Electrical Engineer III
for each heading. Use - for any list of duties/requirements/benefits, and
for prose. Do NOT repeat job title as heading. Do NOT put Job ID etc. Remove boilerplate. Preserve all substantive info. Include a section only when posting has real specific content for it. So we need to parse the description.
The description includes: Summary of Description: Develop and oversee engineering and design efforts for development of engineering drawings/packages for all phases of a project from feasibility study to construction.
Then Duties: many bullet-like sentences.
Then Education And Experience: BS degree with at least six years experience etc.
Then Must Be Proficient In The Following: list.
Then Must Be Experienced In The Following: list.
Then Must Have The Ability To Perform The Following: list.
Then Additional Skills: Knowledge of regulatory codes, excellent communication, software capability.
Then License/Certification Requirements: Valid Driver's License, Registered Engineer Intern (E.I.), required. Licensed Professional Engineer (P.E.), preferred. TWIC card (or ability to obtain).
Then Physical Requirements: list.
We need to map to sections: About the role (maybe summary), Responsibilities (duties), Requirements (education/experience?), Qualifications (maybe proficiency?), Skills (additional skills), Benefits (none), Pay (none), Schedule (none). Since no explicit benefits, pay, schedule given, we should NOT create those sections.
We need to decide which sections to include: About the role (summary), Responsibilities (duties), Requirements (education and experience), Qualifications (proficiency and experience?), Skills (additional skills, license/certification maybe?), maybe also Physical Requirements could be part of Requirements or separate? The instruction says use headings for section headings (e.g. About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule). So we can include any of those that have content. Physical Requirements could be part of Requirements or maybe Qualifications? But we could include a separate section? Not in list. Probably we should incorporate physical requirements into Requirements or Qualifications. Since they didn't give a heading for physical, we can embed within Requirements or Qualifications as prose/list.
We must not invent sections like Benefits if not present. So we will output sections: About the role, Responsibilities, Requirements, Qualifications, Skills.
We need to use
for each heading. Use - for any list of duties/requirements/benefits, and
for prose.
We need to preserve all substantive information, not invent or summarize away detail. So we need to include all details from the posting.
We need to avoid duplication. The posting has repeated content (some items appear multiple times). We need to preserve all substantive info but avoid duplicated lines? The instruction: "Remove cookie/navigation/legal/EEO/equal-opportunity/scam-warning boilerplate, duplicated lines, and application instructions." So we should remove duplicated lines. So we need to deduplicate repeated sentences.
We need to carefully extract unique bullet points.
Let's parse the text.
Summary: "Develop and oversee the engineering and design efforts for the development of engineering drawings/packages for all phases of a project from the feasibility study to construction."
Duties list (starting after "Duties"):
- Develop electrical specifications, such as generators and motors, power transformers, power circuit breakers, medium and low voltage power distribution equipment (switchgear, MCCs, etc.).
- Lead effort and direct others in developing drawings for new or modifications of existing power distribution systems, including one-line diagrams, three-line diagrams, schematics and wiring diagrams.
- Review and checks engineering packages for accuracy and quality, independently.
- Develop construction scopes of work, front-end engineering and design project scopes and project execution plans, independently.
- Lead effort and direct others in gathering data from electrical equipment and systems.
- Conduct field evaluations to support project work involving new and existing power systems.
- Lead effort and direct others in sizing electrical equipment, cable, cable tray and conduit.
- Prepare technical bid evaluations, independently.
- Coordinate electrical heat trace system design.
- Assist with applying hazardous Area Classification methodology, including determination of classified areas, equipment requirements, etc.
- Requires limited supervision.
- Perform electrical system modeling and studies using ETAP, SKM, etc.
- Able to use field and manufacturer data to build models, independently.
- Interpret and define project requirements and effectively communicate scope of work to other discipline engineers and designers.
- Interact directly with client personnel and project managers to discuss project scope, options, recommendations and to request to data required to execute projects.
- Develop engineering budget estimates and define scope of work for prospective projects.
- Mentor and guide junior engineers.
- Provide other job-related duties as assigned.
Education And Experience:
- Bachelor of Science (BS) Degree in a related technical field from an accredited University with at least six (6) years’ experience in industrial, petrochemical, chemical or utility industries or an equivalent combination of education and experience sufficient to successfully perform the essential duties of the job such as those listed above.
Must Be Proficient In The Following:
- Developing electrical specifications, such as generators and motors, power transformers, power circuit breakers, medium low voltage power distribution equipment (switchgear, MCCs, etc.) and mentor junior level engineers.
- Medium and low voltage power distribution equipment (Switchgear, transformers, MCCs, etc.).
- MCC, switchgear and other equipment control systems.
- Interpreting electrical drawings, such as one-lines, three-lines and schematics.
- Developing drawings for new or modifications of existing power distribution systems including one-line diagrams, three-line diagrams, schematics and wiring diagrams.
- Able to check work of other engineers.
- Reviewing and checking engineering packages for accuracy and quality, independently.
- Gathering data from electrical equipment and systems. Conduct field evaluations to support project work involving new and existing power systems.
- Electrical equipment, cable, cable tray and conduit sizing.
- Developing engineering budget estimates and defining scope of work for prospective projects.
Must Be Experienced In The Following:
- Developing construction scopes of work, front-end engineering and design project scopes and project execution plans, independently.
- Preparation of technical bid evaluations, independently.
- Electrical Heat Trace Systems.
- Hazardous Area Classification methodology, including determination of classified areas, equipment requirements, etc.
- Requires limited supervision.
- Performing electrical system modeling and studies using ETAP, SKM, etc. Able to use field and manufacturer data to build models, independently.
- Implementing recommended protection settings and generation of protection relay setting files.
Must Have The Ability To Perform The Following:
- Interpret and define project requirements and effectively communicate scope of work to other discipline engineers and designers.
- Interact directly with client personnel and project managers to discuss project scope, options, recommendations and to request data required to execute projects.
- Mentor and guide junior engineers.
Additional Skills:
- Knowledge of regulatory codes and requirements in the related discipline, required.
- Excellent written and oral communication skills.
- Software capability: MS Word, Excel, Outlook and PDF Editor software.
License/Certification Requirements:
- Valid Driver's License as per State law or requirement.
- Registered Engineer Intern (E.I.), required.
- Licensed Professional Engineer (P.E.), preferred.
- TWIC card (or ability to obtain).
Physical Requirements:
- Ability to walk up to one mile on industrial plant and construction sites outdoors at any time of the year.
- Ability to work in protective clothing which may elevate body temperature by several degrees Fahrenheit for periods up to 15 minutes without a break.
- Ability to use multi-level stair towers and rung ladders unassisted.
- Ability to hear safety alarms and signals while wearing hearing protection.
- Ability to sit at desk and operate computer for extended periods of time.
- Ability to stand, use hands and fingers, grip, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk and hear.
- Ability to see with visual acuity and distinguish between colors.
- Ability to operate a motor vehicle and have a valid driver’s license.
- Ability to lift and carry 15 lbs. on a regular basis is required and at times lifting up to 25 lbs. may be required.
Now we need to deduplicate. Many items appear in multiple sections. For example, "Develop electrical specifications..." appears in Duties and also in Must Be Proficient. We need to keep only one instance? The instruction: "Remove duplicated lines". So we should eliminate duplicate sentences/phrases across the whole posting. We need to keep each unique substantive statement once.
Thus we need to compile a set of unique bullet points covering all responsibilities, requirements, qualifications, skills, license, physical.
We also need to structure into sections: About the role (summary), Responsibilities (duties), Requirements (education/experience), Qualifications (proficiency/experience/abilities?), Skills (additional skills, license/certification maybe?), maybe Physical Requirements could be part of Requirements or Qualifications. But we have to follow allowed headings. We could put Physical Requirements under Requirements or Qualifications. Since they didn't give a heading for physical, we can include it under Requirements as a list.
We need to decide what goes where.
About the role: summary paragraph.
Responsibilities: duties (the core job duties). Should include items like developing electrical specs, leading drawing development, reviewing packages, developing scopes, leading data gathering, field evaluations, sizing equipment, preparing bid evaluations, coordinating heat trace, assisting hazardous area classification, performing modeling, interpreting requirements, interacting with client, developing budget estimates, mentoring junior engineers, other duties.
Requirements: education and experience (BS + 6 years). Also maybe physical requirements? Could be separate but we can include physical under Requirements as well.
Qualifications: proficiency, experience, abilities (the lists under Must Be Proficient, Must Be Experienced, Must Have Ability). Could combine.
Skills: additional skills (regulatory knowledge, communication, software capability) plus license/certification requirements (driver's license, E.I., P.E., TWIC). Could also include physical? but we already used.
We must not create sections with filler. So we will include only those sections that have content.
Now we need to deduplicate.
Let's list all unique statements.
I'll go through each bullet and note duplicates.
From Duties:
1. Develop electrical specifications, such as generators and motors, power transformers, power circuit breakers, medium and low voltage power distribution equipment (switchgear, MCCs, etc.).
2. Lead effort and direct others in developing drawings for new or modifications of existing power distribution systems, including one-line diagrams, three-line diagrams, schematics and wiring diagrams.
3. Review and checks engineering packages for accuracy and quality, independently. (Note grammar: "Review and checks" maybe typo; keep as is.)
4. Develop construction scopes of work, front-end engineering and design project scopes and project execution plans, independently.
5. Lead effort and direct others in gathering data from electrical equipment and systems.
6. Conduct field evaluations to support project work involving new and existing power systems.
7. Lead effort and direct others in sizing electrical equipment, cable, cable tray and conduit.
8. Prepare technical bid evaluations, independently.
9. Coordinate electrical heat trace system design.
10. Assist with applying hazardous Area Classification methodology, including determination of classified areas, equipment requirements, etc.
11. Requires limited supervision.
12. Perform electrical system modeling and studies using ETAP, SKM, etc.
13. Able to use field and manufacturer data to build models, independently.
14. Interpret and define project requirements and effectively communicate scope of work to other discipline engineers and designers.
15. Interact directly with client personnel and project managers to discuss project scope, options, recommendations and to request to data required to execute projects. (Note "request to data" maybe typo; keep.)
16. Develop engineering budget estimates and define scope of work for prospective projects.
17. Mentor and guide junior engineers.
18. Provide other job-related duties as assigned.
Education And Experience:
19. Bachelor of Science
for prose. Do NOT repeat job title as heading. Do NOT put Job ID etc. Remove boilerplate. Preserve all substantive info. Include a section only when posting has real specific content for it. So we need to parse the description. The description includes: Summary of Description: Develop and oversee engineering and design efforts for development of engineering drawings/packages for all phases of a project from feasibility study to construction. Then Duties: many bullet-like sentences. Then Education And Experience: BS degree with at least six years experience etc. Then Must Be Proficient In The Following: list. Then Must Be Experienced In The Following: list. Then Must Have The Ability To Perform The Following: list. Then Additional Skills: Knowledge of regulatory codes, excellent communication, software capability. Then License/Certification Requirements: Valid Driver's License, Registered Engineer Intern (E.I.), required. Licensed Professional Engineer (P.E.), preferred. TWIC card (or ability to obtain). Then Physical Requirements: list. We need to map to sections: About the role (maybe summary), Responsibilities (duties), Requirements (education/experience?), Qualifications (maybe proficiency?), Skills (additional skills), Benefits (none), Pay (none), Schedule (none). Since no explicit benefits, pay, schedule given, we should NOT create those sections. We need to decide which sections to include: About the role (summary), Responsibilities (duties), Requirements (education and experience), Qualifications (proficiency and experience?), Skills (additional skills, license/certification maybe?), maybe also Physical Requirements could be part of Requirements or separate? The instruction says use headings for section headings (e.g. About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule). So we can include any of those that have content. Physical Requirements could be part of Requirements or maybe Qualifications? But we could include a separate section? Not in list. Probably we should incorporate physical requirements into Requirements or Qualifications. Since they didn't give a heading for physical, we can embed within Requirements or Qualifications as prose/list. We must not invent sections like Benefits if not present. So we will output sections: About the role, Responsibilities, Requirements, Qualifications, Skills. We need to use
for each heading. Use - for any list of duties/requirements/benefits, and
for prose.
We need to preserve all substantive information, not invent or summarize away detail. So we need to include all details from the posting.
We need to avoid duplication. The posting has repeated content (some items appear multiple times). We need to preserve all substantive info but avoid duplicated lines? The instruction: "Remove cookie/navigation/legal/EEO/equal-opportunity/scam-warning boilerplate, duplicated lines, and application instructions." So we should remove duplicated lines. So we need to deduplicate repeated sentences.
We need to carefully extract unique bullet points.
Let's parse the text.
Summary: "Develop and oversee the engineering and design efforts for the development of engineering drawings/packages for all phases of a project from the feasibility study to construction."
Duties list (starting after "Duties"):
- Develop electrical specifications, such as generators and motors, power transformers, power circuit breakers, medium and low voltage power distribution equipment (switchgear, MCCs, etc.).
- Lead effort and direct others in developing drawings for new or modifications of existing power distribution systems, including one-line diagrams, three-line diagrams, schematics and wiring diagrams.
- Review and checks engineering packages for accuracy and quality, independently.
- Develop construction scopes of work, front-end engineering and design project scopes and project execution plans, independently.
- Lead effort and direct others in gathering data from electrical equipment and systems.
- Conduct field evaluations to support project work involving new and existing power systems.
- Lead effort and direct others in sizing electrical equipment, cable, cable tray and conduit.
- Prepare technical bid evaluations, independently.
- Coordinate electrical heat trace system design.
- Assist with applying hazardous Area Classification methodology, including determination of classified areas, equipment requirements, etc.
- Requires limited supervision.
- Perform electrical system modeling and studies using ETAP, SKM, etc.
- Able to use field and manufacturer data to build models, independently.
- Interpret and define project requirements and effectively communicate scope of work to other discipline engineers and designers.
- Interact directly with client personnel and project managers to discuss project scope, options, recommendations and to request to data required to execute projects.
- Develop engineering budget estimates and define scope of work for prospective projects.
- Mentor and guide junior engineers.
- Provide other job-related duties as assigned.
Education And Experience:
- Bachelor of Science (BS) Degree in a related technical field from an accredited University with at least six (6) years’ experience in industrial, petrochemical, chemical or utility industries or an equivalent combination of education and experience sufficient to successfully perform the essential duties of the job such as those listed above.
Must Be Proficient In The Following:
- Developing electrical specifications, such as generators and motors, power transformers, power circuit breakers, medium low voltage power distribution equipment (switchgear, MCCs, etc.) and mentor junior level engineers.
- Medium and low voltage power distribution equipment (Switchgear, transformers, MCCs, etc.).
- MCC, switchgear and other equipment control systems.
- Interpreting electrical drawings, such as one-lines, three-lines and schematics.
- Developing drawings for new or modifications of existing power distribution systems including one-line diagrams, three-line diagrams, schematics and wiring diagrams.
- Able to check work of other engineers.
- Reviewing and checking engineering packages for accuracy and quality, independently.
- Gathering data from electrical equipment and systems. Conduct field evaluations to support project work involving new and existing power systems.
- Electrical equipment, cable, cable tray and conduit sizing.
- Developing engineering budget estimates and defining scope of work for prospective projects.
Must Be Experienced In The Following:
- Developing construction scopes of work, front-end engineering and design project scopes and project execution plans, independently.
- Preparation of technical bid evaluations, independently.
- Electrical Heat Trace Systems.
- Hazardous Area Classification methodology, including determination of classified areas, equipment requirements, etc.
- Requires limited supervision.
- Performing electrical system modeling and studies using ETAP, SKM, etc. Able to use field and manufacturer data to build models, independently.
- Implementing recommended protection settings and generation of protection relay setting files.
Must Have The Ability To Perform The Following:
- Interpret and define project requirements and effectively communicate scope of work to other discipline engineers and designers.
- Interact directly with client personnel and project managers to discuss project scope, options, recommendations and to request data required to execute projects.
- Mentor and guide junior engineers.
Additional Skills:
- Knowledge of regulatory codes and requirements in the related discipline, required.
- Excellent written and oral communication skills.
- Software capability: MS Word, Excel, Outlook and PDF Editor software.
License/Certification Requirements:
- Valid Driver's License as per State law or requirement.
- Registered Engineer Intern (E.I.), required.
- Licensed Professional Engineer (P.E.), preferred.
- TWIC card (or ability to obtain).
Physical Requirements:
- Ability to walk up to one mile on industrial plant and construction sites outdoors at any time of the year.
- Ability to work in protective clothing which may elevate body temperature by several degrees Fahrenheit for periods up to 15 minutes without a break.
- Ability to use multi-level stair towers and rung ladders unassisted.
- Ability to hear safety alarms and signals while wearing hearing protection.
- Ability to sit at desk and operate computer for extended periods of time.
- Ability to stand, use hands and fingers, grip, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk and hear.
- Ability to see with visual acuity and distinguish between colors.
- Ability to operate a motor vehicle and have a valid driver’s license.
- Ability to lift and carry 15 lbs. on a regular basis is required and at times lifting up to 25 lbs. may be required.
Now we need to deduplicate. Many items appear in multiple sections. For example, "Develop electrical specifications..." appears in Duties and also in Must Be Proficient. We need to keep only one instance? The instruction: "Remove duplicated lines". So we should eliminate duplicate sentences/phrases across the whole posting. We need to keep each unique substantive statement once.
Thus we need to compile a set of unique bullet points covering all responsibilities, requirements, qualifications, skills, license, physical.
We also need to structure into sections: About the role (summary), Responsibilities (duties), Requirements (education/experience), Qualifications (proficiency/experience/abilities?), Skills (additional skills, license/certification maybe?), maybe Physical Requirements could be part of Requirements or Qualifications. But we have to follow allowed headings. We could put Physical Requirements under Requirements or Qualifications. Since they didn't give a heading for physical, we can include it under Requirements as a list.
We need to decide what goes where.
About the role: summary paragraph.
Responsibilities: duties (the core job duties). Should include items like developing electrical specs, leading drawing development, reviewing packages, developing scopes, leading data gathering, field evaluations, sizing equipment, preparing bid evaluations, coordinating heat trace, assisting hazardous area classification, performing modeling, interpreting requirements, interacting with client, developing budget estimates, mentoring junior engineers, other duties.
Requirements: education and experience (BS + 6 years). Also maybe physical requirements? Could be separate but we can include physical under Requirements as well.
Qualifications: proficiency, experience, abilities (the lists under Must Be Proficient, Must Be Experienced, Must Have Ability). Could combine.
Skills: additional skills (regulatory knowledge, communication, software capability) plus license/certification requirements (driver's license, E.I., P.E., TWIC). Could also include physical? but we already used.
We must not create sections with filler. So we will include only those sections that have content.
Now we need to deduplicate.
Let's list all unique statements.
I'll go through each bullet and note duplicates.
From Duties:
1. Develop electrical specifications, such as generators and motors, power transformers, power circuit breakers, medium and low voltage power distribution equipment (switchgear, MCCs, etc.).
2. Lead effort and direct others in developing drawings for new or modifications of existing power distribution systems, including one-line diagrams, three-line diagrams, schematics and wiring diagrams.
3. Review and checks engineering packages for accuracy and quality, independently. (Note grammar: "Review and checks" maybe typo; keep as is.)
4. Develop construction scopes of work, front-end engineering and design project scopes and project execution plans, independently.
5. Lead effort and direct others in gathering data from electrical equipment and systems.
6. Conduct field evaluations to support project work involving new and existing power systems.
7. Lead effort and direct others in sizing electrical equipment, cable, cable tray and conduit.
8. Prepare technical bid evaluations, independently.
9. Coordinate electrical heat trace system design.
10. Assist with applying hazardous Area Classification methodology, including determination of classified areas, equipment requirements, etc.
11. Requires limited supervision.
12. Perform electrical system modeling and studies using ETAP, SKM, etc.
13. Able to use field and manufacturer data to build models, independently.
14. Interpret and define project requirements and effectively communicate scope of work to other discipline engineers and designers.
15. Interact directly with client personnel and project managers to discuss project scope, options, recommendations and to request to data required to execute projects. (Note "request to data" maybe typo; keep.)
16. Develop engineering budget estimates and define scope of work for prospective projects.
17. Mentor and guide junior engineers.
18. Provide other job-related duties as assigned.
Education And Experience:
19. Bachelor of Science
for prose. We need to preserve all substantive information, not invent or summarize away detail. So we need to include all details from the posting. We need to avoid duplication. The posting has repeated content (some items appear multiple times). We need to preserve all substantive info but avoid duplicated lines? The instruction: "Remove cookie/navigation/legal/EEO/equal-opportunity/scam-warning boilerplate, duplicated lines, and application instructions." So we should remove duplicated lines. So we need to deduplicate repeated sentences. We need to carefully extract unique bullet points. Let's parse the text. Summary: "Develop and oversee the engineering and design efforts for the development of engineering drawings/packages for all phases of a project from the feasibility study to construction." Duties list (starting after "Duties"): - Develop electrical specifications, such as generators and motors, power transformers, power circuit breakers, medium and low voltage power distribution equipment (switchgear, MCCs, etc.). - Lead effort and direct others in developing drawings for new or modifications of existing power distribution systems, including one-line diagrams, three-line diagrams, schematics and wiring diagrams. - Review and checks engineering packages for accuracy and quality, independently. - Develop construction scopes of work, front-end engineering and design project scopes and project execution plans, independently. - Lead effort and direct others in gathering data from electrical equipment and systems. - Conduct field evaluations to support project work involving new and existing power systems. - Lead effort and direct others in sizing electrical equipment, cable, cable tray and conduit. - Prepare technical bid evaluations, independently. - Coordinate electrical heat trace system design. - Assist with applying hazardous Area Classification methodology, including determination of classified areas, equipment requirements, etc. - Requires limited supervision. - Perform electrical system modeling and studies using ETAP, SKM, etc. - Able to use field and manufacturer data to build models, independently. - Interpret and define project requirements and effectively communicate scope of work to other discipline engineers and designers. - Interact directly with client personnel and project managers to discuss project scope, options, recommendations and to request to data required to execute projects. - Develop engineering budget estimates and define scope of work for prospective projects. - Mentor and guide junior engineers. - Provide other job-related duties as assigned. Education And Experience: - Bachelor of Science (BS) Degree in a related technical field from an accredited University with at least six (6) years’ experience in industrial, petrochemical, chemical or utility industries or an equivalent combination of education and experience sufficient to successfully perform the essential duties of the job such as those listed above. Must Be Proficient In The Following: - Developing electrical specifications, such as generators and motors, power transformers, power circuit breakers, medium low voltage power distribution equipment (switchgear, MCCs, etc.) and mentor junior level engineers. - Medium and low voltage power distribution equipment (Switchgear, transformers, MCCs, etc.). - MCC, switchgear and other equipment control systems. - Interpreting electrical drawings, such as one-lines, three-lines and schematics. - Developing drawings for new or modifications of existing power distribution systems including one-line diagrams, three-line diagrams, schematics and wiring diagrams. - Able to check work of other engineers. - Reviewing and checking engineering packages for accuracy and quality, independently. - Gathering data from electrical equipment and systems. Conduct field evaluations to support project work involving new and existing power systems. - Electrical equipment, cable, cable tray and conduit sizing. - Developing engineering budget estimates and defining scope of work for prospective projects. Must Be Experienced In The Following: - Developing construction scopes of work, front-end engineering and design project scopes and project execution plans, independently. - Preparation of technical bid evaluations, independently. - Electrical Heat Trace Systems. - Hazardous Area Classification methodology, including determination of classified areas, equipment requirements, etc. - Requires limited supervision. - Performing electrical system modeling and studies using ETAP, SKM, etc. Able to use field and manufacturer data to build models, independently. - Implementing recommended protection settings and generation of protection relay setting files. Must Have The Ability To Perform The Following: - Interpret and define project requirements and effectively communicate scope of work to other discipline engineers and designers. - Interact directly with client personnel and project managers to discuss project scope, options, recommendations and to request data required to execute projects. - Mentor and guide junior engineers. Additional Skills: - Knowledge of regulatory codes and requirements in the related discipline, required. - Excellent written and oral communication skills. - Software capability: MS Word, Excel, Outlook and PDF Editor software. License/Certification Requirements: - Valid Driver's License as per State law or requirement. - Registered Engineer Intern (E.I.), required. - Licensed Professional Engineer (P.E.), preferred. - TWIC card (or ability to obtain). Physical Requirements: - Ability to walk up to one mile on industrial plant and construction sites outdoors at any time of the year. - Ability to work in protective clothing which may elevate body temperature by several degrees Fahrenheit for periods up to 15 minutes without a break. - Ability to use multi-level stair towers and rung ladders unassisted. - Ability to hear safety alarms and signals while wearing hearing protection. - Ability to sit at desk and operate computer for extended periods of time. - Ability to stand, use hands and fingers, grip, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk and hear. - Ability to see with visual acuity and distinguish between colors. - Ability to operate a motor vehicle and have a valid driver’s license. - Ability to lift and carry 15 lbs. on a regular basis is required and at times lifting up to 25 lbs. may be required. Now we need to deduplicate. Many items appear in multiple sections. For example, "Develop electrical specifications..." appears in Duties and also in Must Be Proficient. We need to keep only one instance? The instruction: "Remove duplicated lines". So we should eliminate duplicate sentences/phrases across the whole posting. We need to keep each unique substantive statement once. Thus we need to compile a set of unique bullet points covering all responsibilities, requirements, qualifications, skills, license, physical. We also need to structure into sections: About the role (summary), Responsibilities (duties), Requirements (education/experience), Qualifications (proficiency/experience/abilities?), Skills (additional skills, license/certification maybe?), maybe Physical Requirements could be part of Requirements or Qualifications. But we have to follow allowed headings. We could put Physical Requirements under Requirements or Qualifications. Since they didn't give a heading for physical, we can include it under Requirements as a list. We need to decide what goes where. About the role: summary paragraph. Responsibilities: duties (the core job duties). Should include items like developing electrical specs, leading drawing development, reviewing packages, developing scopes, leading data gathering, field evaluations, sizing equipment, preparing bid evaluations, coordinating heat trace, assisting hazardous area classification, performing modeling, interpreting requirements, interacting with client, developing budget estimates, mentoring junior engineers, other duties. Requirements: education and experience (BS + 6 years). Also maybe physical requirements? Could be separate but we can include physical under Requirements as well. Qualifications: proficiency, experience, abilities (the lists under Must Be Proficient, Must Be Experienced, Must Have Ability). Could combine. Skills: additional skills (regulatory knowledge, communication, software capability) plus license/certification requirements (driver's license, E.I., P.E., TWIC). Could also include physical? but we already used. We must not create sections with filler. So we will include only those sections that have content. Now we need to deduplicate. Let's list all unique statements. I'll go through each bullet and note duplicates. From Duties: 1. Develop electrical specifications, such as generators and motors, power transformers, power circuit breakers, medium and low voltage power distribution equipment (switchgear, MCCs, etc.). 2. Lead effort and direct others in developing drawings for new or modifications of existing power distribution systems, including one-line diagrams, three-line diagrams, schematics and wiring diagrams. 3. Review and checks engineering packages for accuracy and quality, independently. (Note grammar: "Review and checks" maybe typo; keep as is.) 4. Develop construction scopes of work, front-end engineering and design project scopes and project execution plans, independently. 5. Lead effort and direct others in gathering data from electrical equipment and systems. 6. Conduct field evaluations to support project work involving new and existing power systems. 7. Lead effort and direct others in sizing electrical equipment, cable, cable tray and conduit. 8. Prepare technical bid evaluations, independently. 9. Coordinate electrical heat trace system design. 10. Assist with applying hazardous Area Classification methodology, including determination of classified areas, equipment requirements, etc. 11. Requires limited supervision. 12. Perform electrical system modeling and studies using ETAP, SKM, etc. 13. Able to use field and manufacturer data to build models, independently. 14. Interpret and define project requirements and effectively communicate scope of work to other discipline engineers and designers. 15. Interact directly with client personnel and project managers to discuss project scope, options, recommendations and to request to data required to execute projects. (Note "request to data" maybe typo; keep.) 16. Develop engineering budget estimates and define scope of work for prospective projects. 17. Mentor and guide junior engineers. 18. Provide other job-related duties as assigned. Education And Experience: 19. Bachelor of Science