Jobs · Engineering · Texas

P&C Technician

American Electric Power · Laredo, TX · 2 wk ago
On-siteEngineering$34.96–$43.11/hrFull-time

About the role

Perform work associated with the installation, operation, testing and maintenance of all protection and control devices and related equipment under direct, immediate or general supervision. Such devices and equipment includes but is not limited to digital relays, electromechanical relays, intelligent electronic devices, Station Disturbance Recorders (SDR), digital fault recorders (DFR), oscillographs and event recorders, RTU's and station SCADA systems, statistical load metering, telemetering and transducers. Additionally, install, maintain and operate all power line carriers (PLC), tone, pilot wire, fiber and associated P&C communications equipment. Respond to emergency call-outs and coordinate prompt restoration of service to customers as required. This list is not intended to limit assignment of work or the degree of supervision under all operating conditions. Employee may perform miscellaneous, related, and incidental work in addition to that specifically outlined below.

Supervision levels: Direct Supervision – qualified person working hands-on with the person performing the task. Immediate Supervision – qualified person near the structure/equipment in constant visual and/or verbal contact. General Supervision – employee of equal or higher classification knowledgeable of the task, not necessarily at the job site. A Qualified Person is a P&C Technician or Supervisor knowledgeable of the task, capable of performing appropriate emergency rescue.

Responsibilities

  • Assist in the performance of acceptance and installation tests on protection, control, and measurement devices and associated equipment in stations.
  • Assist in the installation, maintenance, and operation of all power line carriers, station SCADA, and associated communications equipment or cables as assigned.
  • Perform switching under direct supervision of qualified personnel following direction of the proper operating authority.
  • Assist in the installation, maintenance, and operation of any new and added equipment or systems as assigned.
  • Maintain test equipment and automotive equipment in good working order so that work can be performed safely and efficiently anywhere throughout the System.
  • Prepare and maintain accurate records, reports and drawings as required.
  • Assist employees of equal or higher classification.
  • Perform all duties in accordance with the Company's safety rules and operating regulations, NERC and environmental compliance, and practices.
  • Perform similar or less skilled work as assigned.
  • Test protection & control devices and equipment periodically and as required.
  • Calibrate protection & control devices and equipment on a pre-established schedule and as required.
  • Assist with diagnosis of trouble, mis-operation, or damage of equipment and assist with corrective action to affect repair and prevent recurrence.
  • Operate a computer device to test, calibrate, and retrieve data from protection & control devices.

Requirements

  • Education: Associate's degree in electrical engineering technology, electronic technology, or related technology field; or equivalent education and/or experience (limited to military training and work experience of technical/technician nature such as aviation and nuclear instrumentation technician). Equivalent determined by hiring manager.
  • Work Experience: No previous work experience required.
  • Must satisfactorily complete, within established time frames, qualifications necessary to perform duties of the next higher classification in the line of progression (P&C Technician Sr) or vacate current classification.
  • Must have the ability and desire to acquire knowledge and skills to perform duties of the key job (P&C Technician Sr) and be qualified through demonstration, examination, and/or performance appraisal as determined by the Company.
  • Must possess and maintain a valid state driver's license and meet all vehicle operation requirements per federal and/or state law.
  • Considerable travel and overtime may be required to complete work assignments.
  • Must successfully complete Physical Abilities Test (PAT).

Physical Demands

Physical Demand Level: H – Heavy Work. Exerting 50 to 100 pounds of force occasionally, and/or 25 to 50 pounds of force frequently, and/or greater than negligible up to 10–20 pounds of force constantly to move objects. Physical demand requirements are in excess of those for Medium Work.

Pay

Compensation Grade: N024-V68. Compensation Range: $34.96 – $43.11 per hour.

Benefits

AEP offers a comprehensive benefits package designed to support and enhance overall employee well-being, in addition to competitive compensation.

Similar jobs

P&C Technician

American Electric PowerNiles, MI· 2 wk ago
Engineering$30.27–$38.1/hrapply on aep.wd1.myworkdayjobs.com

P&C Tech

ProgressiveAtlanta, GA· 3 mo ago
Engineeringapply on aplitrak.com

P&C Technician II

American Electric PowerCorpus Christi, TX· 2 mo ago
Engineering$34.96–$52.7/hrapply on aep.wd1.myworkdayjobs.com

P&C Technician II

American Electric PowerAbilene, TX· 2 mo ago
Engineering$34.96–$36.12/hrapply on aep.wd1.myworkdayjobs.com

P&C Technician II

AEP TexasSan Angelo, TX· 2 mo ago
Engineering$34.96–$36.12/hrapply on aep.wd1.myworkdayjobs.com

P&C Technician II

American Electric PowerLaredo, TX· 4 mo ago
Engineering$34.96–$36.12/hrapply on aep.wd1.myworkdayjobs.com