Assembler 2nd Shift Fenton, MO

Responsibilities

1. Obtain work order from your lead person.
2. Check the bill of material for description, quantity, and parts needed to build the product.
3. Read the routing carefully and report labor against the proper sequence.
4. Review the work order for any special instructions. If unclear, ask your lead person or supervisor for clarification.
5. Request a production assembly drawing from your lead person, supervisor, or inspector when required.
6. Inspect all parts as they are being used.
7. Flanges must be inspected 100% with a .0015 feeler gauge. The gauge can go no deeper than 1/8 max.
8. Check for porosity, torn threads, bad paint, missing features, etc., per instructions from your routings, drawings, lead person, or supervisor.
9. Lubricate all indicated threaded areas.
10. Remove nonconforming or questionable material to designated areas until a determination can be made.
11. Communicate any problems with the assembly (e.g., bad parts, equipment, fixtures, tools, drawings, or unclear work instructions) to your lead person, supervisor, or inspector for corrective action.
12. Clear your work area and put all consumable parts in their place after completing each work order.
13. Return special tools, equipment, and drawings to where they belong.
14. Use downtime constructively: fill your bins with consumable parts, clean your area, and be prepared for your next work order or instructions.

Requirements

• Electrical wiring background
• Able to lift up to 35 lbs. continuously

Benefits

Ampcus is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veterans or individuals with disabilities.