CNC Machinist Level II - 1st Shift
for section headings (e.g. About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule). So we need to decide which sections have content.
We have:
- Job Summary: "We are looking for a CNC MACHINIST that can start working right away. The CNC Machinist will be responsible for the set-up and operation of CNC machines, editing of programs and tooling, and performing part inspections."
That's responsibilities.
- Job Requirements: list of duties (set-up, run, inspections, etc). That's responsibilities as well.
- Skill Requirements: list of experience, ability, etc. That's qualifications/skills.
- Why work for APP? list of benefits: training, medical, dental, vision, life insurance, overtime, vacation, holidays, sick time, annual bonus, 401k, ESOP, tuition reimbursement. That's Benefits.
- Compensation: $20.50 - $28.31 an hour. That's Pay.
- No explicit schedule.
- Also there is ITAR/export regulation info, citizenship requirement. That could be part of Requirements or Qualifications. Might be included under Requirements.
We must not repeat job title as heading. No Job ID.
We must remove boilerplate: EEO, accessibility, etc.
We need to preserve all substantive information. So include the citizenship requirement details.
We need to decide sections: About the role (maybe intro paragraph), Responsibilities, Requirements (or Qualifications), Skills, Benefits, Pay.
But we must avoid thin sections. Could combine Requirements and Skills into one "Requirements" or "Qualifications". However instruction says we can use those headings if content exists. We have both Skill Requirements and Job Requirements (which are more duties). Could treat Job Requirements as Responsibilities, and Skill Requirements as Qualifications/Skills.
Thus sections:
- About the role: intro paragraph about APP and opportunity.
- Responsibilities: list of duties from Job Requirements (set-up and run CNC equipment, editing programs/tooling, performing inspections, etc). Also includes "Perform any other duties not mentioned above when instructed..." etc.
- Qualifications: list from Skill Requirements (minimum 3 years experience, ability to follow instructions, fast paced, English, measuring devices, blueprint reading preferred). Also include ITAR/citizenship requirement.
- Benefits: list from Why work for APP? (training, medical/dental/vision, life insurance, overtime, vacation, holidays, sick time, annual bonus, 401k match, ESOP, tuition reimbursement).
- Pay: compensation range.
We should not include Schedule as none.
We must use - for any list of duties/requirements/benefits. Use
for prose.
We need to ensure we don't include filler like "commensurate with experience". Not present.
We must not repeat job title as heading.
We must not include Job ID.
We must not include application instructions.
We must not include cookie/navigation/legal/EEO etc. So remove lines about EEO, accessibility, etc.
We must preserve all substantive information: include the citizenship requirement details exactly as given.
Let's extract the relevant text.
Intro: "Aluminum Precision Products (APP) is an international leader in manufacturing aluminum forgings. We offer you the opportunity to be a part of a globally recognized organization that enjoys an unparalleled reputation for quality. Here you’ll be challenged on a daily basis, tasked with solving problems, working with smart, energetic, and dedicated people with an opportunity to grow and learn."
That's About the role.
Job Summary: "We are looking for a CNC MACHINIST that can start working right away. The CNC Machinist will be responsible for the set-up and operation of CNC machines, editing of programs and tooling, and performing part inspections."
Could be part of Responsibilities.
Job Requirements list:
- Make all necessary changes to tooling, programs, speeds, cutter paths under minimum supervision.
- Set-up and run CNC equipment.
- Perform in-process inspections and simple first article inspections.
- Perform buy-off for production at CNC machine centers with supervisor’s approval.
- Recognize and replace any dull or chipped tools.
- Document inspections as required.
- Keep accurate part counts.
- Re-evaluate and/or reject defected parts as required.
- Communicate effectively and professionally with employees across all levels and departments at APP.
- Work safe and maintain an organized, lean work environment.
- Strong commitment to good attendance and being on time as it is critical to meet production needs.
- Supply own measuring and hand tools.
- Perform any other duties not mentioned above when instructed to do so by the department manager.
Skill Requirements:
- Minimum 3 years’ experience with CNC machining and techniques.
- Ability to follow specific instructions and directions.
- Able to work in a demanding fast paced environment.
- English (reading, writing, verbal and comprehension).
- Use and read measuring devices necessary for inspection of machined parts.
- Training in blueprint-reading is preferred.
- This position may require access to information subject to the International Traffic in Arms Regulations (ITAR) and/or the Export Administration Regulations (EAR). To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C.1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Why work for APP? list:
- On-the-job training and opportunities for advancement with a strong promote within program.
- Medical, Dental, Vision – Generous company contribution, low cost to employee
- Life insurance – 100% company paid - covers employee, spouse and dependent children
- Overtime opportunity
- Generous Vacation Time
- 9 Paid Holidays
- Holiday Shut Down (Christmas thru New Year’s)
- Sick Time
- Annual Bonus (based on company meeting Key Results)
- 401k (Company matches up to 4%)
- ESOP Employee Profit Sharing Retirement Plan (100% Company Paid)
- Tuition reimbursement
Compensation: "$20.50 - $28.31 an hour. This is the lowest to highest hourly rate we in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee’s pay within the salary range will be based on several factors including, but limited to, relevant education, qualifications, certifications, experience, skills, seniority, geographic location, performance, and business or organizational needs."
Also later: "APP is an ESOP (Employee Stock Ownership Plan) Company and we are committed to the long term growth of our organization and employees. We offer an excellent benefits package including Medical, Dental, Vision, Life Insurance, and 401k plan. APP, Inc. engineers and manufactures certain products that are considered ITAR-controlled items under the International Traffic in Arms Regulations (ITAR). Consistent with ITAR, any position at APP, Inc. that involves work with the engineering or manufacturing functions of the Company may only be filled by a candidate who is (i) a citizen of the United States, or (ii) a person who has been accorded the privilege of residing permanently in the United States as an immigrant in accordance with the immigration laws. Are you a U.S. Citizen or U.S. Person? (U.S. Person = a natural person who is a lawful permanent resident as defined in 8 U.S.C. 1101(a)(20) or who is a protected individual as defined by 8 U.S.C. 1324b(a)(3).)"
This repeats citizenship requirement; we already have it. We can include it once.
We should not duplicate content. We'll include the citizenship requirement under Qualifications.
Now produce HTML.
Structure:
About the role
Aluminum Precision Products (APP) is an international leader in manufacturing aluminum forgings. We offer you the opportunity to be a part of a globally recognized organization that enjoys an unparalleled reputation for quality. Here you’ll be challenged on a daily basis, tasked with solving problems, working with smart, energetic, and dedicated people with an opportunity to grow and learn.
Responsibilities
- Make all necessary changes to tooling, programs, speeds, cutter paths under minimum supervision.
- Set-up and run CNC equipment.
- Perform in-process inspections and simple first article inspections.
- Perform buy-off for production at CNC machine centers with supervisor’s approval.
- Recognize and replace any dull or chipped tools.
- Document inspections as required.
- Keep accurate part counts.
- Re-evaluate and/or reject defected parts as required.
- Communicate effectively and professionally with employees across all levels and departments at APP.
- Work safe and maintain an organized, lean work environment.
- Strong commitment to good attendance and being on time as it is critical to meet production needs.
- Supply own measuring and hand tools.
- Perform any other duties not mentioned above when instructed to do so by the department manager.
Qualifications
- Minimum 3 years’ experience with CNC machining and techniques.
- Ability to follow specific instructions and directions.
- Able to work in a demanding fast paced environment.
- English (reading, writing, verbal and comprehension).
- Use and read measuring devices necessary for inspection of machined parts.
- Training in blueprint-reading is preferred.
- This position may require access to information subject to the International Traffic in Arms Regulations (ITAR) and/or the Export Administration Regulations (EAR). To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C.1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Benefits
- On-the-job training and opportunities for advancement with a strong promote within program.
- Medical, Dental, Vision – Generous company contribution, low cost to employee
- Life insurance – 100% company paid - covers employee, spouse and dependent children
- Overtime opportunity
- Generous Vacation Time
- 9 Paid Holidays
- Holiday Shut Down (Christmas thru New Year’s)
- Sick Time
- Annual Bonus (based on company meeting Key Results)
- 401k (Company matches up to 4%)
- ESOP Employee Profit Sharing Retirement Plan (100% Company Paid)
- Tuition reimbursement
Pay
$20.50 - $28.31 an hour. This is the lowest to highest hourly rate we in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee’s pay within the
for prose. We need to ensure we don't include filler like "commensurate with experience". Not present. We must not repeat job title as heading. We must not include Job ID. We must not include application instructions. We must not include cookie/navigation/legal/EEO etc. So remove lines about EEO, accessibility, etc. We must preserve all substantive information: include the citizenship requirement details exactly as given. Let's extract the relevant text. Intro: "Aluminum Precision Products (APP) is an international leader in manufacturing aluminum forgings. We offer you the opportunity to be a part of a globally recognized organization that enjoys an unparalleled reputation for quality. Here you’ll be challenged on a daily basis, tasked with solving problems, working with smart, energetic, and dedicated people with an opportunity to grow and learn." That's About the role. Job Summary: "We are looking for a CNC MACHINIST that can start working right away. The CNC Machinist will be responsible for the set-up and operation of CNC machines, editing of programs and tooling, and performing part inspections." Could be part of Responsibilities. Job Requirements list: - Make all necessary changes to tooling, programs, speeds, cutter paths under minimum supervision. - Set-up and run CNC equipment. - Perform in-process inspections and simple first article inspections. - Perform buy-off for production at CNC machine centers with supervisor’s approval. - Recognize and replace any dull or chipped tools. - Document inspections as required. - Keep accurate part counts. - Re-evaluate and/or reject defected parts as required. - Communicate effectively and professionally with employees across all levels and departments at APP. - Work safe and maintain an organized, lean work environment. - Strong commitment to good attendance and being on time as it is critical to meet production needs. - Supply own measuring and hand tools. - Perform any other duties not mentioned above when instructed to do so by the department manager. Skill Requirements: - Minimum 3 years’ experience with CNC machining and techniques. - Ability to follow specific instructions and directions. - Able to work in a demanding fast paced environment. - English (reading, writing, verbal and comprehension). - Use and read measuring devices necessary for inspection of machined parts. - Training in blueprint-reading is preferred. - This position may require access to information subject to the International Traffic in Arms Regulations (ITAR) and/or the Export Administration Regulations (EAR). To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C.1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Why work for APP? list: - On-the-job training and opportunities for advancement with a strong promote within program. - Medical, Dental, Vision – Generous company contribution, low cost to employee - Life insurance – 100% company paid - covers employee, spouse and dependent children - Overtime opportunity - Generous Vacation Time - 9 Paid Holidays - Holiday Shut Down (Christmas thru New Year’s) - Sick Time - Annual Bonus (based on company meeting Key Results) - 401k (Company matches up to 4%) - ESOP Employee Profit Sharing Retirement Plan (100% Company Paid) - Tuition reimbursement Compensation: "$20.50 - $28.31 an hour. This is the lowest to highest hourly rate we in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee’s pay within the salary range will be based on several factors including, but limited to, relevant education, qualifications, certifications, experience, skills, seniority, geographic location, performance, and business or organizational needs." Also later: "APP is an ESOP (Employee Stock Ownership Plan) Company and we are committed to the long term growth of our organization and employees. We offer an excellent benefits package including Medical, Dental, Vision, Life Insurance, and 401k plan. APP, Inc. engineers and manufactures certain products that are considered ITAR-controlled items under the International Traffic in Arms Regulations (ITAR). Consistent with ITAR, any position at APP, Inc. that involves work with the engineering or manufacturing functions of the Company may only be filled by a candidate who is (i) a citizen of the United States, or (ii) a person who has been accorded the privilege of residing permanently in the United States as an immigrant in accordance with the immigration laws. Are you a U.S. Citizen or U.S. Person? (U.S. Person = a natural person who is a lawful permanent resident as defined in 8 U.S.C. 1101(a)(20) or who is a protected individual as defined by 8 U.S.C. 1324b(a)(3).)" This repeats citizenship requirement; we already have it. We can include it once. We should not duplicate content. We'll include the citizenship requirement under Qualifications. Now produce HTML. Structure:
About the role
Aluminum Precision Products (APP) is an international leader in manufacturing aluminum forgings. We offer you the opportunity to be a part of a globally recognized organization that enjoys an unparalleled reputation for quality. Here you’ll be challenged on a daily basis, tasked with solving problems, working with smart, energetic, and dedicated people with an opportunity to grow and learn.
Responsibilities
- Make all necessary changes to tooling, programs, speeds, cutter paths under minimum supervision.
- Set-up and run CNC equipment.
- Perform in-process inspections and simple first article inspections.
- Perform buy-off for production at CNC machine centers with supervisor’s approval.
- Recognize and replace any dull or chipped tools.
- Document inspections as required.
- Keep accurate part counts.
- Re-evaluate and/or reject defected parts as required.
- Communicate effectively and professionally with employees across all levels and departments at APP.
- Work safe and maintain an organized, lean work environment.
- Strong commitment to good attendance and being on time as it is critical to meet production needs.
- Supply own measuring and hand tools.
- Perform any other duties not mentioned above when instructed to do so by the department manager.
Qualifications
- Minimum 3 years’ experience with CNC machining and techniques.
- Ability to follow specific instructions and directions.
- Able to work in a demanding fast paced environment.
- English (reading, writing, verbal and comprehension).
- Use and read measuring devices necessary for inspection of machined parts.
- Training in blueprint-reading is preferred.
- This position may require access to information subject to the International Traffic in Arms Regulations (ITAR) and/or the Export Administration Regulations (EAR). To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C.1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Benefits
- On-the-job training and opportunities for advancement with a strong promote within program.
- Medical, Dental, Vision – Generous company contribution, low cost to employee
- Life insurance – 100% company paid - covers employee, spouse and dependent children
- Overtime opportunity
- Generous Vacation Time
- 9 Paid Holidays
- Holiday Shut Down (Christmas thru New Year’s)
- Sick Time
- Annual Bonus (based on company meeting Key Results)
- 401k (Company matches up to 4%)
- ESOP Employee Profit Sharing Retirement Plan (100% Company Paid)
- Tuition reimbursement
Pay
$20.50 - $28.31 an hour. This is the lowest to highest hourly rate we in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee’s pay within the