Mechanical Fluids Design Engineer
for section headings like About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule. We should only include sections that have real content. We have:
- About the role: could be the paragraph describing the position: "Torch Technologies is seeking a Mechanical Fluids Design Engineer..." etc. We'll include that.
- Responsibilities: list of duties (the bullet list after "As a Mechanical Fluids Design Engineer, your duties will include, but are not limited to:" then a list of duties). We'll put those in - .
- Requirements: maybe "Required Qualifications" list: U.S. Citizenship, Bachelor’s degree..., 5+ years, active SECRET clearance, Experience with fluid systems design, Proficiency with SolidWorks..., Proficiency with SolidWorks Simulation...
- Qualifications: maybe "Preferred Qualifications": well versed in ASME standards, ISO/AS9100, proficiency with CREO, GD&T per ASME Y14.5-2018.
- Skills: maybe combine some? But we have separate sections; we could put technical skills under Skills? However we already have Required and Preferred qualifications. Could treat Skills as separate if there is explicit skill list; but we can omit if not distinct. The instruction: prefer a few substantive sections over many thin ones. We could combine Required and Preferred into Qualifications? But they ask for sections like Requirements, Qualifications, Skills. We can decide to include Requirements (required qualifications) and Qualifications (preferred qualifications). Skills maybe not needed if covered.
- Benefits: we have benefits list.
- Schedule: we have schedule Monday-Friday 8-5.
- Pay: not specified, so we should NOT include Pay section.
We must not repeat job title as heading. No Job ID. Remove boilerplate like EEO, application instructions, etc. Also remove navigation, cookie, legal, duplicated lines. Also remove "Thank you for your interest..." intro and closing paragraphs? The instruction: remove cookie/navigation/legal/EEO/equal-opportunity/scam-warning boilerplate, duplicated lines, and application instructions. The introductory paragraph about Torch Technologies is company overview; could be considered part of About the role? Might be okay to keep as part of About the role? But we need to preserve ALL substantive information; do not invent or summarize away detail. The company overview is substantive? It's about the company, not the role. Might be considered boilerplate? It's not EEO etc. It's describing the company; could be kept as part of About the role? The instruction: "Use
for section headings (e.g. About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule)." So About the role likely should contain description of the role, not company overview. But we could include company overview in About the role as context? Might be okay. However we need to preserve ALL substantive information; we could include a short paragraph about the company under About the role? Might be considered filler? The instruction says preserve ALL substantive information; do NOT invent or summarize away detail. So we should keep the company overview somewhere. Perhaps we can include a brief paragraph before sections? But we must output only HTML fragment; we could include a
for company overview before any headings? The instruction says use
for section headings; doesn't forbid other
outside sections. So we can have a
with company overview, then headings.
We must not include duplicated lines. Ensure we don't repeat.
Let's extract content:
Company overview: "Thank you for your interest in employment with Torch Technologies. We are a 100% employee-owned, Certified Great Place To Work and named Best Places to Work in Huntsville/Madison County, headquartered in Huntsville, AL. Our team provides superior research, development, and engineering services to the Federal Government and Department of War. As one of the nation’s top 100 defense companies, the services we provide directly support the men and women who serve our country. Our corporate mission sums up the pride our employee-owners take in the work we do: “Lighting the Pathway of Freedom”. And, as a Certified Evergreen ESOP, we have made the commitment to grow and sustain our company for the next 100 years! Come grow with us!"
Then role description: "Torch Technologies is seeking a Mechanical Fluids Design Engineer with a strong background in fluids and controls design. This position will support our Advanced Concepts Engineering (ACE) Technical Development (TD) business unit. The candidate will support design efforts for multiple platforms including aviation, ground, and weapon systems. Applicant will be designing MIL-STD compliant systems and components and/or modifications to existing DoD systems. The selected candidate will be responsible for the design and evaluation of complex mechanical and electro-mechanical systems, subsystems, and components; interfacing with other members of the design team and government customers to ensure program success; preparation of design specification, analyses, and recommendations for presentation in any project technical interchanges/preliminary design reviews/critical design reviews/fabrication readiness reviews/physical configuration audits. The candidate will be able to see designs through from white paper napkin to fabrication and test on a regular basis."
Then duties list: after "As a Mechanical Fluids Design Engineer, your duties will include, but are not limited to:" then bullet list:
- Develop efficient, cost-effective, and functional mechanical designs using tools such as SolidWorks and SolidWorks Simulation.
- Develop complex hydraulic fluid systems designs that would consist of the following: design and integration, schematics, flow paths, pressure/flow analysis, theory of operation, troubleshooting, and design verification, including piping design and pressure/stress calculations in accordance with ASME Standards (B31.3, etc.)
- Tubing and piping design, sizing, routing, fittings, bend requirements, supports, and installation.
- Selection and integration of valves, manifolds, regulators, filters, pumps, HPUs, instrumentation, quick-disconnects, and fittings.
- Design and integration of hydraulic test equipment, test procedures, system interfaces, safety, maintainability, and operator considerations.
- Create FEA-based structural, Piping, thermal, and flow analyses to validate mechanical and electromechanical designs.
- Generation of engineering reports to support engineering analysis to include finite element analyses for structural, CFD, thermal, vibration, and multi-physics models.
- Develop, up to and including, Level III technical data packages for novel mechanical and/or electromechanical designs.
- Provide mechanical engineering support in potential re-engineering tasks and support modification work orders and/or engineering change proposals.
- Support the complete production process by collaborating closely with project engineers, fabricators, technical writers, and program managers to ensure successful fielding of systems.
Then Required Qualifications list:
- U.S. Citizenship
- Bachelor’s degree in Mechanical Engineering, Physics, or Mathematics from an ABET accredited institution.
- 5+ years’ related experience.
- An active SECRET security clearance.
- Experience with fluid systems design.
- Proficiency with SolidWorks or similar CAD modeling software for the development of detailed parts and assemblies and corresponding 2D drawings.
- Proficiency with SolidWorks Simulation or comparable Finite Element Analysis software.
Preferred Qualifications:
- Well versed in ASME standards and experience working in ISO or AS 9100 accredited quality programs.
- Proficiency with CREO CAD software.
- Proficiency with geometric dimensioning and tolerancing in accordance with ASME Y14.5-2018.
Schedule: Monday–Friday, 8:00 AM – 5:00 PM
Work Location: On-site, Huntsville, Alabama
Travel: Up to 15% as required
Relocation Assistance Available: No
Position Contingent Upon Award of Contract: No
Benefits list: "Torch Technologies is proud to offer a stable and professional work environment, a competitive salary, and an excellent, comprehensive benefit package including: ESOP participation, 401(k) match, medical, dental, vision, life insurance, short-term disability, long-term disability, flexible spending accounts, Health Saving Accounts and Health Reimbursement Accounts, EAP, education assistance, paid time off, and holidays."
We should not include Pay section because not specified.
We should not include Work Location, Travel, Relocation, Position Contingent as headings unless we have a section for them; but we could fold minor metadata into a short
or drop it. The instruction: "do NOT put Job ID / requisition numbers as headings — fold minor metadata into a short
or drop it." So we can include a short
for Work Location, Travel, etc. Or we could drop them. But we need to preserve ALL substantive information; dropping them would lose info. So we should include them in a short
maybe under a heading like "Job Details"? But we don't have a heading for that; we could just put them in a
after the sections. The instruction says we can fold minor metadata into a short
. So we can create a
containing: "Work Location: On-site, Huntsville, Alabama. Travel: Up to 15% as required. Relocation Assistance Available: No. Position Contingent Upon Award of Contract: No." That preserves info.
Now we need to output only HTML fragment, no /, no markdown.
We'll structure:
Thank you for your interest in employment with Torch Technologies. We are a 100% employee-owned, Certified Great Place To Work and named Best Places to Work in Huntsville/Madison County, headquartered in Huntsville, AL. Our team provides superior research, development, and engineering services to the Federal Government and Department of War. As one of the nation’s top 100 defense companies, the services we provide directly support the men and women who serve our country. Our corporate mission sums up the pride our employee-owners take in the work we do: “Lighting the Pathway of Freedom”. And, as a Certified Evergreen ESOP, we have made the commitment to grow and sustain our company for the next 100 years! Come grow with us!
About the role
Torch Technologies is seeking a Mechanical Fluids Design Engineer with a strong background in fluids and controls design. This position will support our Advanced Concepts Engineering (ACE) Technical Development (TD) business unit. The candidate will support design efforts for multiple platforms including aviation, ground, and weapon systems. Applicant will be designing MIL-STD compliant systems and components and/or modifications to existing DoD systems. The selected candidate will be responsible for the design and evaluation of complex mechanical and electro-mechanical systems, subsystems, and components; interfacing with other members of the design team and government customers to ensure program success; preparation of design specification, analyses, and recommendations for presentation in any project technical interchanges/preliminary design reviews/critical design reviews/fabrication readiness reviews/physical configuration audits. The candidate will be able to see designs through from white paper napkin to fabrication and test on a regular basis.
Responsibilities
- Develop efficient, cost-effective, and functional mechanical designs using tools such as SolidWorks and SolidWorks Simulation.
- Develop complex hydraulic fluid systems designs that would consist of the following: design and integration, schematics, flow paths, pressure/flow analysis, theory of operation, troubleshooting, and design verification, including piping design and pressure/stress calculations in accordance with ASME Standards (B31.3, etc.)
- Tubing and piping design, sizing, routing, fittings, bend requirements, supports, and installation.
- Selection and integration of valves, manifolds, regulators, filters, pumps, HPUs, instrumentation, quick-disconnects, and fittings.
- Design and integration of hydraulic test equipment, test procedures, system interfaces, safety, maintainability, and operator considerations.
for section headings (e.g. About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule)." So About the role likely should contain description of the role, not company overview. But we could include company overview in About the role as context? Might be okay. However we need to preserve ALL substantive information; we could include a short paragraph about the company under About the role? Might be considered filler? The instruction says preserve ALL substantive information; do NOT invent or summarize away detail. So we should keep the company overview somewhere. Perhaps we can include a brief paragraph before sections? But we must output only HTML fragment; we could include a
for company overview before any headings? The instruction says use
for section headings; doesn't forbid other
outside sections. So we can have a
with company overview, then headings. We must not include duplicated lines. Ensure we don't repeat. Let's extract content: Company overview: "Thank you for your interest in employment with Torch Technologies. We are a 100% employee-owned, Certified Great Place To Work and named Best Places to Work in Huntsville/Madison County, headquartered in Huntsville, AL. Our team provides superior research, development, and engineering services to the Federal Government and Department of War. As one of the nation’s top 100 defense companies, the services we provide directly support the men and women who serve our country. Our corporate mission sums up the pride our employee-owners take in the work we do: “Lighting the Pathway of Freedom”. And, as a Certified Evergreen ESOP, we have made the commitment to grow and sustain our company for the next 100 years! Come grow with us!" Then role description: "Torch Technologies is seeking a Mechanical Fluids Design Engineer with a strong background in fluids and controls design. This position will support our Advanced Concepts Engineering (ACE) Technical Development (TD) business unit. The candidate will support design efforts for multiple platforms including aviation, ground, and weapon systems. Applicant will be designing MIL-STD compliant systems and components and/or modifications to existing DoD systems. The selected candidate will be responsible for the design and evaluation of complex mechanical and electro-mechanical systems, subsystems, and components; interfacing with other members of the design team and government customers to ensure program success; preparation of design specification, analyses, and recommendations for presentation in any project technical interchanges/preliminary design reviews/critical design reviews/fabrication readiness reviews/physical configuration audits. The candidate will be able to see designs through from white paper napkin to fabrication and test on a regular basis." Then duties list: after "As a Mechanical Fluids Design Engineer, your duties will include, but are not limited to:" then bullet list: - Develop efficient, cost-effective, and functional mechanical designs using tools such as SolidWorks and SolidWorks Simulation. - Develop complex hydraulic fluid systems designs that would consist of the following: design and integration, schematics, flow paths, pressure/flow analysis, theory of operation, troubleshooting, and design verification, including piping design and pressure/stress calculations in accordance with ASME Standards (B31.3, etc.) - Tubing and piping design, sizing, routing, fittings, bend requirements, supports, and installation. - Selection and integration of valves, manifolds, regulators, filters, pumps, HPUs, instrumentation, quick-disconnects, and fittings. - Design and integration of hydraulic test equipment, test procedures, system interfaces, safety, maintainability, and operator considerations. - Create FEA-based structural, Piping, thermal, and flow analyses to validate mechanical and electromechanical designs. - Generation of engineering reports to support engineering analysis to include finite element analyses for structural, CFD, thermal, vibration, and multi-physics models. - Develop, up to and including, Level III technical data packages for novel mechanical and/or electromechanical designs. - Provide mechanical engineering support in potential re-engineering tasks and support modification work orders and/or engineering change proposals. - Support the complete production process by collaborating closely with project engineers, fabricators, technical writers, and program managers to ensure successful fielding of systems. Then Required Qualifications list: - U.S. Citizenship - Bachelor’s degree in Mechanical Engineering, Physics, or Mathematics from an ABET accredited institution. - 5+ years’ related experience. - An active SECRET security clearance. - Experience with fluid systems design. - Proficiency with SolidWorks or similar CAD modeling software for the development of detailed parts and assemblies and corresponding 2D drawings. - Proficiency with SolidWorks Simulation or comparable Finite Element Analysis software. Preferred Qualifications: - Well versed in ASME standards and experience working in ISO or AS 9100 accredited quality programs. - Proficiency with CREO CAD software. - Proficiency with geometric dimensioning and tolerancing in accordance with ASME Y14.5-2018. Schedule: Monday–Friday, 8:00 AM – 5:00 PM Work Location: On-site, Huntsville, Alabama Travel: Up to 15% as required Relocation Assistance Available: No Position Contingent Upon Award of Contract: No Benefits list: "Torch Technologies is proud to offer a stable and professional work environment, a competitive salary, and an excellent, comprehensive benefit package including: ESOP participation, 401(k) match, medical, dental, vision, life insurance, short-term disability, long-term disability, flexible spending accounts, Health Saving Accounts and Health Reimbursement Accounts, EAP, education assistance, paid time off, and holidays." We should not include Pay section because not specified. We should not include Work Location, Travel, Relocation, Position Contingent as headings unless we have a section for them; but we could fold minor metadata into a short
or drop it. The instruction: "do NOT put Job ID / requisition numbers as headings — fold minor metadata into a short
or drop it." So we can include a short
for Work Location, Travel, etc. Or we could drop them. But we need to preserve ALL substantive information; dropping them would lose info. So we should include them in a short
maybe under a heading like "Job Details"? But we don't have a heading for that; we could just put them in a
after the sections. The instruction says we can fold minor metadata into a short
. So we can create a
containing: "Work Location: On-site, Huntsville, Alabama. Travel: Up to 15% as required. Relocation Assistance Available: No. Position Contingent Upon Award of Contract: No." That preserves info. Now we need to output only HTML fragment, no /, no markdown. We'll structure:
Thank you for your interest in employment with Torch Technologies. We are a 100% employee-owned, Certified Great Place To Work and named Best Places to Work in Huntsville/Madison County, headquartered in Huntsville, AL. Our team provides superior research, development, and engineering services to the Federal Government and Department of War. As one of the nation’s top 100 defense companies, the services we provide directly support the men and women who serve our country. Our corporate mission sums up the pride our employee-owners take in the work we do: “Lighting the Pathway of Freedom”. And, as a Certified Evergreen ESOP, we have made the commitment to grow and sustain our company for the next 100 years! Come grow with us!
About the role
Torch Technologies is seeking a Mechanical Fluids Design Engineer with a strong background in fluids and controls design. This position will support our Advanced Concepts Engineering (ACE) Technical Development (TD) business unit. The candidate will support design efforts for multiple platforms including aviation, ground, and weapon systems. Applicant will be designing MIL-STD compliant systems and components and/or modifications to existing DoD systems. The selected candidate will be responsible for the design and evaluation of complex mechanical and electro-mechanical systems, subsystems, and components; interfacing with other members of the design team and government customers to ensure program success; preparation of design specification, analyses, and recommendations for presentation in any project technical interchanges/preliminary design reviews/critical design reviews/fabrication readiness reviews/physical configuration audits. The candidate will be able to see designs through from white paper napkin to fabrication and test on a regular basis.
Responsibilities
- Develop efficient, cost-effective, and functional mechanical designs using tools such as SolidWorks and SolidWorks Simulation.
- Develop complex hydraulic fluid systems designs that would consist of the following: design and integration, schematics, flow paths, pressure/flow analysis, theory of operation, troubleshooting, and design verification, including piping design and pressure/stress calculations in accordance with ASME Standards (B31.3, etc.)
- Tubing and piping design, sizing, routing, fittings, bend requirements, supports, and installation.
- Selection and integration of valves, manifolds, regulators, filters, pumps, HPUs, instrumentation, quick-disconnects, and fittings.
- Design and integration of hydraulic test equipment, test procedures, system interfaces, safety, maintainability, and operator considerations.