Building Engineer II - Boston, MA (1st Shift)

We need to output HTML fragment with sections: About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule. Only include sections that have real specific content. The posting includes description of role (About the role). Responsibilities are listed. Requirements: maybe Minimum Qualifications. Skills: Required Knowledge, Skills & Abilities. Benefits, Pay, Schedule: not present. So we should not include those sections. Also we have "About UG2" which is company description; could be part of About the role? Probably not needed; but we could include as part of About the role? The instruction: do not repeat job title as heading; we can have About the role heading and then prose summarizing role. The posting includes a paragraph at start describing role. Also there is "About UG2" which is company info; could be omitted as not required? It's substantive but not about role; maybe we could include under About the role? But better to keep only role description. The instructions: Preserve ALL substantive information; do NOT invent or summarize away detail. So we need to keep all substantive info from posting. That includes the About UG2 paragraph. Where to put it? Could be a separate section like "About the Company" but not in allowed headings list. The allowed headings are only those listed; we should not create other headings. So we must fit that info somewhere within allowed sections, perhaps under About the role (mix role and company). But that would be mixing. However we could treat "About the role" as the role description and then include company info as a paragraph after that but still within same section? The instruction: Use

for section headings (e.g. About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule). It doesn't forbid other headings, but says use those for section headings. It says "include a section ONLY when the posting has real, specific content for it". It doesn't say we cannot have other headings, but likely they expect only those headings. Safer to stick to those headings and embed company info in About the role paragraph. Thus we will produce:

About the role

... (role description + company info)

Then Responsibilities:

• ... each duty. We need to preserve all substantive info: The responsibilities are broken into sections: Building Systems Operations & Maintenance, Inspections, Troubleshooting & Repairs, Preventive & Predictive Maintenance, Facility Services & Work Orders, Safety, Compliance & Emergency Response, Contractor, Vendor & Project Support. We should capture each bullet as list items. Could group under Responsibilities. Then Requirements: maybe Minimum Qualifications. Then Qualifications: maybe not separate; but we have Minimum Qualifications and maybe also "Required Knowledge, Skills & Abilities" which is Skills. So we have Requirements (maybe Minimum Qualifications) and Skills (Required Knowledge, Skills & Abilities). Qualifications maybe not needed; but we could combine Minimum Qualifications under Requirements and maybe also include "Ability to obtain and maintain required licenses, certifications, or credentials." That's part of qualifications. Thus sections: About the role, Responsibilities, Requirements, Skills. We must not include empty sections. Now craft HTML. We need to preserve all details: Let's extract role description paragraph: "The Building Engineer II is a skilled, mid-level facilities professional responsible for the safe, reliable, and efficient operation, maintenance, troubleshooting, and repair of building systems and infrastructure. The position performs journey-level work in one or more technical specialties while providing support across multiple building trades and facility services. Responsibilities may include HVAC, mechanical, electrical, plumbing, building automation and controls, life-safety systems, carpentry, masonry, painting, welding, machining, grounds, and general building maintenance. The Engineer II works independently or as part of a facilities team and exercises sound judgment in diagnosing equipment problems, prioritizing work, responding to emergencies, and coordinating maintenance activities." Then About UG2 paragraph: "Founded in 2012, UG2 is privately held and headquartered in Boston, Massachusetts. At UG2, we set the standard in facility services through our relentless pursuit of innovation and excellence. We take pride in exceeding client expectations and fostering a culture of continuous improvement. Every team member is integral to shaping our strategy and driving our mission. By embodying our commitment to service excellence, they directly contribute to UG2's growth and our reputation for delivering unparalleled results in a client-focused industry." We'll combine them. Now Responsibilities: list each duty from the headings. We need to capture all bullet points under each heading. Let's extract: Building Systems Operations & Maintenance: - Operate, monitor, inspect, and maintain HVAC, boilers, chillers, pumps, air-handling units, cooling towers, refrigeration, and other mechanical systems. - Operate and maintain electrical distribution, lighting, emergency power, generators, UPS systems, and related infrastructure within assigned responsibilities. - Maintain and troubleshoot plumbing, domestic water, sanitary, piping, valves, pumps, and fixtures. - Operate and monitor building automation/management systems (BAS/BMS), environmental controls, alarms, and automated equipment. - Maintain mechanical rooms, utility areas, equipment rooms, and general building infrastructure. - Support efficient building operation, occupant comfort, equipment reliability, and energy conservation. Inspections, Troubleshooting & Repairs: - Conduct routine inspections of facilities, equipment, and building systems to identify deficiencies, safety concerns, and maintenance needs. - Troubleshoot, diagnose, and repair mechanical, electrical, HVAC, plumbing, and other facility-system malfunctions. - Use technical manuals, drawings, schematics, meters, diagnostic equipment, and computerized systems to identify problems and determine corrective action. - Perform repairs, installations, replacements, modifications, and upgrades to building systems and infrastructure. - Escalate complex issues to supervisors, specialized technicians, engineers, or contractors when appropriate. Preventive & Predictive Maintenance: - Perform scheduled preventive and predictive maintenance on building systems and equipment. - Complete inspections, lubrication, filter and belt replacement, adjustments, cleaning, testing, calibration, and other routine maintenance. - Identify aging, deteriorating, or unreliable equipment and recommend repair, replacement, or improvement. - Maintain accurate maintenance histories and recommend adjustments to preventive-maintenance schedules as needed. Facility Services & Work Orders: - Respond to facility service requests and work orders in a timely and professional manner. - Prioritize work based on safety, urgency, operational impact, and established service requirements. - Utilize CMMS or other computerized facility-management systems to receive, update, document, and close work orders. - Maintain accurate records of work performed, materials used, equipment conditions, inspections, and follow-up requirements. - Communicate work status, operational impacts, delays, and recommended corrective actions to appropriate personnel. Safety, Compliance & Emergency Response: - Perform all work in accordance with applicable safety procedures, building and mechanical codes, environmental requirements, and organizational policies. - Follow lockout/tagout, confined-space, hot-work, fall-protection, electrical-safety, and other applicable safety procedures. - Support inspection, testing, and maintenance of fire protection, emergency power, alarms, and other life-safety systems. - Respond to building emergencies, equipment failures, utility interruptions, leaks, alarms, and other facility-related incidents. - Take appropriate action to protect people, property, equipment, and critical operations. - Participate in emergency response, after-hours, on-call, or rotating coverage as required. Contractor, Vendor & Project Support: - Coordinate with contractors, vendors, service providers, inspectors, and other outside resources. - Assist with quotes, service recommendations, scheduling, access, and coordination of contractor activities. - Monitor contractor work for safety, quality, and compliance with established requirements. - Support renovation, construction, equipment replacement, commissioning, and capital-improvement projects. - Assist with equipment start-up, testing, documentation, and project turnover. Now Requirements: Minimum Qualifications: - High school diploma or equivalent. - Technical training, vocational education, apprenticeship, or equivalent experience in building engineering, facilities maintenance, HVAC, electrical, plumbing, mechanical systems, or a related trade. - Typically 3–5 years of progressively responsible experience in facilities maintenance, building engineering, stationary engineering, commercial property maintenance, or a related technical field. - Ability to obtain and maintain required licenses, certifications, or credentials. Skills: Required Knowledge, Skills & Abilities: - Working knowledge of commercial or institutional building systems and facility operations. - Demonstrated troubleshooting and repair skills involving mechanical, HVAC, electrical, plumbing, or related systems. - Knowledge of preventive maintenance practices and facility-management principles. - Ability to read and interpret blueprints, schematics, technical manuals, drawings, and equipment documentation. - Ability to safely use hand tools, power tools, meters, test equipment, and maintenance equipment. - Working knowledge of CMMS and standard computer applications. - Strong problem-solving, organizational, communication, and customer-service skills. - Ability to prioritize multiple assignments, work independently, and respond effectively to changing operational needs. - Ability to recognize safety concerns and appropriately escalate complex or hazardous conditions. We should not include any fluff like "commensurate with experience". Not present. Now produce HTML. We'll wrap each section in

  and then

  or

  . For About the role: we have two paragraphs; we can combine into one

  with both paragraphs separated by a space or
  ? Use

  containing both sentences; we can just put them as separate sentences within same

  . Thus:

  About the role

  The Building Engineer II is a skilled, mid-level facilities professional responsible for the safe, reliable, and efficient operation, maintenance, troubleshooting, and repair of building systems and infrastructure. The position performs journey-level work in one or more technical specialties while providing support across multiple building trades and facility services. Responsibilities may include HVAC, mechanical, electrical, plumbing, building automation and controls, life-safety systems, carpentry, masonry, painting, welding, machining, grounds, and general building maintenance. The Engineer II works independently or as part of a facilities team and exercises sound judgment in diagnosing equipment problems, prioritizing work, responding to emergencies, and coordinating maintenance activities. Founded in 2012, UG2 is privately held and headquartered in Boston, Massachusetts. At UG2, we set the standard in facility services through our relentless pursuit of innovation and excellence. We take pride in exceeding client expectations and fostering a culture of continuous improvement. Every team member is integral to shaping our strategy and driving our mission. By embodying our commitment to service excellence, they directly contribute to UG2's growth and our reputation for delivering unparalleled results in a client-focused industry.

  Then Responsibilities:

  Responsibilities

  • Operate, monitor, inspect, and maintain HVAC, boilers, chillers, pumps, air-handling units, cooling towers, refrigeration, and other mechanical systems.
  • Operate and maintain electrical distribution, lighting, emergency power, generators, UPS systems, and related infrastructure within assigned responsibilities.
  • Maintain and troubleshoot plumbing, domestic water, sanitary, piping, valves, pumps, and fixtures.
  • Operate and monitor building automation/management systems (BAS/BMS), environmental controls, alarms, and automated equipment.
  • Maintain mechanical rooms, utility areas, equipment rooms, and general building infrastructure.
  • Support efficient building operation, occupant comfort, equipment reliability, and energy conservation.
  • Conduct routine inspections of facilities, equipment, and building systems to identify deficiencies, safety concerns, and maintenance needs.
  • Troubleshoot, diagnose, and repair mechanical, electrical, HVAC, plumbing, and other facility-system malfunctions.
  • Use technical manuals, drawings, schematics, meters, diagnostic equipment, and computerized systems to identify problems and determine corrective action.
  • Perform repairs, installations, replacements, modifications, and upgrades to building systems and infrastructure.
  • Escalate complex issues to supervisors, specialized technicians, engineers,