Assembly Technician

We need to output HTML fragment with sections: h3 for headings like About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule. We must not repeat job title as heading. We need to include only sections with real specific content. Let's parse the job description. Job Title: Assembly Technician (already shown elsewhere). We'll not repeat. Content: - About the role: The description includes a paragraph: "This Assembly Technician role supports both prototype development and production activities for cutting-edge unmanned aerial vehicle (UAV) electronic systems. You will work hands-on with circuit boards and system-level electronics to test, assemble, and troubleshoot advanced aerospace and defense technologies, contributing directly to products that support real-world defense missions." That's about the role. So we can have

About the role

with

that paragraph. - Responsibilities: There's a list of responsibilities (multiple sentences). We'll extract bullet list. Responsibilities bullet points: - Test, troubleshoot, and validate electronic assemblies and embedded systems used in unmanned aerial vehicles (UAVs). - Build and assemble prototype electronics, including circuit boards, printed circuit board assemblies (PCBA), wire harnesses, cable harnesses, and system-level assemblies. - Perform quality inspections and functional testing of electronic components and assemblies to ensure they meet specifications and design requirements. - Support engineering development activities by assembling, wiring, and testing prototype hardware for new designs and system upgrades. - Collaborate closely with electrical engineers and other team members to identify, diagnose, and resolve issues discovered during testing and production. - Utilize standard electronic test equipment, including oscilloscopes, multimeters, signal generators, power supplies, diagnostic tools, and soldering equipment, to perform bench testing and troubleshooting. - Read and interpret technical drawings, blueprints, schematics, and work instructions to perform accurate assembly, wiring, and rework. - Execute test procedures, calibration activities, and inspection steps to verify proper operation and compliance with requirements. - Perform electronics repair, rework, and root cause analysis on circuit boards, electro-mechanical assemblies, and system-level hardware. - Support system integration activities, including avionics and embedded systems integration, to ensure proper operation at the system level. - Document test results, assembly procedures, work steps, and technical findings in a clear and traceable manner. - Support both engineering prototype builds and production manufacturing efforts in a mixed development and manufacturing environment. - Apply working knowledge of IPC and acceptability standards during assembly, soldering, inspection, and quality checks. - Maintain a strong commitment to quality workmanship, attention to detail, and adherence to established processes and work instructions. We'll put these in

• . - Essential Skills: This is a list of skills. Could be under Skills or Requirements. The instruction says use headings like Skills, Requirements, Qualifications. We have "Essential Skills" list. We'll put under

  Skills

  with
  . List: - Hands-on experience in electronics testing, assembly, and troubleshooting. - Experience working with circuit boards, printed circuit boards (PCB), printed circuit board assemblies (PCBA), and system-level electronics. - Experience with electronic assembly, including soldering, wiring, and harness assembly. - Experience in aerospace, defense industry, or military electronics, including technical military occupational specialties. - Working knowledge and understanding of IPC standards, including J-STD-001, IPC-A-610, and IPC-A-620. - Proficiency with standard electronic test equipment such as oscilloscopes, multimeters, signal generators, power supplies, and other diagnostic equipment. - Ability to read and interpret technical drawings, blueprints, schematics, and detailed work instructions. - Experience with functional testing, validation, verification, and bench testing of electronic assemblies and systems. - Ability to perform system integration tasks for electronics, embedded systems, and avionics hardware. - Strong troubleshooting skills, including root cause analysis of electronic and electro-mechanical issues. - Strong attention to detail and a demonstrated commitment to high-quality workmanship. - Ability to work both independently and as part of a collaborative engineering and production team. - Ability to work effectively in both engineering development and production manufacturing environments. - Eligibility as a U.S. Person as defined by applicable export control regulations, with the ability to access controlled technical information. We'll include these. - Work Environment: This is a paragraph describing environment and schedule. Could be under Schedule or maybe separate heading like Work Environment not in list but we can incorporate into Schedule or maybe a separate heading like Work Environment not required but we can put under Schedule if schedule info present. The schedule: "This position is fully onsite in Madison, Alabama, with a typical schedule of 6:00 a.m. to 3:30 p.m." Also description of environment. We could create a

  Schedule

  with that sentence. Also maybe a

  Work Environment

  but not in allowed headings list; but we could put under Schedule or maybe under About the role? Better to create Schedule heading for the schedule and maybe include environment details in a paragraph under Schedule or maybe a separate heading like Work Environment not required but we can still include if we want but instruction says use headings for section headings (e.g. About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule). It says "use

  for section headings (e.g. About the role, Responsibilities, Requirements, Qualifications, Skills, Benefits, Pay, Schedule)." It doesn't forbid other headings, but suggests those as examples. Safer to stick to those. So we can put schedule info under Schedule heading. The work environment details could be included in About the role or maybe a separate paragraph under Schedule? We'll include schedule and maybe also mention work environment in same paragraph. - Pay And Benefits: There's a Pay range and benefits list. So we need Pay and Benefits sections. According to instruction: "Prefer a few substantive sections over many thin ones." We could combine Pay and Benefits into one section? But they are separate headings allowed. We'll create

  Pay

  with the pay range paragraph. And

  Benefits

  with the benefits list. We must not include filler like "commensurate with experience" etc. The pay range is specific: $22.00 - $32.00/hr. That's substantive. Benefits list is substantive. We must not include Job ID/requisition numbers, application instructions, boilerplate, EEO, etc. So we remove all that. We also need to remove duplicated lines, navigation, cookie, legal, etc. So we strip out the Actalent description, equal opportunity, accommodation, SF Fair Chance, Massachusetts Lie Detector, AI use, etc. Also remove "Job Type & Location" maybe not needed as heading; but we could incorporate location into About the role or Schedule? The location is Madison, AL. Already in schedule. We'll keep location in schedule paragraph. We also need to remove "Application Deadline" etc. Now produce HTML fragment:

  About the role

  This Assembly Technician role supports both prototype development and production activities for cutting-edge unmanned aerial vehicle (UAV) electronic systems. You will work hands-on with circuit boards and system-level electronics to test, assemble, and troubleshoot advanced aerospace and defense technologies, contributing directly to products that support real-world defense missions.

  Responsibilities

  • Test, troubleshoot, and validate electronic assemblies and embedded systems used in unmanned aerial vehicles (UAVs).
  • Build and assemble prototype electronics, including circuit boards, printed circuit board assemblies (PCBA), wire harnesses, cable harnesses, and system-level assemblies.
  • Perform quality inspections and functional testing of electronic components and assemblies to ensure they meet specifications and design requirements.
  • Support engineering development activities by assembling, wiring, and testing prototype hardware for new designs and system upgrades.
  • Collaborate closely with electrical engineers and other team members to identify, diagnose, and resolve issues discovered during testing and production.
  • Utilize standard electronic test equipment, including oscilloscopes, multimeters, signal generators, power supplies, diagnostic tools, and soldering equipment, to perform bench testing and troubleshooting.
  • Read and interpret technical drawings, blueprints, schematics, and work instructions to perform accurate assembly, wiring, and rework.
  • Execute test procedures, calibration activities, and inspection steps to verify proper operation and compliance with requirements.
  • Perform electronics repair, rework, and root cause analysis on circuit boards, electro-mechanical assemblies, and system-level hardware.
  • Support system integration activities, including avionics and embedded systems integration, to ensure proper operation at the system level.
  • Document test results, assembly procedures, work steps, and technical findings in a clear and traceable manner.
  • Support both engineering prototype builds and production manufacturing efforts in a mixed development and manufacturing environment.
  • Apply working knowledge of IPC and acceptability standards during assembly, soldering, inspection, and quality checks.
  • Maintain a strong commitment to quality workmanship, attention to detail, and adherence to established processes and work instructions.

  Skills

  • Hands-on experience in electronics testing, assembly, and troubleshooting.
  • Experience working with circuit boards, printed circuit boards (PCB), printed circuit board assemblies (PCBA), and system-level electronics.
  • Experience with electronic assembly, including soldering, wiring, and harness assembly.
  • Experience in aerospace, defense industry, or military electronics, including technical military occupational specialties.
  • Working knowledge and understanding of IPC standards, including J-STD-001, IPC-A-610, and IPC-A-620.
  • Proficiency with standard electronic test equipment such as oscilloscopes, multimeters, signal generators, power supplies, and other diagnostic equipment.
  • Ability to read and interpret technical drawings, blueprints, schematics, and detailed work instructions.
  • Experience with functional testing, validation, verification, and bench testing of electronic assemblies and systems.
  • Ability to perform system integration tasks for electronics, embedded systems, and avionics hardware.
  • Strong troubleshooting skills, including root cause analysis of electronic and electro-mechanical issues.
  • Strong attention to detail and a demonstrated commitment to high-quality workmanship.
  • Ability to work both independently and as part of a collaborative engineering and production team.
  • Ability to work effectively in both engineering development and production manufacturing environments.
  • Eligibility as a U.S. Person as defined by applicable export control regulations, with the ability to access controlled technical information.

  Schedule

  This position is fully onsite in Madison, Alabama, with a typical schedule of 6:00 a.m. to 3:30 p.m. You will work in a combined engineering development and production manufacturing environment focused on advanced UAV electronics and drone technology, using electronic test equipment such as oscilloscopes, multimeters, signal generators, power supplies, soldering tools, and diagnostic instruments at the bench, handling circuit boards, harness assemblies, and electromechanical systems in a lab and shop setting while following formal work instructions, test procedures, and quality standards.

  Pay

  The pay range for this position is $22.00 - $32.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors.

  Benefits

  • Medical, dental & vision
  • Critical Illness, Accident, and Hospital
  • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available