work on and off the ship.
• Removes and installs duct work.
• Performs basic welding – stick, MIG, and TIG.
• Recognizes materials (e.g., stainless steel, aluminum, etc.) and determines gauge.
• Successfully completes sustained work at various heights, including, but not limited to 100 feet.
• Uses a tape measure.
• Works within a confined space, climbs ladders, and performs work in overhead positions.
• Properly cares for and safely uses hand and power tools and all company property.
• Performs assembly work associated with the sheet metal trade.
• Installs duct work, galley equipment, ceiling panels, etc.
• Directs daily activities of a crew of Sheet Metal Workers assigning work to effectively meet demanding production goals; creates a positive team working environment; provides guidance in the use of various machining techniques; counsels employees and provides corrective action as necessary.
• Reads and understands basic work specifications, blueprints, and schematics.
• Performs basic drawing and fabrication of sheet metal.
• Works with project team to meet their needs.
• Communicates with layout department to have fittings sent to the plasma.

Requirements

• High School diploma or GED preferred.
• 8 years relevant work experience in the sheet metal trade. Proven skills, work history, and/or applicable education will be considered in lieu of work experience.
• Ability to communicate effectively, work independently or in a group.
• Ability to do basic math, i.e., add, subtract, divide, and multiply.
• Ability to read, write, speak, and comprehend English.
• Ability to use basic geometry and trigonometry.
• Ability to use shop equipment – press, shear, hand break, roll, Pittsburgh, drill press, spot welder, etc.

Skills

• Basic welding – stick, MIG, and TIG.
• Recognizing materials (e.g., stainless steel, aluminum) and determining gauge.
• Reading and interpreting blueprints.
• Performing layout tasks (e.g., on center square to round, round elbow, funnel).
• Fabricating and installing duct work.
• Using hand and power tools safely and effectively.

Pay

Hourly rate: $45.29

Benefits

At Vigor, our unions offer a generous benefits package that may include:

• Medical
• Prescription (RX)
• Dental
• 401(k)
• Life Insurance
• Accidental Death & Dismemberment (AD&D)
• Pension
• Employee Assistance Program (EAP)
• Paid Time Off (PTO)
• Paid Holidays

Physical Demands

• Sitting: Occasionally sits for 1 hour at a time, up to 8 hours per day, while welding. Sits on all types of surfaces. May adjust position.
• Standing: Frequently stands while performing work at various tooling machines. May stand up to 2 hours uninterrupted, up to 8 hours per day. Stands on level or graded surfaces of concrete or steel.
• Walking: Frequently walks a maximum of 3,000 feet uninterrupted, 2 times per day. Walks short distances between jobs on ship, while transporting materials to and from various job sites. Walks on level and graded surfaces and must walk around obstacles. Walks on concrete or steel surface.
• Crouching: Occasionally crouches up to 15 minutes at a time, up to 10 times per day, while measuring, fabricating, and installing metal projects in the shop and on-board ship.
• Kneeling/Crawling: Occasionally crawls up to 10 feet, up to 10 times per day, in order to access specific job sites. May kneel on 1 or both knees, depending upon location of work site. Kneels up to 15 minutes at a time, up to 8 hours per day total.
• Stooping: Occasionally stoops while measuring, fabricating, and installing sheet metal projects in shop and aboard ship. May stoop for up to 15 minutes at a time, up to 2-1/2 hours per day. May stoop while operating various types of equipment.
• Twisting Knees: Occasionally twists at knees to access areas throughout the day.
• Waist-Twists: Twists dozens of times per day at waist while moving sheet metal work in process between machines.
• Neck: Occasionally twists neck in all positions while observing machining work and conducting measurements. Could hold position for 30 minutes at a time.
• Climbing: Occasionally climbs 30-foot ladders to 100 feet in height total. Climbs stairs when going aboard ship and accessing various areas of the ship.
• Balancing: Occasionally needs balance while climbing stairs/ladders aboard ship and while performing installation projects while working from a ladder, or on platforms.
• Leg/Foot Use: Occasionally while operating welding equipment.
• Reaching: Overhead continually. Performs installation work overhead while standing on ladder or while on level concrete surface. Has arms overhead for as much as 6 hours per day.
• Extension: Continually extends arms while operating equipment, manipulating material, performing installation projects, up to 6 hours/day.
• Handling/Grasping: Continuously holding and operating tools and equipment while moving metal sheets through machines for fabrication, and while performing installation. Removes and tightens bolts 50 to 100 times/day.
• Pushing/Pulling: Occasionally pushes individual metal sheets through equipment. Sheets may require up to 25 pounds of force. May push with up to 50 pounds force while conducting various stages of fabrication process.
• Lifting/Carrying: Carries up to 25 pounds occasionally when moving toolboxes, lifting individual sheets of metal, and carrying finished product. May lift up to 100 pounds of duct work from ground level to any height. May need to carry this much weight a distance of 40 feet, 5 to 10 times/day. Maximum weight expected to lift individually - 75 pounds.
• Other physical demands: Occasionally uses scissors for cutting and trimming sheet metal, up to 2 hours/day.

Essential Use of Senses

• Talking: Occasionally talks in person or on telephone/radio with other workers to coordinate work effort and ensure safety.
• Hearing: Occasionally talks with other co-workers in person or on the telephone/radio to coordinate work effort and ensure safety.
• Vision: Continually needed while performing work.
• Near Acuity: Performs precise work requiring near acuity for measurement.
• Far Acuity: Must be able to observe surrounding areas for safety reasons.
• Depth Perception: Must be able to judge distances/spatial relationships because of heavy equipment and to move safely about on-board ship.
• Field of Vision: Must have adequate field of vision to safely observe surrounding area.

Work Environment

• Frequently works indoors in either a ship or workshop setting, and is exposed to noise, heat, cold, and dust.
• Frequently exposed to outdoor weather while moving between shipyard and shop and while performing work on outdoor areas.
• Safety equipment required: Hard hat, welding helmet, safety glasses, hearing protection.
• Other Exposures: Noise, dust, fumes. Heavy lifting is occasionally part of the job.
• Operation of equipment/tools/vehicles: Uses shear, hand brake, pan brake, welding equipment, turning/burring machines, punches, grinder, drills, unishears, forming rolls, hand/power tools, sawsalls, come-a-longs, torches, heliarc.

This role is with a federally contracted employer and is subject to regulations that restrict employment to US Persons only (i.e., US Citizens, lawful permanent residents, legally recognized asylees and refugees, and persons protected under INA). Successful job candidates will be asked to provide documentation of their US Persons status.