Electrical Engineer, Data Center Infrastructure - Memphis
for section headings (About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule)
- Use - for lists
- Use
for prose
- Do NOT repeat job title as heading (not provided anyway)
- Do NOT put Job ID/requisition numbers as headings (none present)
- Preserve ALL substantive information
- Remove boilerplate (EEO, privacy notice, etc.)
- Include section ONLY when real specific content exists
- No filler/placeholder text
- Output ONLY HTML fragment, no html/body, no markdown fences
The EEO and privacy notice at the end should be removed.
Now, the introductory paragraphs: "SpaceX was founded under the belief..." and "SpaceXSI is building Super Intelligence..." - these are company description. Should I include them? The rule says preserve all substantive information. They are not boilerplate; they describe the company and mission. I'll include them as prose paragraphs before the sections.
The "ABOUT THE ROLE:" section has a paragraph describing the role. That should be under an
About the role
with a .
"RESPONSIBILITIES:" has a list of bullet points. The text shows a colon then a list. I'll make an
Responsibilities
and a with each item as - . Note that the first line "Work in a team environment with other engineering disciplines to provide detailed electrical design and specification for the installation of the following equipment and systems:" is an intro sentence, then a list of equipment/systems. Then additional responsibilities. I need to parse carefully.
Let me break down the responsibilities text:
"Work in a team environment with other engineering disciplines to provide detailed electrical design and specification for the installation of the following equipment and systems:
Electrical power distribution systems.
Switch-gear and motor control centers.
Exterior and interior lighting.
Ground support system controls and ladder logic.
Uninterruptible power supply (UPS) units.
Standby and emergency generators.
Automatic transfer switches.
Power monitoring hardware and software.
Data/phone distribution and wiring.
Building and site grounding systems.
Fire alarm systems and lightning protection systems.
Provide electrical engineering support to facility technicians to troubleshoot existing electrical equipment and controllers.
Provide engineering support for the design, operation, and troubleshooting of all the facility's electrical components and systems, including:
Load flow analysis of electrical power distribution systems.
Electrical equipment evaluation.
Building and facility equipment grounding.
Power monitoring hardware and software.
Ensure that all equipment interfaces properly with other mechanical and electrical systems, including compatibility with facility power budgets.
Coordinate all electrical installations and maintenance activities with local electrical utilities personnel.
Ensure all electrical designs and installations conform to applicable codes and regulations.
Provide code review and analysis utilizing NFPA 70E, NFPA 70 NEC, NFPA 497, NFPA 101, Vol 5 & 6 AFSPCMAN 91-710, and IBC."
This is a mix of a lead-in sentence, a list of equipment/systems, then several distinct responsibilities. I should structure as a list of responsibilities. The first part could be one responsibility: "Work in a team environment... for the installation of the following equipment and systems:" and then the sub-items could be a nested list? But the rule says use
- for any list of duties. Probably each bullet is a duty. The equipment/systems list is a list of items they design for. Could be a nested list, but simpler to make each a separate liability item. However, the text groups them under "the following equipment and systems:" then lists them. Then separate sentences for other responsibilities.
I'll treat each distinct duty as a list item. The equipment/systems list can be a sub-list or separate items. Since the rule says "use
- for any list of duties/requirements/benefits", I'll make a flat list of responsibilities, each as a
- . For the equipment/systems, I can include them as a single liability with a nested list, but that might be overcomplicating. The instruction: "Use
- for any list of duties/requirements/benefits". It doesn't forbid nested lists. But to keep it simple, I'll make each line a separate
- . However, the first line is a sentence that introduces the list. I'll combine: "Work in a team environment with other engineering disciplines to provide detailed electrical design and specification for the installation of the following equipment and systems: Electrical power distribution systems; Switch-gear and motor control centers; ..." but that's messy.
Better: Create a
for responsibilities. The first - contains the introductory sentence and then a nested
for the equipment/systems. Then subsequent - for each other responsibility.
Let's see: The responsibilities are:
1. Work in a team environment... for the installation of the following equipment and systems: (list of 12 items)
2. Provide electrical engineering support to facility technicians to troubleshoot existing electrical equipment and controllers.
3. Provide engineering support for the design, operation, and troubleshooting of all the facility's electrical components and systems, including: (list of 4 items)
4. Ensure that all equipment interfaces properly with other mechanical and electrical systems, including compatibility with facility power budgets.
5. Coordinate all electrical installations and maintenance activities with local electrical utilities personnel.
6. Ensure all electrical designs and installations conform to applicable codes and regulations.
7. Provide code review and analysis utilizing NFPA 70E, NFPA 70 NEC, NFPA 497, NFPA 101, Vol 5 & 6 AFSPCMAN 91-710, and IBC.
That's 7 main responsibilities, with two having sub-lists. I'll implement nested lists.
Similarly, BASIC QUALIFICATIONS: two bullet points (degree and experience). PREFERRED SKILLS AND EXPERIENCE: many bullet points.
Now, the introductory company paragraphs: I'll put them as
before the sections.
No Pay, Schedule, Benefits sections because not mentioned.
Now, output only HTML fragment.
Let me write the HTML.
First, company description paragraphs:
SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today, SpaceX is actively developing the technologies to make this possible, with the ultimate goal of making life multiplanetary and expanding consciousness to the stars.
SpaceXSI is building Super Intelligence to help humanity understand the universe. Our teams are building the full Super Intelligence stack: from our Colossus supercomputers, to Grok models, to our suite of applications, including Grok Bot, Grok Build, Grok Imagine, Grok Voice, and X. We're creating a powerful flywheel where more compute trains better models, better models power more useful products, and what we learn from people using those products shapes what we build next.
Then sections:
About the role
As a member of the facility operations team, you will design, build, and activate some of the world’s most technically advanced facilities and data centers. You will be able to operate with autonomy to solve diverse and complex problems, excel at managing multiple projects simultaneously, and work in a dynamic, fast-paced environment. You will work with other MEP engineers, trade partners, and internal customers to support these goals and have the opportunity to drive real global impact, ultimately leading to making life multiplanetary.
Responsibilities
- Work in a team environment with other engineering disciplines to provide detailed electrical design and specification for the installation of the following equipment and systems:
- Electrical power distribution systems
- Switch-gear and motor control centers
- Exterior and interior lighting
- Ground support system controls and ladder logic
- Uninterruptible power supply (UPS) units
- Standby and emergency generators
- Automatic transfer switches
- Power monitoring hardware and software
- Data/phone distribution and wiring
- Building and site grounding systems
- Fire alarm systems and lightning protection systems
- Provide electrical engineering support to facility technicians to troubleshoot existing electrical equipment and controllers.
- Provide engineering support for the design, operation, and troubleshooting of all the facility's electrical components and systems, including:
- Load flow analysis of electrical power distribution systems
- Electrical equipment evaluation
- Building and facility equipment grounding
- Power monitoring hardware and software
- Ensure that all equipment interfaces properly with other mechanical and electrical systems, including compatibility with facility power budgets.
- Coordinate all electrical installations and maintenance activities with local electrical utilities personnel.
- Ensure all electrical designs and installations conform to applicable codes and regulations.
- Provide code review and analysis utilizing NFPA 70E, NFPA 70 NEC, NFPA 497, NFPA 101, Vol 5 & 6 AFSPCMAN 91-710, and IBC.
Basic Qualifications
- Bachelor’s degree in electrical engineering or other engineering discipline.
- 3+ years of professional experience working on electrical projects, power distribution systems, switchgear, UPS's, and/or generators.
Preferred Skills and Experience
- 5+ years of professional experience in a similar role.
- Professional Engineering (PE) license.
- Ability to read and understand power and control schematics.
- Ability to read and understand highly technical equipment operation and maintenance (O&M) manuals.
- Experience with variable frequency drives (VFDs) and industrial pumps.
- Experience with controls in MODBUS communication.
- Experience with medium voltage distribution.
- Experience with control panel design and production.
- Working knowledge of power coordination and arc flash.
- Ability to work on multiple tasks concurrently.
- High level of self-motivation, with the ability to work under minimal supervision.
- Good organizational skills.
- Ability to prioritize and schedule workload.
- Strong written and verbal communication skills.
Note: I need to escape ampersands in HTML: & for & in "O&M" and "Vol 5 & 6". Also in "UPS's" maybe keep as is, but apostrophe is fine. In "NFPA 70E, NFPA 70 NEC,
for prose - Do NOT repeat job title as heading (not provided anyway) - Do NOT put Job ID/requisition numbers as headings (none present) - Preserve ALL substantive information - Remove boilerplate (EEO, privacy notice, etc.) - Include section ONLY when real specific content exists - No filler/placeholder text - Output ONLY HTML fragment, no html/body, no markdown fences The EEO and privacy notice at the end should be removed. Now, the introductory paragraphs: "SpaceX was founded under the belief..." and "SpaceXSI is building Super Intelligence..." - these are company description. Should I include them? The rule says preserve all substantive information. They are not boilerplate; they describe the company and mission. I'll include them as prose paragraphs before the sections. The "ABOUT THE ROLE:" section has a paragraph describing the role. That should be under an
About the role
with a. "RESPONSIBILITIES:" has a list of bullet points. The text shows a colon then a list. I'll make an
Responsibilities
and a- with each item as
- . Note that the first line "Work in a team environment with other engineering disciplines to provide detailed electrical design and specification for the installation of the following equipment and systems:" is an intro sentence, then a list of equipment/systems. Then additional responsibilities. I need to parse carefully.
Let me break down the responsibilities text:
"Work in a team environment with other engineering disciplines to provide detailed electrical design and specification for the installation of the following equipment and systems:
Electrical power distribution systems.
Switch-gear and motor control centers.
Exterior and interior lighting.
Ground support system controls and ladder logic.
Uninterruptible power supply (UPS) units.
Standby and emergency generators.
Automatic transfer switches.
Power monitoring hardware and software.
Data/phone distribution and wiring.
Building and site grounding systems.
Fire alarm systems and lightning protection systems.
Provide electrical engineering support to facility technicians to troubleshoot existing electrical equipment and controllers.
Provide engineering support for the design, operation, and troubleshooting of all the facility's electrical components and systems, including:
Load flow analysis of electrical power distribution systems.
Electrical equipment evaluation.
Building and facility equipment grounding.
Power monitoring hardware and software.
Ensure that all equipment interfaces properly with other mechanical and electrical systems, including compatibility with facility power budgets.
Coordinate all electrical installations and maintenance activities with local electrical utilities personnel.
Ensure all electrical designs and installations conform to applicable codes and regulations.
Provide code review and analysis utilizing NFPA 70E, NFPA 70 NEC, NFPA 497, NFPA 101, Vol 5 & 6 AFSPCMAN 91-710, and IBC."
This is a mix of a lead-in sentence, a list of equipment/systems, then several distinct responsibilities. I should structure as a list of responsibilities. The first part could be one responsibility: "Work in a team environment... for the installation of the following equipment and systems:" and then the sub-items could be a nested list? But the rule says use
- for any list of duties. Probably each bullet is a duty. The equipment/systems list is a list of items they design for. Could be a nested list, but simpler to make each a separate liability item. However, the text groups them under "the following equipment and systems:" then lists them. Then separate sentences for other responsibilities.
I'll treat each distinct duty as a list item. The equipment/systems list can be a sub-list or separate items. Since the rule says "use
- for any list of duties/requirements/benefits", I'll make a flat list of responsibilities, each as a
- . For the equipment/systems, I can include them as a single liability with a nested list, but that might be overcomplicating. The instruction: "Use
- for any list of duties/requirements/benefits". It doesn't forbid nested lists. But to keep it simple, I'll make each line a separate
- . However, the first line is a sentence that introduces the list. I'll combine: "Work in a team environment with other engineering disciplines to provide detailed electrical design and specification for the installation of the following equipment and systems: Electrical power distribution systems; Switch-gear and motor control centers; ..." but that's messy.
Better: Create a
- for responsibilities. The first
- contains the introductory sentence and then a nested
- for the equipment/systems. Then subsequent
- for each other responsibility.
Let's see: The responsibilities are:
1. Work in a team environment... for the installation of the following equipment and systems: (list of 12 items)
2. Provide electrical engineering support to facility technicians to troubleshoot existing electrical equipment and controllers.
3. Provide engineering support for the design, operation, and troubleshooting of all the facility's electrical components and systems, including: (list of 4 items)
4. Ensure that all equipment interfaces properly with other mechanical and electrical systems, including compatibility with facility power budgets.
5. Coordinate all electrical installations and maintenance activities with local electrical utilities personnel.
6. Ensure all electrical designs and installations conform to applicable codes and regulations.
7. Provide code review and analysis utilizing NFPA 70E, NFPA 70 NEC, NFPA 497, NFPA 101, Vol 5 & 6 AFSPCMAN 91-710, and IBC.
That's 7 main responsibilities, with two having sub-lists. I'll implement nested lists.
Similarly, BASIC QUALIFICATIONS: two bullet points (degree and experience). PREFERRED SKILLS AND EXPERIENCE: many bullet points.
Now, the introductory company paragraphs: I'll put them as
before the sections. No Pay, Schedule, Benefits sections because not mentioned. Now, output only HTML fragment. Let me write the HTML. First, company description paragraphs:
SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today, SpaceX is actively developing the technologies to make this possible, with the ultimate goal of making life multiplanetary and expanding consciousness to the stars.
SpaceXSI is building Super Intelligence to help humanity understand the universe. Our teams are building the full Super Intelligence stack: from our Colossus supercomputers, to Grok models, to our suite of applications, including Grok Bot, Grok Build, Grok Imagine, Grok Voice, and X. We're creating a powerful flywheel where more compute trains better models, better models power more useful products, and what we learn from people using those products shapes what we build next.
Then sections:About the role
As a member of the facility operations team, you will design, build, and activate some of the world’s most technically advanced facilities and data centers. You will be able to operate with autonomy to solve diverse and complex problems, excel at managing multiple projects simultaneously, and work in a dynamic, fast-paced environment. You will work with other MEP engineers, trade partners, and internal customers to support these goals and have the opportunity to drive real global impact, ultimately leading to making life multiplanetary.
Responsibilities
- Work in a team environment with other engineering disciplines to provide detailed electrical design and specification for the installation of the following equipment and systems:
- Electrical power distribution systems
- Switch-gear and motor control centers
- Exterior and interior lighting
- Ground support system controls and ladder logic
- Uninterruptible power supply (UPS) units
- Standby and emergency generators
- Automatic transfer switches
- Power monitoring hardware and software
- Data/phone distribution and wiring
- Building and site grounding systems
- Fire alarm systems and lightning protection systems
- Provide electrical engineering support to facility technicians to troubleshoot existing electrical equipment and controllers.
- Provide engineering support for the design, operation, and troubleshooting of all the facility's electrical components and systems, including:
- Load flow analysis of electrical power distribution systems
- Electrical equipment evaluation
- Building and facility equipment grounding
- Power monitoring hardware and software
- Ensure that all equipment interfaces properly with other mechanical and electrical systems, including compatibility with facility power budgets.
- Coordinate all electrical installations and maintenance activities with local electrical utilities personnel.
- Ensure all electrical designs and installations conform to applicable codes and regulations.
- Provide code review and analysis utilizing NFPA 70E, NFPA 70 NEC, NFPA 497, NFPA 101, Vol 5 & 6 AFSPCMAN 91-710, and IBC.
Basic Qualifications
- Bachelor’s degree in electrical engineering or other engineering discipline.
- 3+ years of professional experience working on electrical projects, power distribution systems, switchgear, UPS's, and/or generators.
Preferred Skills and Experience
- 5+ years of professional experience in a similar role.
- Professional Engineering (PE) license.
- Ability to read and understand power and control schematics.
- Ability to read and understand highly technical equipment operation and maintenance (O&M) manuals.
- Experience with variable frequency drives (VFDs) and industrial pumps.
- Experience with controls in MODBUS communication.
- Experience with medium voltage distribution.
- Experience with control panel design and production.
- Working knowledge of power coordination and arc flash.
- Ability to work on multiple tasks concurrently.
- High level of self-motivation, with the ability to work under minimal supervision.
- Good organizational skills.
- Ability to prioritize and schedule workload.
- Strong written and verbal communication skills.
- Work in a team environment with other engineering disciplines to provide detailed electrical design and specification for the installation of the following equipment and systems:
- for each other responsibility.
Let's see: The responsibilities are:
1. Work in a team environment... for the installation of the following equipment and systems: (list of 12 items)
2. Provide electrical engineering support to facility technicians to troubleshoot existing electrical equipment and controllers.
3. Provide engineering support for the design, operation, and troubleshooting of all the facility's electrical components and systems, including: (list of 4 items)
4. Ensure that all equipment interfaces properly with other mechanical and electrical systems, including compatibility with facility power budgets.
5. Coordinate all electrical installations and maintenance activities with local electrical utilities personnel.
6. Ensure all electrical designs and installations conform to applicable codes and regulations.
7. Provide code review and analysis utilizing NFPA 70E, NFPA 70 NEC, NFPA 497, NFPA 101, Vol 5 & 6 AFSPCMAN 91-710, and IBC.
That's 7 main responsibilities, with two having sub-lists. I'll implement nested lists.
Similarly, BASIC QUALIFICATIONS: two bullet points (degree and experience). PREFERRED SKILLS AND EXPERIENCE: many bullet points.
Now, the introductory company paragraphs: I'll put them as
- contains the introductory sentence and then a nested
- for any list of duties. Probably each bullet is a duty. The equipment/systems list is a list of items they design for. Could be a nested list, but simpler to make each a separate liability item. However, the text groups them under "the following equipment and systems:" then lists them. Then separate sentences for other responsibilities.
I'll treat each distinct duty as a list item. The equipment/systems list can be a sub-list or separate items. Since the rule says "use